PCT Rapid Test Kit IFA Colloidal Gold IVD Diagnostic WWHS FIA POCT

Product Specification

[Product Name]

Procalcitonin (PCT) Rapid Quantitative Test (Fluorescence immunoassay)

[Packing Specification]

25 Tests/kit

[Main Ingredients]

Ingredients of kits of different batch numbers cannot be exchanged.

[
Storage Conditions and Validity]

The product should be stored at 4℃-30℃ in a dry and dark place, sealed using aluminum foil bag and must not be frozen. The storage life is 12 months. The test card should be unpacked at room temprature (15℃-30℃) and should be used in 15min after unpacked at a temperature of (15-30)℃ and relative humidity of 20%-90%.

See outer packing for production date, batch number and expiry date.

[

[Test Method]

1. Please thoroughly read the specification before test. Frozen test card and sample should be placed at room temperature (15-30)℃ for at least 30min before use.
2. Start NIR-1000 dry fluoroimmunoassay analyser and verify quality control according to the specification. (Note: Reagent has been calibrated in advance and calibration curve parameters of each batch of reagents have been stored in the information card. Insert the information card before use and carry out test without re-calibration after passing quality inspection; otherwise, identify the cause before test.)
3. Take out the test card from the aluminum foil bag and use it within 15min
4. Place the test card on a clean horizontal table top and label it.
5. Take 100μL of sample and add it into 300μL of buffer solution (1:3). Then, mix the solution evenly, take 100μL of the solution and add it into the test card well.
6. Insert the test card into NIR-1000 dry fluoroimmunoassay analyser and press “Timing test” to keep time for 10min automatically. The analyzer will judge and read the test result automatically and display it in the screen. Or insert the test card into the analyzer after 10min and press “Instant test”, the instrument will judge and read the result automatically.

Within the specified linearity range (0.2-100) ng/mL, linearly dependent coefficient r≥0.990.

【Precautions】

1. Test card is single-use and it cannot be reused.
2. Please inspect packaging integrity and validity of kit before use and then unpack the product. If the product is stored at low temperature, restore to room temperature (15℃-30℃) before unpacking and use. Reagent cannot be used if packaging is damaged and the validity period expires.
3. Take the test card out of the aluminum foil bag and carry out experiment in 15min. Do not place it in the air for a long time to avoid dampness.
4. It is required to strictly comply with the requirements for sample collection and storage. If the sample is turbid, please centrifuge and precipitate it before use.
5. The kit contains products from animals. Eligible information about animal source and sanitary condition cannot absolutely ensure inexistence of infectious pathogen. Therefore, these products should be disposed of as latent infective material, and all samples, reagents and latent contaminants should be disinfected and disposed of according to relevant local regulations.
6. Too high or too low hematocrit of red cells may affect whole blood test result, so verification should be conducted using other methods .

Note:

1) Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in
result. Each user should obtain their own standard curve.
2) If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor.
3) If specimens generate values higher than the highest standard, dilute the specimens and repeat the assay

Our Service

Pre-sale services:

1.Supply our complete catalogue for your reference.

2.Help you to learn more details of our equipment.

3.Design and produce the equipment as per your requirement

4.provide diagnostic solution for you

Sales Service:

1. Professional service of the whole exporting processing .

2. Give supporting on your sales chennel establishment of our products.

3. OEM accepted.

After Services:

1.Guarantee for 1 year

2.Quik answer and solution for any problem during your operation

Packing and Delivery

Packing: Standard packing, neutral packing, OEM packaging are welcome;
Delivery: According to the specific quantity of the product;
Payment: Credit Card, Paypal, Local Bank, Western Union, T/T, etc.

Shipping: International Express, by Air, by Sea, etc;

1. International Express
For MOQ (2ctns to 5ctns),we will recommend you ship the goods by international express(DHL, FedEx, EMS, TNT etc, are all available.) The goods will be shipped within 10~15 days after received the full payment.
2. Air Transportation
Between 5ctns to 10ctns, we will recommend you ship the goods by air. The goods will be shipped within 15~30 days after received the full payment.
3. Sea Transportation
More than 10 ctns we will recommend you ship the goods by sea. The goods will be shipped within 30~45 days after received the full payment.