| Die Head Configuration | Single / Double / Four |
| Delivery Time | 30-45 working days after deposit |
| Mould Platen Size | 800 x 600 mm |
| Packaging Details | Fumigation-free export wooden case with moisture-proof film and reinforced steel frame |
| Extrusion Capacity | 120-150 kg/h (HDPE) |
| Clamping Force | 180 kN |
| Screw L/D Ratio | 25:1 |
| Max Product Volume | 100 L |
| Payment Terms | T/T, L/C, Western Union |
| Screw Diameter | 80 mm |
| Control System | PLC with Color Touch Screen |
| Supply Ability | 50 Sets per Month |
| Model Number | MP100FD |
| Certification | ISO 9001:2015, CE |
| Place of Origin | Zhejiang, China |
| Brand Name | ECER |
View Detail Information
Explore similar products
Multi Cavity Fully Automatic PETG MP55D-2 Extrusion Blow Molding Machine For
ChinaMeper Fully Automatic Extrusion Blow Molding Machine MP70FD For Material
China Meper Shampoo Plastic Bottle Extrusion Blow Molding Machine Stable PLC
China Meper 1 Gallon Pesticide Bottles Blow Moulding Machine
Product Specification
| Die Head Configuration | Single / Double / Four | Delivery Time | 30-45 working days after deposit |
| Mould Platen Size | 800 x 600 mm | Packaging Details | Fumigation-free export wooden case with moisture-proof film and reinforced steel frame |
| Extrusion Capacity | 120-150 kg/h (HDPE) | Clamping Force | 180 kN |
| Screw L/D Ratio | 25:1 | Max Product Volume | 100 L |
| Payment Terms | T/T, L/C, Western Union | Screw Diameter | 80 mm |
| Control System | PLC with Color Touch Screen | Supply Ability | 50 Sets per Month |
| Model Number | MP100FD | Certification | ISO 9001:2015, CE |
| Place of Origin | Zhejiang, China | Brand Name | ECER |
| High Light | Servo hydraulic blow moulder ,HDPE drum blow molding machine ,120-150 kg/h extrusion blow moulder | ||
On a large blow molding machine the hydraulic pump runs all shift, whether or not the machine is clamping. A fixed displacement pump therefore burns power during cooling, during parison drop and during every idle minute of a 120 second cycle. The MP100FD uses a servo driven hydraulic pump that only delivers what the cycle asks for.
Measured across a full shift of 100 litre drum production, that control strategy cuts energy consumption by 25 to 30 percent against a conventional fixed pump of the same rating. On a machine installed at roughly 55 kW, the saving is not a rounding error in the electricity bill.
Key Features| Parameter | MP100FD Specification |
|---|---|
| Screw diameter | 80 mm |
| Screw L/D ratio | 25:1 |
| HDPE extrusion capacity | 120 - 150 kg/h |
| Max product volume | 100 L |
| Clamping force | 180 kN |
| Die head configuration | Single / Double / Four |
| Mould platen size (W x H) | 800 x 600 mm |
| Mould thickness range | 150 - 350 mm |
| Mould opening stroke | 400 - 800 mm |
| Heating zones | 4 - 6 |
| Installed power | Approx. 55 kW |
| Oil tank capacity | 350 L |
| Machine weight | Approx. 8,000 kg |
| Machine dimensions (L x W x H) | 4,500 x 2,200 x 3,500 mm |
| Power supply | 380V / 50Hz / 3-phase |
A: With a power analyser on the incoming supply, comparing the same 100L drum mould and material against a fixed pump machine of equal rating over a full shift. We can supply the method and a sample log so a buyer's own engineer can repeat the test after installation.
Q: Does the servo pump reduce cycle speed?A: No. Clamp, carriage and blow sequences reach the same speeds because the servo motor responds faster than a fixed pump with proportional valves. Cycle time is unchanged or slightly better.
Q: What maintenance does the servo system need?A: The same oil and filter regime as a conventional hydraulic machine, plus a periodic check of drive cooling. Servo pumps have fewer moving parts than variable displacement piston pumps, so overhaul intervals are usually longer.
Packaging, Delivery and Quality AssuranceThe machine is shipped with hydraulic oil drained, ports capped and the cabinet sealed with desiccant inside a fumigation-free export wooden case. Delivery is 30 to 45 working days after deposit. ISO 9001:2015 and CE certification, a 48 hour dry run report, 12 month warranty and remote technical support come with every unit.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Employee Number:
100~200
Ecer Certification:
Verified Supplier
Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin... Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin...
Get in touch with us
Leave a Message, we will call you back quickly!