2.54mm Pitch Double-Row Female Header Connector 2x2-15 Pin PBT Material AWG#24-

Product Specification

2.54mm Pitch Double-Row Female Header Connector 2x2-15 Pin PBT Material AWG#24-#28

Highlight

• Industry‑standard 2.54 mm double‑row footprint, pin count configurable 2x2‑2x15 for flexible PCB layout
• PBT UL94V‑0 high‑temperature housing, compatible with AWG#24‑#28 wire harness assembly
• Stable contact performance, low contact resistance, suitable for both signal and low‑power transmission
• Full RoHS & REACH compliance; support tin/gold plating options for diverse environmental requirements
• Quick lead‑time for standard parts; volume‑order customization available for pin‑length, plating and packaging

Product Description

General Mechanical Parameters

Material & Electrical Characteristics

Environment & Soldering Guide

Product Feature

1. Standard 2.54 mm (0.100") pitch double‑row layout, fully interoperable with mainstream 2.54 mm male header series
2. PBT UL94V‑0 thermoplastic housing, excellent heat resistance during soldering process
3. Contact terminals support tin‑nickel or gold‑over‑nickel plating, anti‑oxidation for long‑term service
4. Wire compatibility: AWG#24‑#28, covers most common signal & low‑power harness scenarios
5. Multiple pin‑count options: 2x2 / 2x3 … up to 2x15 pins to match different channel‑quantity requirements
6. RoHS‑compliant raw materials, meets global electronics environmental regulations
7. Supports bulk, tube or tape‑and‑reel packaging to fit manual / auto‑SMT assembly lines

Product Advantage

1. Wide compatibility: Standard 2.54 mm dimension, interchangeable with mainstream industry header products, reduces secondary PCB redesign risk
2. Cost‑performance balance: PBT insulator lowers component cost while keeping flame‑retardant & thermal‑stable performance; select plating grade per application to control BOM cost
3. Flexible configuration: Continuously adjustable pin‑count from 2x2‑2x15, avoids over‑spec purchasing for your project
4. Assembly‑friendly: Matches AWG#24‑#28 common wire size; multiple packaging modes support both small‑batch prototype and large‑volume automated production
5. Stable field performance: Phosphor‑bronze contacts maintain good spring force under vibration and temperature fluctuation, lowering intermittent‑connection failure rate

Application 

• Industrial control & PLC peripheral modules
• Embedded systems, single‑board computers, development boards
• IoT sensor gateway, smart home control units
• Test & measurement equipment, debug interface connectors
• Consumer electronics, power supply auxiliary boards
• Automotive interior non‑safety electronic modules
• Medical non‑critical electronic devices

Customization Options

1. Pitch & mating check: Confirm mating male header is strictly 2.54 mm pitch double‑row; mismatched pitch will cause poor mating or pin damage
2. Pin‑count selection: Select exact 2xN pin number according to signal/power channel quantity; avoid redundant pins to save PCB space
3. Plating decision:
   • Tin‑nickel: For indoor, low‑humidity, non‑corrosive environment, cost‑effective for general‑signal circuits
   • Gold plating: For high‑humidity, vibration‑prone, long‑lifespan outdoor equipment, prevents contact oxidation
4. Wire gauge: Only use AWG#24‑#28 wires; thicker wires will cause crimp terminal deformation
5. Packaging selection: Tube / bulk for manual assembly; tape‑and‑reel for pick‑and‑place mass production
6. Thermal notice: Follow recommended soldering temperature & time; over‑temperature will deform PBT housing and lead to pin‑offset

Step Custom Process

1. Requirement Collection → 2. Technical Evaluation & Quotation → 3. 3D Drawing Review & Confirmation → 4. Mold / Tooling & Prototype → 5. Sample Test (contact R, retention, reflow) & Approval → 6. Mass Production → 7. Final QC & Shipment.

Our service

Sample Availability & Policy

Samples are to be sent to our customers for free on their request, so long as they are willing to pay for the freight, or we can pay the freight for some old customers from our side as well, or the customer can pay the freight in advance, and we can ship samples with our courier as well.

Guarantees/Warranties/Terms and Conditions

We provide a product quality guarantee.
A 15-day quick delivery is assured.
Payment terms include T/T, but it is subject to negotiation, such as L/C, PayPal, Western Union, and more.

After Sales Service

Excellent service is offered through our network of offices and head office.
Please contact our marketing sales department either by phone or e-mail, or if convenient, visit our office.
Aside from the friendly service, we offer the most competitive prices and flexible scheduling.

FAQ

Q: What's your MOQ?

A: Our MOQ usually comes to 1000 pcs, but we accept small order quantities for testing.

Q: Can I visit your factory?

A: Welcome to visit our factory, and we will show you our professional production process, and hoping we can have long-term cooperation with you.

Q: What's your sample time? What's your delivery time?

A: 7 days for samples, and 15-20 days for mass production. It depends on the quantity.

Q: How do I inspect my goods? 

A: You can inspect by visiting the factory, or ask a third party to inspect, or by picture inspection.

Q: How much does it cost to ship to my country?

A: The freight will be given by the freight company based on your Gross Weight and CBM.

Q: How do I know if you ship out my order?

A: The tracking number(DHL, UPS, FedEx, TNT, EMS, etc.), Air Waybill, or B/L by Sea will be sent to you as soon as your goods are shipped out. We also follow up on the delivery and keep you informed. The helpful after-service is provided. We support what you sell.

Q: Can I make personalized/customized products?

 A: Sure, just send us your drawing or sample.