| HDPE Plasticizing Capacity | 90 kg/h |
| Payment Terms | L/C, T/T |
| Station | Double |
| Packaging Details | Standard export wooden case with moisture-proof film and steel reinforcement |
| Control System | PLC with Touch Screen |
| Clamping Force | 150 kN |
| Max Product Volume | 10 L |
| Applicable Materials | PE, PP, PVC, PA |
| Delivery Time | 25-35 Work Days |
| Screw Diameter | 80 mm (L/D 24) |
| Supply Ability | 100 Sets per Month |
| Number of Die Heads | 1, 2, 3, 4 |
| Brand Name | MEPER |
| Certification | CE / ISO9001:2008 |
| Model Number | MP80D / 80FD |
| Place of Origin | Zhejiang, China |
View Detail Information
Explore similar products
2 Head Extrusion Blow Molding Machine For PE / PP
Customizable Plastic PVC Extrusion Molding Machine
PE PP PVC PA Extrusion Blow Machine 1 Head 3 head
HDPE PE PP PVC PA Automatic Extrusion Blow Molding Machine 90 Plasticizing
Product Specification
| HDPE Plasticizing Capacity | 90 kg/h | Payment Terms | L/C, T/T |
| Station | Double | Packaging Details | Standard export wooden case with moisture-proof film and steel reinforcement |
| Control System | PLC with Touch Screen | Clamping Force | 150 kN |
| Max Product Volume | 10 L | Applicable Materials | PE, PP, PVC, PA |
| Delivery Time | 25-35 Work Days | Screw Diameter | 80 mm (L/D 24) |
| Supply Ability | 100 Sets per Month | Number of Die Heads | 1, 2, 3, 4 |
| Brand Name | MEPER | Certification | CE / ISO9001:2008 |
| Model Number | MP80D / 80FD | Place of Origin | Zhejiang, China |
| High Light | 80mm screw blow moulding machine ,10L PP PVC bottle moulding machine ,extrusion molding machine for containers | ||
Material range decides how much of an order book a machine can serve. The MP80D runs PE, PP, PVC and PA through the same 80 mm, 24 L/D screw, so a plant is not locked out of a PP shampoo bottle order or a PVC industrial container simply because the machine was bought for HDPE.
Each material needs its own barrel profile rather than a compromise setting. Four screw heating zones and three die head zones give the operator enough control to run a PP melt at its own temperature window and then switch to PVC without fighting the machine, and the settings are stored for the next run.
Key Features| Parameter | MP80D Specification |
|---|---|
| Applicable materials | PE, PP, PVC, PA |
| Max product volume | 10 L |
| Number of die heads | 1, 2, 3, 4 |
| Clamping force | 150 kN |
| Platen opening stroke | 220 - 620 mm |
| Max mould size (W x H) | 520 x 460 mm |
| Screw diameter | 80 mm |
| Screw L/D ratio | 24 |
| HDPE plasticizing capacity | 90 kg/h |
| Screw heating | 4 zones, 15.85 kW |
| Die head heating | 3 zones, 10 kW |
| Extrusion motor power | 30 kW |
| Oil pump motor power | 18.7 kW |
| Total installed power | 80 kW |
| Cooling water consumption | 40 L/min |
| Compressed air | 1.5 m3/min at 0.6-0.8 MPa |
| Machine weight | 8.2 t |
| Machine dimensions (L x W x H) | 4.0 x 2.3 x 2.5 m |
A: It can run both, but PVC releases hydrogen chloride during processing and attacks standard barrel steel over time. If PVC is a regular product we specify a nitrided or bimetallic barrel and screw from the start, which then handles PE and PP without loss of output.
Q: What changes when switching from HDPE to PP?A: Barrel and head temperatures drop, screw speed and blow pressure are adjusted, and cooling time rises because PP is more crystalline. All of it is stored in a recipe, so the changeover is a recall plus a first article check rather than an experiment.
Q: How stable is output at 90 kg/h?A: The figure is HDPE plasticizing capacity measured at continuous running condition. On a 10 litre container this keeps both stations fed at full cycle speed; on smaller bottles the machine runs below capacity, which is where the double station layout helps utilisation.
Packaging, Delivery and Quality AssuranceBarrel and screw are protected with anti-rust compound, the machine secured in an export wooden case with steel reinforcement and moisture barrier film. Delivery is 25 to 35 working days after deposit. CE certification, ISO9001:2008 production control, English documentation and a 12 month warranty are standard, with remote commissioning included.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Employee Number:
100~200
Ecer Certification:
Verified Supplier
Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin... Established in 1998, Ningbo Qiming Machinery Manufacturing Co., Ltd. and Ningbo Mingzhen Precision Machinery Manufacturing Co., Ltd. are subsidiary companies of Ningbo Liming Investment Corporation. We specialize in making injection and extrusion blow molding machines. Ningbo Qimin...
Get in touch with us
Leave a Message, we will call you back quickly!