Jacketed Mixing Tank Stainless Steel Mixing Tank Opened Double Layer

Product Specification

500L 1000L 1500L 304 316L polished surface stainless steel mixing tank opened double layer

Specifications

It is used for mixing all kinds of liquid products in pharmaceutical, food, chemial and biological

fields.We have different kinds of agitators: 

1-Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. this

kind of agitator is mixing thin viscosity , such as eyedrop, injection, CIP liquid, water, etc... 

2-Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm

or special requirement. this kind of agitator is mixing syrup, injection, blood, oral liquid, culture media,

etc.... 

3-Tank bottom emulsifier, speed max 2900rpm for small vessel, 1480rpm for bigger tank. this

kind of agitator is mixing most high viscosity , such as suspension, oil, lotions ,fat emulsification , etc....

Main technologies

1. Capacity:100L,200L,300L,500L,600L,1000L~5000L and more size .Special tank can be made customered order.
2. Heating form: it adopts heating tubes, inserting into the jacket, to achieve uniform heating, heat transfer oil or water is injected into the jacket as the heating media,thus,the thermal energy is generated to heat the material in the tank
3. Material heating temperature:≤100°c,material heating time:30min-90min(according to the production requirements)
4. Temperature control: it adopts thermocouple and temperature controller to measure and control the temperature, it also can adjust the material temperature up and down.
5. Tank:interal surface are treated by polishing, roughness Ra<=0.4Pm.
6. Top cover: With two easy-open removablecover,convenient to wash,interal surface are treated by polishing, roughness Ra<=0.4Pm.
7. Bottom tank structure angle is formed by metal spinning, no dead space remains after welding,polishing,and no material leaves after releases.
8. Jacket type:fully jacketed, used for injecting into heat transfer oil or water, to achieve the purpose of best warming up  and cooling down during working time.
9. Heat insulating material: it adopts filling pearl cotton, rock wool or polyurethane foaming to keep the temperature range from outside, thus, to achieve the heat insulation and heat preservation purpose. 
10. The shell surface treatment method: mirror polish ,2B primary colors inferior smooth or 2 B grinding surface inferior smooth processing 
11. Agitator: coping centre agitating, lapped joint is adopts to connect speed reducer output shaft and mixing paddle shaft,thus,it's easy to wash.  
12. Mixing RPM:15-120r/min
13. Agitator type: gate type, anchor type, paddle type, turbine type (according to the production requirements).
14. Device configuration: electric control box, temperature controller, liquid material import&export,oil spill hole,etc.
15. Material: inner tank is stainless steel 304 or 316L,Jacket:Q235-B or SUS304,outer protection shells:SUS304.
16. Flanging process arc transition is adopted for each import-export pipe orifice and inner tank welding, which makes our products easy to wash.

 Product paremeter

Advantage for liquid making machine
 

1. Completely Meet GMP

2. Using Japan NSK bearings

3. Material contact part all use SUS316L

4. Safety protecting functions, make the produce saver

5. Homogenizer's design mainly stem from Japanese technology.

6. Siemens Inverter, power-saving, machine-protect, keeping the machine working stably

Stirring scrap and middle stirring rotating the opposite direction make the mixing more equally

7. Burgmamn mechanical seal, seal good, long working life, keep the homogenizer work 24 hours continually.

8. Slow stirring axle adopts 2 sets of mechanical seal and 2 sets frame oil seal, make the seal saver.

9. Install a fall buffer unit on the hydro-cylinder in the hydraulic system; keep the cover up and down stable

Transport & packaging