Dawnergy Technologies(Shanghai) Co., Ltd.
| Payment Terms | T/T, L/C, D/A, D/P |
| Supply Ability | 10,000KM PER DAY |
| Delivery Time | 10-20 work days |
| Packaging Details | Wooden DRUM |
| Product | Duct and Non self supporting Aerial Fiber Optic cable |
| Fiber | G652D |
| Outer Sheath | MDPE |
| Application | Duct and Aerial |
| Strength member | Steel Wire |
| Armored | Steel Strip |
| No. of fiber per tube | 6-24 |
| Brand Name | DAWNERGY |
| Model Number | GYTS |
| Certification | CE/TELCORDIA |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
G657A1 Direct Buried Fiber Cable
Air blowing Cable 12 to 144 CORES GCYFTY
Steel Wire Armored 12 Core OM2 Direct Burial Fiber Cable
DA-GJYX(F)CH Outdoor FTTH Drop Cable Bow Type with 2 Cores
Product Specification
| Payment Terms | T/T, L/C, D/A, D/P | Supply Ability | 10,000KM PER DAY |
| Delivery Time | 10-20 work days | Packaging Details | Wooden DRUM |
| Product | Duct and Non self supporting Aerial Fiber Optic cable | Fiber | G652D |
| Outer Sheath | MDPE | Application | Duct and Aerial |
| Strength member | Steel Wire | Armored | Steel Strip |
| No. of fiber per tube | 6-24 | Brand Name | DAWNERGY |
| Model Number | GYTS | Certification | CE/TELCORDIA |
| Place of Origin | CHINA | ||
| High Light | G652D Aerial Fiber Optic Cable ，MDPE Aerial Fiber Optic Cable ，0.20mm Armored Optic Fiber Cable | ||
Technical data
| No. of cable | 6 | 12 | 24 | |
| Fiber Model | G.652D | |||
| Design(StrengthMember+Tube&Filler) | 1+5 | |||
| Central Strength Member | Material | Steel Wire | ||
| Diameter(±0.05)mm | 1.4 | |||
| Loose Tube | Material | PBT | ||
| Diameter(±0.06)mm | 1.65 | |||
| Thickness(±0.03)mm | 0.25 | |||
| Filler Rope | Material | LDPE | ||
| Diameter(±0.06)mm | 1.65 | |||
| Water Blocking layer(Material) | Flooding Compound | |||
| Armoring | Material | Steel Strip | ||
| Thickness(±0.03)mm | 0.20 | |||
| Outer Sheath | Material | MDPE | ||
| Thickness(±0.2)mm | 1.6 | |||
| Cable Diameter(±0.2)mm | 8.9 | |||
| Cable Wetght(±5.0)kg/km | 82 | |||
| Min. bending radius | Without Tension | 10.0×Cable-φ | ||
| Under Maximum Tension | 20.0×Cable-φ | |||
| Temperature range (℃) | Installation | -20~+60 | ||
| Transport&Storage | -40~+70 | |||
| Operation | -40~+70 | |||
The properties of single mode optical fiber (ITU-T Rec. G.652.D)
| Item | Specification |
| Fiber type | Single mode |
| Fiber material | Doped silica |
| Attenuation coefficient @ 1310 nm @ 1383 nm @ 1550 nm @ 1625 nm |
£ 0.35 dB/km £ 0.32 dB/km £ 0.21 dB/km £ 0.24 dB/km |
| Point discontinuity | £ 0.05 dB |
| Cable cut-off wavelength | £ 1260 nm |
| Zero-dispersion wavelength | 1300 ~ 1324 nm |
| Zero-dispersion slope | £ 0.092 ps/(nm2.km) |
| Chromatic dispersion @ 1288 ~ 1339 nm @ 1271 ~ 1360 nm @ 1550 nm @ 1625 nm | £3.5 ps/(nm. km) £5.3 ps/(nm. km) £18 ps/(nm. km) £22 ps/(nm. km) |
| PMDQ (Quadrature average*) | £0.2 ps/km1/2 |
| Mode field diameter @ 1310 nm | 9.2±0.4 um |
| Core / Clad concentricity error | £ 0.5 um |
| Cladding diameter | 125.0 ± 0.7 um |
| Cladding non-circularity | £1.0% |
| Primary coating diameter | 245 ± 10 um |
| Proof test level | 100 kpsi (=0.69 Gpa), 1% |
Application
| NO. | Item | Requirement | |
| 1 | Allowable Tensile Strength | Short Term | 1500 N |
| Long Term | 600 N | ||
| 2 | Allowable Crush Resistance | Short Term | 1000 (N/100mm) |
| Long Term | 300 (N/100mm) | ||
Main mechanical & environmental performance test
| Item | Test Method | Acceptance Condition |
| Tensile Strength IEC 794-1-2-E1 | - Load: Short term tension - Length of cable: about 50m | - Fiber strain £ 0.33% - Loss change £ 0.1 dB @1550 nm - No fiber break and no sheath damage. |
| Crush Test IEC 60794-1-2-E3 | - Load: Short term crush - Load time: 1min | - Loss change £ 0.05dB@1550nm - No fiber break and no sheath damage. |
| Impact Test IEC 60794-1-2-E4 | - Points of impact: 3 - Times of per point: 1 - Impact energy: 5J | - Loss change £ 0.1dB@1550nm - No fiber break and no sheath damage. |
| Temperature Cycling Test YD/T901-2001-4.4.4.1 | - Temperature step: +20oC→-40oC→+70oC →+20oC - Time per each step: 12 hrs - Number of cycle: 2 | - Loss change £ 0.05 dB/km@1550 nm - No fiber break and no sheath damage. |
Sheath marking
The optical fiber drop cable shall have sequentially numbered length marking at intervals of approximately 1 meter. The starting number of ordering length for any coil shall begin whit zero meter. The accuracy of the measurement of lenth marking shall be held within the limits of ±1%.
a) Manufacturer’s name
b) Type of wire
c) Year and month of manufacture
d) Length marking each meter along the wire
Company Details
Business Type:
Manufacturer
Year Established:
2015
Total Annual:
60000000-62500000
Ecer Certification：
Verified Supplier
Dawnergy is an ISO qualified fiber optic solution provider. With solid production capacity, leading R&D strength and strong customization capabilities in the industry, we have supplied fiber optic products to over 65 countries around the world. Our main products are: Fiber Opti... Dawnergy is an ISO qualified fiber optic solution provider. With solid production capacity, leading R&D strength and strong customization capabilities in the industry, we have supplied fiber optic products to over 65 countries around the world. Our main products are: Fiber Opti...
Get in touch with us
Leave a Message, we will call you back quickly!