Hebei Luojie Metal Products Co., Ltd.
| Payment Terms | L/C,T/T |
| Supply Ability | 5000Pcs Per Month |
| Delivery Time | 5-10days |
| Packaging Details | 1.normally packed in pilling up ways with two pieces of square wood on both upperand bottom sides. 2.acccording to customer's requirements. |
| Material | Carbon Steel (A36), Stainless Steel 304/316, Hot-Dip Galvanized |
| Fabrication Type | Welded / Swage-Locked / Press-Locked |
| Bearing Bar Section | 25×3 mm, 30×5 mm, 40×6 mm |
| Cross Bar | Twist-Locked Rod, Flat Rod, W-Flat |
| Bar Spacing | 20 mm, 30 mm, 40 mm, Custom |
| Surface | Hot-Dip Galvanized, Powder Coating, Plain Bare |
| Anti-Slip Option | Serrated Top, Grip-Pattern, Smooth |
| Panel Size & Edge | Standard 1000×2000 mm, Cut-to-Size, Welded Frame or Flush Edge |
| Brand Name | Luo Jie |
| Model Number | LJ-08 |
| Certification | ISO9001 |
| Place of Origin | Hebei Province,China |
View Detail Information
Explore similar products
High Load Welded Steel Grating G325/30/100 Anti Slip For Industrial Platforms
High Strength Anti Slip Steel Grating For Industrial Platforms Drainage
High Strength Non Slip Steel Grating For Industrial And Municipal Applications
Hot Dip Galvanized Steel Grating Catwalk Grating For Chemical Plant G40/5
Product Specification
| Payment Terms | L/C,T/T | Supply Ability | 5000Pcs Per Month |
| Delivery Time | 5-10days | Packaging Details | 1.normally packed in pilling up ways with two pieces of square wood on both upperand bottom sides. 2.acccording to customer's requirements. |
| Material | Carbon Steel (A36), Stainless Steel 304/316, Hot-Dip Galvanized | Fabrication Type | Welded / Swage-Locked / Press-Locked |
| Bearing Bar Section | 25×3 mm, 30×5 mm, 40×6 mm | Cross Bar | Twist-Locked Rod, Flat Rod, W-Flat |
| Bar Spacing | 20 mm, 30 mm, 40 mm, Custom | Surface | Hot-Dip Galvanized, Powder Coating, Plain Bare |
| Anti-Slip Option | Serrated Top, Grip-Pattern, Smooth | Panel Size & Edge | Standard 1000×2000 mm, Cut-to-Size, Welded Frame or Flush Edge |
| Brand Name | Luo Jie | Model Number | LJ-08 |
| Certification | ISO9001 | Place of Origin | Hebei Province,China |
Steel Grating Systems For Rapid Installation, Maintenance and Long-Life Service
Product Overview:
Our Multi-Profile Steel Grating Kits are engineered for projects that require rapid selection between safety, drainage and load-bearing performance. Each kit contains representative panels—fine mesh safety step, standard welded grating, press-locked drainage grates and serrated heavy-duty panels—so project engineers can trial fit, compare anti-slip behavior and confirm drainage/open area on site before full procurement.
Manufactured to precise dimensional tolerances, panels are available with a choice of bearing bar sections and cross-bar retention methods. Serrated top profiles increase skid resistance in oily or wet environments; smooth profiles provide lower noise and easier cleaning for indoor mezzanines. Hot-dip galvanizing or factory powder coat finishes are applied to extend life in outdoor or corrosive environments.
Manufacturing Variants & Why Choose Each
Welded Grating: highest static stiffness — use where fixed heavy loads occur (platforms, machine bases).
Swage-Locked / Press-Locked: economical, good for large area decking with lower localized loads; panels can be field-assembled.
Serrated Top Bars: mandatory for slip-critical zones (stair treads, ramps).
Twist-Locked Cross Rods: increased shear retention for dynamic loads near moving equipment.
Installation, Handling & Maintenance
Pre-fit panels on templates to check tolerances; store off-ground to avoid corrosion.
Use specified clip & bolt systems; torque values supplied with packing list.
For access panels specify quick-release clips or hinged assemblies.
Regular maintenance: sweep & jet wash, inspect welds & coating annually; touch-up coatings on cut edges post-installation.
Specification:
| Item | Typical Range | Notes |
|---|---|---|
| Bearing Bar Section | 25×3, 30×5, 40×6 mm (custom) | Wider section → higher span/load. |
| Cross Bar Type | Twist rod Ø6–8 mm, Flat bar 5–8 mm | Welded or press-locked options. |
| Bar Spacing | 20 / 30 / 40 mm typical | Affects open area & load distribution. |
| Panel Size | Std 1000×2000 mm; cut-to-size | Panels can be supplied with welded frames. |
| Surface Finish | HDG / Powder coat / Bare | HDG recommended for outdoor/marine. |
| Anti-Slip | Serrated, Grip-pattern (to meet R13 / PTV reqs) | Specify testing standard if critical. |
| Representative UDL | 4–20 kN/m² (by section) | Final spec requires structural calcs. |
| Typical Weight | 8–30 kg/m² (varies by section) | Used for handling & span design. |
Quality Assurance, Packaging & Samples
Each production lot includes material certificates, dimensional inspection report and a sample panel upon request. Panels are palletized with edge protection and shrink-wrapped or crated for export; special sea-fast packing available for offshore projects. Third-party load testing and salt-spray reports can be provided for project bids.
Company Details
Business Type:
Manufacturer,Trading Company,Seller,Exporter
Year Established:
2002
Total Annual:
10000000-5000000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Hebei Luo Jie Metal Products Co., Ltd. was established in 2002, with its factory located in Anping County, Hebei Province, the largest wire mesh industry area in Asia. The company initially produced welded fence panels, and after more than five years of development, has grown into a comprehensive en... Hebei Luo Jie Metal Products Co., Ltd. was established in 2002, with its factory located in Anping County, Hebei Province, the largest wire mesh industry area in Asia. The company initially produced welded fence panels, and after more than five years of development, has grown into a comprehensive en...
Get in touch with us
Leave a Message, we will call you back quickly!