Automatic IML HDPE Blow Molding Machine 3 Head 10L for Bottles and Jars

An automatic IML HDPE blow molding machine turns a packaging line into a hands-off operation: load resin, select a recipe, and the machine blows, labels and trims without operator intervention. This automatic IML HDPE blow molding machine combines three extrusion heads with in-mould labelling and a three-mode controller, so bottles and jars come off decorated and ready to fill. For a converter scaling from pilot to volume, an automatic IML HDPE blow molding machine removes the labour step that usually bottlenecks output and keeps quality uniform across a long shift.

Semi Auto and Full Auto modes let a new team learn on this machine before handing it to steady-state production, while Manual mode helps during mould trials and maintenance. That three-step progression means an automatic IML HDPE blow molding machine can be commissioned without taking skilled staff off other lines for days.

Automation here is not just buttons; it is the machine deciding timing. The controller synchronises extrusion, clamping, blowing, labelling and trimming, and it watches melt temperature and clamp pressure continuously. When something drifts, the automatic fault alarm reports it before a bad part leaves the mould, so the automatic IML HDPE blow molding machine protects the run rather than waiting for an inspection table to catch the problem.

• Three modes: Manual, Semi Auto, Full Auto on the same controller.
• Fault alarm: automatic diagnosis flags issues before they spoil a run.
• 40-recipe memory: instant recall for bottles and jars.
• Integrated IML: labelling timed by the machine controller.
• Safety interlocks: mould cannot close while the guard is open.

Dairy and beverage 0.5-2 L bottles, cosmetic jars and lubricant containers all suit this rig, because the label carries branding that must look sharp straight off the mould. Household 5-10 L jars also benefit, where the machine keeps pace with large annual volumes without an operator at every station.

Commissioning is worth a note for anyone weighing the step up to automation. Because the modes step from Manual to Semi Auto to Full Auto, a factory can qualify the machine gradually, run a first order under supervision, and only move to unattended running once the process window is proven. Experienced operators usually find the transition takes a shift or two rather than a week.

Q: How automatic is it really?
A: In Full Auto the machine manages extrusion, blowing, labelling and trimming continuously.

Q: Can a new operator run it?
A: Yes, Semi Auto is intended for training and medium runs.

Q: What if a fault occurs?
A: The built-in alarm system reports it, and stored recipes let you restart with confidence.

Standard export packaging with 25-35 working day delivery and CE plus ISO9001:2008 certification. Tell us your container and label spec and we will configure the automatic IML HDPE blow molding machine for your line.