ROSCHEN GROUP
| Supply Ability | 100000 pcs |
| Packaging Details | Poly wooden box |
| Name | Down The Hole Hammer |
| Application | ore mining,underground mining teeth |
| Color | Accept customization |
| Hammer material | Steel |
| Warranty | 1 Year |
| Condition | New |
| Brand Name | ROSCHEN |
| Model Number | 8" |
| Certification | ISO |
| Place of Origin | Germany |
View Detail Information
Explore similar products
CIR90 Hard Rock Drilling DTH Drill Bits 90mm For Stone Quarrying , High and low
CIR90 Down The Hole Hammer and Button Bits for Rotary Impact Drilling
CIR100 Lower Pressure Down The Hole Hammer For Drilling Faster Rock Penetration
Mincon Dth Hammers M30 M40 M50 M60 M80 Series , Precision Down The Hole Mining
Product Specification
| Supply Ability | 100000 pcs | Packaging Details | Poly wooden box |
| Name | Down The Hole Hammer | Application | ore mining,underground mining teeth |
| Color | Accept customization | Hammer material | Steel |
| Warranty | 1 Year | Condition | New |
| Brand Name | ROSCHEN | Model Number | 8" |
| Certification | ISO | Place of Origin | Germany |
| High Light | QL60 Drilling Down The Hole Hammer ，High Air Pressure DTH hammer ，Wear Resistance DTH Hammer | ||
Reverse Circulation Down The Hole Hammer High Air Pressure Wear Resistance
Down The Hole Hammer Introduction
The DTH Hammer, RC hammer is used to remove rock samples which are pushed through the machine with compressed air. When air is blown down the annulus (ring-shaped structure) of the rod, the pressure shift creates a reverse circulation, bringing the cuttings up the inner tube. When the cuttings reach a deflector box at the top of the rig, the matter is moved through a hose attached to the top of the cyclone.
The drill cuttings will travel around the cyclone until they fall through the bottom opening into a sample bag. These bags are marked with the location and depth of the place where the sample was collected and can be transported directly to the assay lab for analysis.
Down The Hole Hammer Characteristics
1. This kind of hammer is designed as a strong-wind system, which can have all the high-pressure gas flush off with an aim that keep the hole's bottom clean. The durable piston on the hardness treatment can have two end changed, which can extend the working life.
2. Designed a changeable vapour look, which can change the gas charge according to rock’s hardness and abrasion resistance to realize the best flash effect and highest drilling efficiency.
3. Simple structure and few but wearable spare parts make longer working time.
Down The Hole Hammer Parameters
| ROSCHEN DTH Hammers Specifications | |||||||
| Hammer Size | Bit Shank | ROSCHEN Code | Connection Thread | Suitable bit | Working pressure | Air consumption | |
| 2" | BR2 | ROS 11 ROS 22 | RD50 box | ￠70-￠90mm | 0.7-1.75Mpa | 0.7Mpa | 4.5m3/min |
| 1.0Mpa | 4m3/min | ||||||
| 1.4Mpa | 5m3/min | ||||||
| 3" | DHD3.5 | ROS 32 | API 2 3/8" Reg | ￠90-￠110mm | 1.0-1.5Mpa | 1.0Mpa | 4.5m3/min |
| COP32/COP34 | |||||||
| M30 | 1.5Mpa | 9m3/min | |||||
| 4" | DHD340 | ROS 34 | API 2 3/8" Reg | ￠110-￠135mm | 1.0-2.5Mpa | 1.0Mpa | 6m3/min |
| COP44 | |||||||
| QL40 | |||||||
| SD4 | 1.8Mpa | 10m3/min | |||||
| M40 | 2.4Mpa | 15m3/min | |||||
| 5" | DHD350 | ROS 52 ROS 54 | API 2 3/8"Reg/API 3 1/2" Reg | ￠135-￠155mm | 1.0-2.5Mpa | 1.0Mpa | 9m3/min |
| COP54 | |||||||
| QL50 | |||||||
| SD5 | 1.8Mpa | 15m3/min | |||||
| M50 | 2.4Mpa | 23m3/min | |||||
| 6" | DHD360 | ROS 62 ROS 64 | API 3 1/2" Reg | ￠155-￠190mm | 1.0-2.5Mpa | 1.0Mpa | 10m3/min |
| COP64 | |||||||
| QL60 | |||||||
| SD6 | 1.8Mpa | 20m3/min | |||||
| M60 | 2.4Mpa | 28.5m3/min | |||||
| 8" | DHD380 | ROS 82 ROS 84 | API 4 1/2" Reg | ￠195-￠254mm | 1.0-2.5Mpa | 1.0Mpa | 15m3/min |
| COP84 | |||||||
| QL80 | 1.8Mpa | 26m3/min | |||||
| SD8 | 2.4Mpa | 34m3/min | |||||
| M80/M85 | |||||||
| 10" | SD10 | ROS 100 | API 6 5/8" Reg | ￠254-￠311mm | 1.0-2.5Mpa | 1.0Mpa | 22m3/min |
| Numa100 | 1.8Mpa | 40m3/min | |||||
| ROS 100 | 2.4Mpa | 55m3/min | |||||
| 12" | DHD1120 | ROS 120 | API 6 5/8" Reg | ￠305-￠445mm | 1.0-2.5Mpa | 1.0Mpa | 30m3/min |
| SD12 | 1.8Mpa | 56m3/min | |||||
| Numa120 | 2.4Mpa | 78m3/min | |||||
| Notes: | |||||||
| Metzke, Remet thread is available! | |||||||
| Any special type shank of DTH Hammer will be available by requests. | |||||||
Down The Hole Hammer Details
FAQ
Terms & Conditions of Ordering:
Quality warranty:
Our products are made of high quality steel and all spares parts are inspected strictly before shipping. We have quickly responses for your complaint and suggestion.
Package:
Using ply-wooden cases and pallet for package to protect the products and avoid the damage during transportation. Also we can customize package according to your special requests.
Production time:
Generally need 15-25 days
Transportation:
By air, By Express or By sea according to your requests.
1. Methods of Payment:
T/T (Telegraphic Transfer) or Western Union or L/C at sight
2. Handling time for an order
Based on order quantity, normally it takes 20 days for production.
in 3 working days after receiving the advance payment
3. Shipping way
Sample order: we suggest Courier express like DHL/UPS/TNT/FEDEX or by air
Bulk order: we suggest by air or by sea.
4. Quality Control
We have our own experienced QC.
There will be strict inspection and testing for every order before shipping out.
5. After Services:
a. Our sales team will response for your question within 24 hours (Holidays Excluded)
b. Technical Support will be available in any time
6. Quality & Service:
A. There will be strict inspection and testing for every order before shipping out.
B. Our sales team and Technical Support will response for your question within 24 hours through skype: ROSCHEN.TOOL and WhatsApp/Wechat: +86-13764195009
C. Free replacement will provide once the failure confirmed caused or our product quality; Not satisfied with a refund.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
1921
Total Annual:
5000-2000000
Employee Number:
100~500
Ecer Certification：
Verified Supplier
ROSCHEN GROUP ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mine... ROSCHEN GROUP ROSCHEN Group has the world class advanced equipment like 12000 tons forging, metal processing plant, heat treatment workshop, numerical control plant, Advanced five-axis machining center, etc. professional technical and skilled team to ensure mining, mine...
Get in touch with us
Leave a Message, we will call you back quickly!