Ningbo Qiming Machinery Manufacturing Co., Ltd.
| Packaging Details | Standard export wooden case with moisture-proof film and steel reinforcement |
| Max Product Volume | 10 L |
| Delivery Time | 25-35 Work Days |
| HDPE Plasticizing Capacity | 90 kg/h |
| Screw Diameter | 80 mm (L/D 24) |
| Station | Double |
| Payment Terms | L/C, T/T |
| Supply Ability | 100 Sets per Month |
| Applicable Materials | PE, PP, PVC, PA |
| Number of Die Heads | 1, 2, 3, 4 |
| Clamping Force | 150 kN |
| Control System | PLC with Touch Screen |
| Certification | CE / ISO9001:2008 |
| Place of Origin | Zhejiang, China |
| Model Number | MP80D / 80FD |
| Brand Name | MEPER |
View Detail Information
Explore similar products
2 Head Extrusion Blow Molding Machine For PE / PP
Customizable Plastic PVC Extrusion Molding Machine
PE PP PVC PA Extrusion Blow Machine 1 Head 3 head
HDPE PE PP PVC PA Automatic Extrusion Blow Molding Machine 90 Plasticizing
Product Specification
| Packaging Details | Standard export wooden case with moisture-proof film and steel reinforcement | Max Product Volume | 10 L |
| Delivery Time | 25-35 Work Days | HDPE Plasticizing Capacity | 90 kg/h |
| Screw Diameter | 80 mm (L/D 24) | Station | Double |
| Payment Terms | L/C, T/T | Supply Ability | 100 Sets per Month |
| Applicable Materials | PE, PP, PVC, PA | Number of Die Heads | 1, 2, 3, 4 |
| Clamping Force | 150 kN | Control System | PLC with Touch Screen |
| Certification | CE / ISO9001:2008 | Place of Origin | Zhejiang, China |
| Model Number | MP80D / 80FD | Brand Name | MEPER |
| High Light | 10L double station blow molding machine ，150kN clamp extrusion molding machine ，double station extrusion blow molding | ||
Ten litres is the awkward size in blow molding. It is too large for a small single station machine to run economically and too small to justify a 100 litre drum frame. The MP80D sits exactly in that gap with a double station layout, a 150 kN clamp and a platen sized for 520 x 460 mm moulds.
Two stations working in parallel cut the idle share of every cycle. While one station cools an HDPE jerry can, the other is already accepting a fresh parison, which is why a double station 10 litre machine typically runs at close to twice the output of a single station frame drawing the same power.
Key Features| Parameter | MP80D Specification |
|---|---|
| Applicable materials | PE, PP, PVC, PA |
| Max product volume | 10 L |
| Number of die heads | 1, 2, 3, 4 |
| Clamping force | 150 kN |
| Platen opening stroke | 220 - 620 mm |
| Max mould size (W x H) | 520 x 460 mm |
| Screw diameter | 80 mm |
| Screw L/D ratio | 24 |
| HDPE plasticizing capacity | 90 kg/h |
| Screw heating | 4 zones, 15.85 kW |
| Die head heating | 3 zones, 10 kW |
| Extrusion motor power | 30 kW |
| Oil pump motor power | 18.7 kW |
| Total installed power | 80 kW |
| Cooling water consumption | 40 L/min |
| Compressed air | 1.5 m3/min at 0.6-0.8 MPa |
| Machine weight | 8.2 t |
| Machine dimensions (L x W x H) | 4.0 x 2.3 x 2.5 m |
A: Because 10 litre parts are cooling dominated. A double station machine overlaps cooling with the next shot, so the same installed power and floor space produce roughly twice the parts. A larger single station frame mainly buys clamp force you do not need at this part size.
Q: What hourly output can I expect on a 10L container?A: On a 10 litre HDPE can at typical wall thickness, a double station machine usually runs 120 to 180 pieces per hour depending on cooling water temperature. We confirm the figure with your mould during the factory trial and put it in writing.
Q: Is the 150 kN clamp really sufficient for 10 litres?A: It is, because clamp requirement tracks the parting line area, not the volume. A 10 litre container on a 520 x 460 mm platen is well inside the rating; we verify the projected area from your drawing before order so there is no surprise at commissioning.
Packaging, Delivery and Quality AssuranceThe machine ships in an export wooden case with steel reinforcement, moisture barrier film and anti-rust protection on machined surfaces. Delivery is 25 to 35 working days after deposit. Each unit is CE marked and built under ISO9001:2008 control, supplied with English manuals, a spare parts list and remote commissioning support.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Employee Number:
100~200
Ecer Certification：
Verified Supplier
Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin... Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin...
Get in touch with us
Leave a Message, we will call you back quickly!