Fiberall Technology (Shenzhen) Co., Ltd
| Payment Terms | L/C,T/T,Western Union, MoneyGram,PayPal |
| Delivery Time | 3-5 days |
| Packaging Details | Blister Box/Carton |
| Product name | 1x9 fiber module |
| Encapsulation type | 1x9 |
| Fiber interface | SC |
| Fiber type | SM or MM |
| Laser type | FP or DFB |
| Data rate | 155Mbps |
| Temperature range | 0~70 ℃ |
| Power supply | 3.3V |
| Brand Name | Fiberall or OEM |
| Model Number | FA-TC901S13-40 |
| Certification | CE,FCC, ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
1000BASE - T SGMII Copper Sfp Optical Module With RJ45 For Gigabit Ethernet
10 Gigabit Copper SFP+ Fiber Optic Transceiver With RJ45 Plug 10GBASE-T SFP+
BIDI Long Haul SFP Optical Transceiver LC Single Mode Fiber 1.25G 80KM
1.25G Compatible SFP Transceiver , Dual Fiber Optical Transceiver Module With LC
Product Specification
| Payment Terms | L/C,T/T,Western Union, MoneyGram,PayPal | Delivery Time | 3-5 days |
| Packaging Details | Blister Box/Carton | Product name | 1x9 fiber module |
| Encapsulation type | 1x9 | Fiber interface | SC |
| Fiber type | SM or MM | Laser type | FP or DFB |
| Data rate | 155Mbps | Temperature range | 0~70 ℃ |
| Power supply | 3.3V | Brand Name | Fiberall or OEM |
| Model Number | FA-TC901S13-40 | Certification | CE,FCC, ROHS |
| Place of Origin | China | ||
| High Light | fiber optic transceiver module ，sfp optical transceiver | ||
FA-TC901S13-40, Fiber Optic Transceiver 155Mbps With Dual Fiber SC 1310nm 40Km 3.3V Power Supply
ESD is an inevitable phenomenon in nature, in order to prevent ESD, we can pay attention on two aspects: preventing the accumulation of charge and allowing the electric charge to discharge rapidly:
A, Keep the humidity of the environment 30 ~ 75%RH;
B, Designated special anti-static areas. Use anti-static floor or worktable;
C, Using public grounding with parallel grounding for related equipment and ensure the shortest grounding path and minimum ground loop, cannot use serial grounding and should avoid the use of external connection design for grounding circuit;
D, Operate in special area of anti-static, electrostatic materials are prohibited in anti-static work area, such as no anti-static plastic bags, boxes, foam, tape, notebook, paper, personal items and other items, these materials must be kept in more than 30 cm distance from the electrostatic sensitive devices;
E, Use of anti-static packaging and anti-static turnover box or car during packaging and transportation;
G, Prohibits hot plug operation for non hot plug devices;
H. Avoid using multimeters to detect the sensitive electrostatic pin directly;
I. Do electrostatic protection for fiber optic transceiver during operation (such as wear electrostatic ring or put hand on shell to release static etc.), contact the shell of the optical module , avoid contact PIN feet of the optical module ;
Specification Of FA-TC901S13-40
| Parameter | Symbol | Min. | Max. | Unit | Note |
| Transmitter Section: | |||||
| Differential Input Voltage | VIN | 500 | 2400 | mV | 1 |
| Data Rate | Rate | Mbps | |||
| Optical Output Power | Po | -10 | -3 | dBm | 2 |
| Extinction Ratio | ER | 10 | dB | ||
| Central Wavelength | λ/FP | 1260 | 1360 | nm | |
| Output Spectrum Width | Δλ/FP | 4 | nm | RMS | |
| Output Eye | Compliance With ITU-T G.957 OC-3/STM-1 EYE Mask | ||||
| Optical Rise Time | Tr | 3 | ns | 20%~80% | |
| Optical Fall Time | Tf | 3 | ns | 20%~80% | |
| Receiver Section: | |||||
| Differential Output Voltage | VOUT | 400 | 2000 | mV | 1 |
| Data Rate | Rate | Mbps | |||
| Receiver Sensitivity | S | -34 | dBm | 3 | |
| Optical Input Overload | POL | -8 | dBm | ||
| Operating Central Wavelength | λ | 1260 | 1360 | nm | |
| Signal Detect- Deasserted | PRX_ A | -45 | dBm | ||
| Signal Detect- Asserted | PRX_ D | -34 | dBm | ||
| Signal Detect-Hysteresis | PH | 0.5 | 5 | dB | |
| Electrical | |||||
| Data Output Voltage –Low | VOL –VCC | -1830 | -1555 | mV | |
| Data Output Voltage –High | VOH –VCC | -1085 | 880 | mV | |
| Data Output Rise Time | tr | 3 | ns | ||
| Data Output Fall Time | tf | 3 | ns | ||
| Signal Detect Output Voltage-- Low | VSOL –VCC | -2 | -1.58 | V | |
| Signal Detect Output Voltage-- High | VSOL –VCC | -1.1 | -0.74 | V | |
| Signal Detected Output Rise Time | tr | 3 | ns | ||
| Signal Detected Output Fall Time | tf | 3 | ns | ||
Main characteristics
155Mbps 1310nm 40km;
With single 3.3V DC power supply;
Difference LVPECL inputs and outputs;
Standard SC fiber interface;
Standard industrial 1×9 footprint;
RoHS compliant;
Operating Temperature 0~70℃;
Company Details
Business Type:
Manufacturer
Year Established:
2007
Total Annual:
2000000-3500000
Employee Number:
100~120
Ecer Certification：
Active Member
Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; mainte... Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; mainte...
Get in touch with us
Leave a Message, we will call you back quickly!