PET Acoustic Ceiling Tiles Drop In Grid Replacement For Suspended Ceilings

PET acoustic ceiling tiles offer a direct-fit replacement for standard suspended ceiling grids, instantly transforming reverberant commercial spaces into acoustically comfortable environments. Each tile is manufactured from 100% recycled polyester fiber using a thermal bonding process free of formaldehyde and chemical adhesives. The tiles drop directly into existing standard T-bar grid systems with no modification required. Noise Reduction Coefficient values reach up to 0.90, dramatically reducing echo and improving speech privacy in offices, retail stores, educational facilities, and healthcare environments. The tiles are significantly lighter than traditional mineral fiber alternatives, making handling and installation faster and safer. The felt surface resists sagging, will not absorb moisture, and does not generate dust or fibers. The tiles meet Class B1 fire safety standards and carry OEKO-TEX STANDARD 100 certification. For commercial interiors looking to upgrade acoustic performance without a full ceiling renovation, PET ceiling tiles provide the simplest path to a quieter space.

Many existing commercial buildings have suspended ceilings fitted with hard, reflective mineral fiber or metal tiles that offer minimal acoustic absorption. Replacing the entire ceiling system is costly and disruptive. PET acoustic ceiling tiles offer a retrofit solution. Individual tiles or whole sections can be replaced with absorptive PET tiles while leaving the existing grid structure intact. The acoustic improvement is immediate and noticeable. Speech intelligibility improves, background noise levels drop, and the overall sense of acoustic comfort increases. The lightweight tiles also reduce the dead load on the suspension system compared to some traditional ceiling materials. Because the tiles are moisture-resistant, they will not sag or stain in humid conditions, making them suitable for coastal locations and spaces with variable humidity.

Office suspended ceilings, call center ceiling grids, retail store overhead treatment, educational classroom ceilings, healthcare facility corridors, airport and transit hub ceiling systems, and any commercial space with an existing T-bar grid requiring acoustic improvement.

The PET ceiling tile absorbs sound waves that travel upward from voices, equipment, and ambient sources. The ceiling is typically the largest uninterrupted reflective surface in a room, making it a primary contributor to reverberation. By replacing reflective tiles with absorptive PET tiles, the total sound energy bouncing around the room is significantly reduced. The porous fiber structure converts acoustic energy into negligible heat through frictional damping. Because tiles can be selectively replaced, acoustic treatment can be concentrated where it is most needed.

Measure your existing ceiling grid to confirm tile dimensions. Standard grids use either 600*600mm or 600*1200mm modules. Determine the percentage of tiles you wish to replace. For moderate improvement, replacing 30 to 50 percent of tiles in a checkerboard pattern is effective. For maximum absorption, replace all tiles. For spaces with high noise levels, select thicker tiles for higher NRC. The tiles can be easily cut on site to accommodate lighting fixtures, air diffusers, and sprinkler heads.

They are designed to fit standard 600*600mm and 600*1200mm T-bar grid systems. If your grid uses imperial measurements, please contact us to confirm compatibility before ordering.

No, PET is inherently moisture-resistant and dimensionally stable. The tiles will not sag, warp, or absorb moisture even in high-humidity conditions, maintaining a flat, professional appearance throughout their service life.

Yes, a checkerboard or patterned replacement is a common and effective approach. The absorptive PET tiles will reduce overall reverberation even if some original tiles remain in place. For best results, distribute the PET tiles evenly across the ceiling area.

3D Cubic Acoustic Panel is a pre-finished acoustic wall tile designed to create a contemporary interior and open the realms of design flexibility in any interior environment. It is a lightweight semi-ridged the product that will create a contemporary and decorative interior whilst helping to reduce reverberation sound and assist in controlling back ground noise.

• 3D Acoustic Wall Panels
• Nature Moss
• Sound Panels for Walls
• Green Plant Decorative
• Sound Reduction Panels
• Nature Plant Decorative Wall

• Our PET Felt Acoustic Panels are made from 100% polyester fiber, does not contain any chemical binders including formaldehyde.
• The whole production process is completely physical through high temperature and high pressure by needle punching processing.
• Our PET Felt Acoustic Panels are touchable and Echo - friendly.
• The weight is light and surface is semi-rigid.
• Easy to install, easy to cut, easy to dust.
• Our polyester fibre panel is flame retardant, heat insulation, thermal insulation, moistureproof, prevent mildew,

1. Sheet Packing, Plastic bag inside, Carton outside;
2. Carton's Size: 123cm * 245cm * 11cm;
3. Carton's Weight: 56.5kg per Carton

1. We only use high quality raw fiber material;
2. Considering of using sustainable material, we use 50% to 60% of prevous post-consume recycled PET bottle-flake;
3. It's a totally healthy material that's touchable and recyclable;

We can provide all the services you need to export from China. Such as sourcing, guiding, translating, buying, quality inspect, documents prepare, declaring shipping etc service.

We would like to build up friendship, trust and long term cooperation with our clients! We aim to be our clients' reliable partner in China!

• Wholesale--lowest price
• With fashion design and good quality
• Strict quality control during every production product
• We have our own factory so we can provide you the best price
• Customer design welcome, OEM and ODM orders welcome
• We can make samples as your requests. Or you can send us your design; we will make samples for you.