SK135 SK200 SK210 SK330 Heavy Equipment Demolition Concrete Crusher Hydraulic

Product Specification

SK135 SK200 SK210 SK330 Heavy Equipment Pulverizer Demolition Concrete Crusher Hydraulic Pulverizer

Hydraulic pulverizer
Hydraulic pulverizer is composed with body, hydraulic cylinder, movable jaw and fixed jaw. The external hydraulic system offer hydraulic pressure for the hydraulic cylinder to make the movable jaw and fixed jaw open and close to achieve the effect of crushing objects.
1. Large bore dual cylinders: Strong power and excellent durability.
2. Speed up valve: Fast cycle time.
3. Lighter and stronger structure: Material Hardo x 400-500;high precision
4. 360 degree hydraulic rotation optional.
5. Working efficiency is two or three times of hydraulic breaker
6. Large opening design,working easily and conveniently.
7. Equipped with steel bar cutter, fufill crushing and cutting off exposed reinforced steel at same time.
8. Low noise, can be used for city and high-tech

AppliCATEEEEEEEEion works
Steel barcutter is installed on the inner side to cut off the exposed steel bar while smashing the concrete,and directly demolish the building, the house and other buildings. The material makes the crushing work more efficient.

Product selling point:
1.The use of CNC head boring process, high precision, high concentricity, more durable
2.Optional installation of acceleration valve
3.Light weight, good wear resistance; Using excavator bucket rod connection design, low failure rate, short working cycle, flexible operation
4.The blade is made of imported material (special alloy steel process), durable and easy to replace. Threaded hole design, if there is any material stuck, can be quickly eliminated by adjusting the blade
5.Integrated mechanical design, more durable, more bite force
6.The main knife plate is made of European Krup p material, and the body is designed by Q355B manganese plate, with high strength, light weight and good wear resistance
7.Wear - resistant wire, more bite force, durable

SK135 SK200 SK210 SK330 Heavy Equipment Pulverizer Demolition Concrete Crusher Hydraulic Pulverizer

Our Excavator Hydraulic Pulverizer Product Parameter

Notes for product use:
Only reasonable and correct use of a good product can effectively improve work efficiency, but also ensure the service life of the product:
1. The pressure of crushing pliers shall be controlled within the specified range when used. If the pressure is too high, it is easy to damage the oil seal and other parts of the oil cylinder.
2. The teeth of the forceps head are wear-resisting head. When wear occurs in use, wear-resisting welding wire should be used in time to prevent serious wear and tooth head from being worn off.
3. Before the first use of new equipment, each grease nozzle should be thoroughly filled with butter until overflow, and hit at least 2 times per shift when used again. When using, it is required to bite with force, not side bias bite, and regularly maintain and replace the oil cylinder seal in time. (The oil seal is a vulnerable part. It is recommended to replace the oil seal once every 6-12 months according to the customer's use frequency. The damage of the oil seal is easy to strain the oil cylinder and cannot be repaired.)
4. After stopping the operation, timely check whether the bolt of the pipe joint and the oil cylinder is loose due to the collision of the seat caused by long time work, and find the phenomenon of oil leakage and
Bolt loosening can be manually tightened with after rods to avoid unnecessary losses!
5. When crushing pliers are placed for a long time, the oil cylinder can not suppress pressure and withdraw the oil cylinder for placement.
Good equipment depends on use and maintenance!