| Station | Double |
| Applicable Materials | PE, PP, PVC, PA |
| Payment Terms | L/C, T/T |
| Max Product Volume | 10 L |
| Packaging Details | Standard export wooden case with moisture-proof film and steel reinforcement |
| Clamping Force | 150 kN |
| Screw Diameter | 80 mm (L/D 24) |
| Supply Ability | 100 Sets per Month |
| Number of Die Heads | 1, 2, 3, 4 |
| HDPE Plasticizing Capacity | 90 kg/h |
| Delivery Time | 25-35 Work Days |
| Control System | PLC with Touch Screen |
| Brand Name | MEPER |
| Model Number | MP80D / 80FD |
| Certification | CE / ISO9001:2008 |
| Place of Origin | Zhejiang, China |
View Detail Information
Explore similar products
2 Head Extrusion Blow Molding Machine For PE / PP
Customizable Plastic PVC Extrusion Molding Machine
PE PP PVC PA Extrusion Blow Machine 1 Head 3 head
HDPE PE PP PVC PA Automatic Extrusion Blow Molding Machine 90 Plasticizing
Product Specification
| Station | Double | Applicable Materials | PE, PP, PVC, PA |
| Payment Terms | L/C, T/T | Max Product Volume | 10 L |
| Packaging Details | Standard export wooden case with moisture-proof film and steel reinforcement | Clamping Force | 150 kN |
| Screw Diameter | 80 mm (L/D 24) | Supply Ability | 100 Sets per Month |
| Number of Die Heads | 1, 2, 3, 4 | HDPE Plasticizing Capacity | 90 kg/h |
| Delivery Time | 25-35 Work Days | Control System | PLC with Touch Screen |
| Brand Name | MEPER | Model Number | MP80D / 80FD |
| Certification | CE / ISO9001:2008 | Place of Origin | Zhejiang, China |
| High Light | Double Station Extrusion Blow Moulder ,80 kW Extrusion Molding Machine ,10L Detergent Bottle Blow Moulder | ||
Electrical capacity is a real constraint in established factories. A buyer with a 100 kVA transformer often cannot add a large machine without a substation upgrade, which is why the installed power figure deserves as much attention as clamping force when specifying a line.
The MP80D is installed at 80 kW total, split across 15.85 kW of screw heating, 10 kW of head heating, a 30 kW extrusion motor and an 18.7 kW oil pump. That balance is deliberately chosen so the machine produces at full rate without demanding a supply upgrade in most plants.
Key Features| Parameter | MP80D Specification |
|---|---|
| Applicable materials | PE, PP, PVC, PA |
| Max product volume | 10 L |
| Number of die heads | 1, 2, 3, 4 |
| Clamping force | 150 kN |
| Platen opening stroke | 220 - 620 mm |
| Max mould size (W x H) | 520 x 460 mm |
| Screw diameter | 80 mm |
| Screw L/D ratio | 24 |
| HDPE plasticizing capacity | 90 kg/h |
| Screw heating | 4 zones, 15.85 kW |
| Die head heating | 3 zones, 10 kW |
| Extrusion motor power | 30 kW |
| Oil pump motor power | 18.7 kW |
| Total installed power | 80 kW |
| Cooling water consumption | 40 L/min |
| Compressed air | 1.5 m3/min at 0.6-0.8 MPa |
| Machine weight | 8.2 t |
| Machine dimensions (L x W x H) | 4.0 x 2.3 x 2.5 m |
A: Yes, the standard build is 380V, 50Hz, three phase with 80 kW installed. We ask for your site voltage and frequency at order stage and configure the electrical build accordingly, including 415V or 60Hz where needed.
Q: Why does the heating total differ from the installed power?A: Heating elements cycle on and off once the barrel reaches temperature, so their average draw is far below the rated 25.85 kW. The 80 kW figure is the sum of connected loads, which is what cable and breaker sizing must be based on.
Q: Does low installed power mean lower output?A: No. Output is set by screw geometry and melt capacity, both of which reach 90 kg/h on HDPE. The electrical design simply avoids over-sizing motors and heating, which also reduces running cost.
Packaging, Delivery and Quality AssuranceThe machine ships with ports capped and cabinet sealed with desiccant inside an export wooden case with steel reinforcement and moisture barrier film. Delivery is 25 to 35 working days after deposit. CE certification, ISO9001:2008 records, English electrical drawings, a 12 month warranty and remote commissioning support are included.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Employee Number:
100~200
Ecer Certification:
Verified Supplier
Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin... Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin...
Get in touch with us
Leave a Message, we will call you back quickly!