| Container Capacity | 1L |
| Payment Terms | T/T, L/C |
| Delivery Time | 25-35 Work Days |
| Stations | Double |
| Screw Diameter | 70mm (24 L/D) |
| Packaging Details | Wooden pallet (standard), plywood case (optional) |
| Supply Ability | 30 Sets per Month |
| Die Heads | Two |
| Clamping Force | 90kN |
| Applicable Material | HDPE, PP, PVC, PA |
| Brand Name | MEPER |
| Certification | CE / ISO9001:2008 |
| Place of Origin | NINGBO, CHINA |
| Model Number | MP70D-2 |
View Detail Information
Explore similar products
MP55D-3T 10ml-1L Blow Molding Equipment , Plastic Blow Moulding Machine For
10ml-1L High Speed Plastic Bottle Blow Molding Machine With Proportional
10ml-1L MP55D-1 Plastic Bottle Blow Molding Machine Hydraulic Driven MEPER
Plastic Tyre Blow Molding Machinery , Automatic Blow Moulding Machine MP70D-1
Product Specification
| Container Capacity | 1L | Payment Terms | T/T, L/C |
| Delivery Time | 25-35 Work Days | Stations | Double |
| Screw Diameter | 70mm (24 L/D) | Packaging Details | Wooden pallet (standard), plywood case (optional) |
| Supply Ability | 30 Sets per Month | Die Heads | Two |
| Clamping Force | 90kN | Applicable Material | HDPE, PP, PVC, PA |
| Brand Name | MEPER | Certification | CE / ISO9001:2008 |
| Place of Origin | NINGBO, CHINA | Model Number | MP70D-2 |
| High Light | Double Die Head Blow Molding Equipment ,1L HDPE Container Blow Molding Machine ,Plastic Bottle Blow Molding Machine | ||
Output per hour is usually the number a buyer checks first, and it is decided less by screw size than by how many parisons leave the die head in one shot. The MP70D-2 carries two die heads on a double station frame, so each cycle produces two containers with a single machine operator.
Doubling cavities only works if both parisons are identical. Each die head on this machine is self-manufactured by MEPER and adjusted independently, so wall thickness in cavity one matches cavity two. Buyers who have fought weight variation between cavities on a cheap twin head will recognise why that matters for resin cost.
Key Features| Parameter | MP70D-2 Specification |
|---|---|
| Material | PE, PP, PVC, PA |
| Max container capacity | 1 L |
| Number of die heads | 2 |
| Clamping force | 90 kN |
| Platen opening stroke | 180-480 mm |
| Max mould size (W x H) | 430 x 350 mm |
| Screw diameter | 70 mm |
| Screw L/D ratio | 24 L/D |
| HDPE plasticizing capacity | 70 kg/h |
| Extrusion motor power | 18.5 kW |
| Total installed power | 49.14 kW |
| Average energy consumption | 28 kW |
| Air pressure | 0.6-0.8 MPa |
| Machine dimension (L x W x H) | 3.6 x 2.2 x 2.36 m |
| Total weight | 5.5 t |
A: On a properly set machine, container weight between cavity one and cavity two typically stays within plus or minus 1.5 grams for a 1L HDPE bottle. We record weights for both cavities during the factory trial and include the sheet in the shipment documents.
Q: Can I run a single cavity mould on a double die head machine?A: Yes. One head can be shut off with a blanking plug while the other runs, which is common for trial moulds or low volume parts. This keeps the machine productive before the second mould is ready.
Q: How much air and cooling water does the double head draw?A: Compressed air consumption is 0.8 to 1 cubic metre per minute at 0.6 to 0.8 MPa, and cooling water is around 40 litres per minute. Both figures assume two active heads; a single head run uses roughly half the air.
Packaging, Delivery and Quality AssuranceThe machine leaves the factory with heads blanked, platens blocked and rust preventive applied, mounted on a wooden pallet inside a plywood case. Delivery is 25 to 35 working days after deposit. Each unit is CE marked, produced under ISO9001:2008 control, and supported by a 12 month warranty plus English documentation and remote commissioning.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Employee Number:
100~200
Ecer Certification:
Verified Supplier
Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin... Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin...
Get in touch with us
Leave a Message, we will call you back quickly!