ROSCHEN GROUP
| Supply Ability | 10000 pcs |
| Packaging Details | Wooden Box |
| Name | Down The Hole Hammer |
| Material | Carbon Steel |
| Processing Type | Forging |
| Use | mining tool |
| Feature | Continuous Sampling |
| Brand Name | ROSCHEN |
| Model Number | size 3" 3.5" 4" 5" 6" 8" 10" 12" |
| Certification | ISO9001 |
| Place of Origin | GERMANY |
View Detail Information
Explore similar products
CIR90 Hard Rock Drilling DTH Drill Bits 90mm For Stone Quarrying , High and low
CIR90 Down The Hole Hammer and Button Bits for Rotary Impact Drilling
CIR100 Lower Pressure Down The Hole Hammer For Drilling Faster Rock Penetration
Mincon Dth Hammers M30 M40 M50 M60 M80 Series , Precision Down The Hole Mining
Product Specification
| Supply Ability | 10000 pcs | Packaging Details | Wooden Box |
| Name | Down The Hole Hammer | Material | Carbon Steel |
| Processing Type | Forging | Use | mining tool |
| Feature | Continuous Sampling | Brand Name | ROSCHEN |
| Model Number | size 3" 3.5" 4" 5" 6" 8" 10" 12" | Certification | ISO9001 |
| Place of Origin | GERMANY | ||
| High Light | dth drilling tools ，down hole hammer | ||
QL40 QL50 QL60 QL80 Down The Hole Hammer With Continuous Sampling
Down The Hole Hammer Introduction
Reverse circulation drilling is also called central sample collection or double-wall drilling. This type of drilling usually uses a double-wall drill pipe. Drilling force is high wind pressure gas, which enters into the hammer through the gap between the outer pipe and the inner pipe. The hammer hit the drill bit to break rock, and the broken rock is collected into the pores on the drill bit surface, and then the rock samples are collected through the sample collection pipe and the drill pipe.
Down The Hole Hammer Features
1. Simple internal structure, good rigidity of parts, ensuring the long service life and convenient maintenance.
2. Collection tube is an integral type, which can be replaced without removing the hammer. After carburizing treatment, the collection tube is good in wear resistance.
3. With the patented design of the drill bit, it only needs to replace the drill bit. The same hammer can be used for holes of different sizes, and the samples can be guaranteed to be free from contamination.
4. The sampling work can be done well, even under various difficult conditions such as loose soil, hard rock and large amount of water.
Down The Hole Hammer Specifications
| Hammer Size | Bit Shank | ROSCHEN Code | Connection Thread | Suitable bit | Working pressure | Air consumption | |
| 1" | BR1 | ROS 11 | RD50 box | ￠50-70mm | 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min |
| 1.0Mpa | 4m3/min | ||||||
| 1.4Mpa | 5m3/min | ||||||
| 2" | BR2 | ROS 22 | RD50 box | ￠70-￠90mm | 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min |
| 1.0Mpa | 4m3/min | ||||||
| 1.4Mpa | 5m3/min | ||||||
| 3" | DHD3.5 | ROS 32 | API 2 3/8" Reg | ￠90-￠110mm | 1.0-1.5Mpa | 1.0Mpa | 4.5m3/min |
| COP32/COP34 | |||||||
| M30 | 1.5Mpa | 9m3/min | |||||
| 4" | DHD340 | ROS 34 | API 2 3/8" Reg | ￠110-￠135mm | 1.0-2.5Mpa | 1.0Mpa | 6m3/min |
| COP44 | |||||||
| QL40 | |||||||
| SD4 | 1.8Mpa | 10m3/min | |||||
| M40 | 2.4Mpa | 15m3/min | |||||
| 5" | DHD350 | ROS 52 ROS 54 | API 2 3/8" Reg /API 3 1/2" Reg | ￠135-￠155mm | 1.0-2.5Mpa | 1.0Mpa | 9m3/min |
| COP54 | |||||||
| QL50 | |||||||
| SD5 | 1.8Mpa | 15m3/min | |||||
| M50 | 2.4Mpa | 23m3/min | |||||
| 6" | DHD360 | ROS 62 ROS 64 | API 3 1/2" Reg | ￠155-￠190mm | 1.0-2.5Mpa | 1.0Mpa | 10m3/min |
| COP64 | |||||||
| QL60 | |||||||
| SD6 | 1.8Mpa | 20m3/min | |||||
| M60 | 2.4Mpa | 28.5m3/min | |||||
| 8" | DHD380 | ROS 82 ROS 84 | API 4 1/2" Reg | ￠195-￠254mm | 1.0-2.5Mpa | 1.0Mpa | 15m3/min |
| COP84 | |||||||
| QL80 | 1.8Mpa | 26m3/min | |||||
| SD8 | 2.4Mpa | 34m3/min | |||||
| M80/M85 | |||||||
| 10" | SD10 | ROS 100 | API 6 5/8" Reg | ￠254-￠311mm | 1.0-2.5Mpa | 1.0Mpa | 22m3/min |
| Numa100 | 1.8Mpa | 40m3/min | |||||
| ROS 100 | 2.4Mpa | 55m3/min | |||||
| 12" | DHD1120 | ROS 120 | API 6 5/8" Reg | ￠305-￠445mm | 1.0-2.5Mpa | 1.0Mpa | 30m3/min |
| SD12 | 1.8Mpa | 56m3/min | |||||
| Numa120 | 2.4Mpa | 78m3/min | |||||
| Notes: | |||||||
| Metzke, Remet thread is available! | |||||||
| Any special type shank of DTH Hammer will be available by requests. | |||||||
| 1. Methods of Payment: |
| T/T (Telegraphic Transfer) or Western Union or L/C at sight |
| 2. Handling time for an order |
| Only 3or 4 days if we have stock on your request size. Based on order quantity, normally it takes 25 days for production. |
| 3. Shipping way |
| Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air Bulk order: we suggest by air or by sea. |
| 4. Quality Control |
| We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. |
| 5. After Services: |
| (1). Our sales team will response for your question within 24 hours (Holidays Excluded) (2). Technical Support will be available in any time (3). Free replacement will provide once the failure confirmed caused by our product quality |
| 6.How can we trust your company? |
| We support made-in china and Alibaba trade insurance. Protecting products quality, shipment on time and your covered amount. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
1921
Total Annual:
5000-2000000
Employee Number:
100~500
Ecer Certification：
Verified Supplier
ROSCHEN GROUP ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mine... ROSCHEN GROUP ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mine...
Get in touch with us
Leave a Message, we will call you back quickly!