Daily Chemical Stainless Steel Mixing Tank Inox Vessel With Agitator

Product Specification

sanitary Mirror Polish stainless steel sealed mixing tank inox vessel with agitator

Specifications

1.mirror polish inside & stain polish outside 
2.SS304 or 316L 
3.single-layer,double-layer,3-layer 

Main technologies

1. Capacity:100L,200L,300L,500L,600L,1000L~5000L and more size .Special tank can be made customered order.
2. Heating form: it adopts heating tubes, inserting into the jacket, to achieve uniform heating, heat transfer oil or water is injected into the jacket as the heating media,thus,the thermal energy is generated to heat the material in the tank
3. Material heating temperature:≤100°c,material heating time:30min-90min(according to the production requirements)
4. Temperature control: it adopts thermocouple and temperature controller to measure and control the temperature, it also can adjust the material temperature up and down.
5. Tank:interal surface are treated by polishing, roughness Ra<=0.4Pm.
6. Top cover: With two easy-open removablecover,convenient to wash,interal surface are treated by polishing, roughness Ra<=0.4Pm.
7. Bottom tank structure angle is formed by metal spinning, no dead space remains after welding,polishing,and no material leaves after releases.
8. Jacket type:fully jacketed, used for injecting into heat transfer oil or water, to achieve the purpose of best warming up  and cooling down during working time.
9. Heat insulating material: it adopts filling pearl cotton, rock wool or polyurethane foaming to keep the temperature range from outside, thus, to achieve the heat insulation and heat preservation purpose. 
10. The shell surface treatment method: mirror polish ,2B primary colors inferior smooth or 2 B grinding surface inferior smooth processing 
11. Agitator: coping centre agitating, lapped joint is adopts to connect speed reducer output shaft and mixing paddle shaft,thus,it's easy to wash.  
12. Mixing RPM:15-120r/min
13. Agitator type: gate type, anchor type, paddle type, turbine type (according to the production requirements).
14. Device configuration: electric control box, temperature controller, liquid material import&export,oil spill hole,etc.
15. Material: inner tank is stainless steel 304 or 316L,Jacket:Q235-B or SUS304,outer protection shells:SUS304.
16. Flanging process arc transition is adopted for each import-export pipe orifice and inner tank welding, which makes our products easy to wash.

Advantage for liquid making machine
 
1. High speed disperser .might mixing and disperse viscously, solid and liquid etc. various kind of raw material will be dissolved, during liquid production which can save energy consumption and shorten production the and shorten production period
2. Main adopts stepless timing device which reduce babble occur under low temperature and high viscosity condition less air bubble will be formed
3.To produce liquid washing products, like shampoo, liquid soap, bath shower, dish washing, hand washing, lubricating oil, etc.
4.Finished products can be discharged by valve or match a screw pump. 

Application

It is suitable for production of ointment and cream products in cosmetic and pharmaceutical plants
The emulsifying effect is more prominent for materials of high base viscosity and high solid contet.

♣ Daily chemical and cosmetics industry

 Baby cream, shaving cream, cream shampoo, toothpaste, cold cream, sunscreen cream, face cleanser, moisture cream, detergent, shampoo…
♣ Pharmacy industry
 Emulsion, emulsifier, ointment, syrup….
♣  Food industry
 Sauce, cheese, oral syrup, nutrient solution, infant food, chocolate, saccharine…..
♣ Chemical industry
Latex, saponification, paint, resin, adhesives, lubricating agent