Ningbo Qiming Machinery Manufacturing Co., Ltd.
| Payment Terms | T/T, L/C, Western Union |
| Screw Diameter | 80 mm |
| Supply Ability | 50 Sets per Month |
| Packaging Details | Fumigation-free export wooden case with moisture-proof film and reinforced steel frame |
| Max Product Volume | 100 L |
| Die Head Configuration | Single / Double / Four |
| Clamping Force | 180 kN |
| Screw L/D Ratio | 25:1 |
| Delivery Time | 30-45 working days after deposit |
| Extrusion Capacity | 120-150 kg/h (HDPE) |
| Control System | PLC with Color Touch Screen |
| Mould Platen Size | 800 x 600 mm |
| Model Number | MP100FD |
| Place of Origin | Zhejiang, China |
| Brand Name | ECER |
| Certification | ISO 9001:2015, CE |
View Detail Information
Explore similar products
Multi Cavity Fully Automatic PETG MP55D-2 Extrusion Blow Molding Machine For
ChinaMeper Fully Automatic Extrusion Blow Molding Machine MP70FD For Material
China Meper Shampoo Plastic Bottle Extrusion Blow Molding Machine Stable PLC
China Meper 1 Gallon Pesticide Bottles Blow Moulding Machine
Product Specification
| Payment Terms | T/T, L/C, Western Union | Screw Diameter | 80 mm |
| Supply Ability | 50 Sets per Month | Packaging Details | Fumigation-free export wooden case with moisture-proof film and reinforced steel frame |
| Max Product Volume | 100 L | Die Head Configuration | Single / Double / Four |
| Clamping Force | 180 kN | Screw L/D Ratio | 25:1 |
| Delivery Time | 30-45 working days after deposit | Extrusion Capacity | 120-150 kg/h (HDPE) |
| Control System | PLC with Color Touch Screen | Mould Platen Size | 800 x 600 mm |
| Model Number | MP100FD | Place of Origin | Zhejiang, China |
| Brand Name | ECER | Certification | ISO 9001:2015, CE |
| High Light | Four Die Head Blow Molding Equipment ，20L HDPE Jerry Can Blow Molding Machine ，Extrusion Blow Molding Machine for HDPE | ||
A large machine that runs one part per cycle is an expensive way to make jerry cans. The MP100FD accepts single, double and four die head configurations on the same extruder, so a plant can start with one head, add a second when volume grows, and move to four when the order book justifies it.
Head changes are a tooling exercise, not a rebuild. The die head mounts on the same accumulator body, and the PLC stores a recipe for each configuration, so cycle timing and clamping force follow the head count rather than being re-entered by hand.
Key Features| Parameter | MP100FD Specification |
|---|---|
| Screw diameter | 80 mm |
| Screw L/D ratio | 25:1 |
| HDPE extrusion capacity | 120 - 150 kg/h |
| Max product volume | 100 L |
| Clamping force | 180 kN |
| Die head configuration | Single / Double / Four |
| Mould platen size (W x H) | 800 x 600 mm |
| Mould thickness range | 150 - 350 mm |
| Mould opening stroke | 400 - 800 mm |
| Heating zones | 4 - 6 |
| Installed power | Approx. 55 kW |
| Oil tank capacity | 350 L |
| Machine weight | Approx. 8,000 kg |
| Machine dimensions (L x W x H) | 4,500 x 2,200 x 3,500 mm |
| Power supply | 380V / 50Hz / 3-phase |
A: Roughly the head count, provided cooling and cooling water capacity keep up. On a 20L jerry can, four heads typically give three to four times the single head rate; we quote the cycle and hourly figure for your exact part before order.
Q: Do all four cavities produce the same weight?A: We balance the flow channels at build and verify each cavity weight during the trial, with the variation sheet supplied in the documents. On a 20L can, cavity to cavity variation normally stays within a couple of percent.
Q: Can I add heads later?A: Yes. The accumulator body accepts the additional heads and the PLC software is already licensed for four. Most buyers order the machine four head ready and buy the extra heads when volume arrives.
Packaging, Delivery and Quality AssuranceDie heads are crated separately with flow plates wrapped and numbered, and the machine travels in a fumigation-free export wooden case with steel reinforcement and VCI anti-rust film. Delivery is 30 to 45 working days after deposit. ISO 9001:2015 certification, CE marking, a 12 month warranty and remote commissioning support are included.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin... Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin...
Get in touch with us
Leave a Message, we will call you back quickly!