Qingdao fineking New Materials Co., Ltd.
| Payment Terms | T/T |
| Delivery Time | 15-25 |
| Model Number | SR-MJGL |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Product Specification
| Payment Terms | T/T | Delivery Time | 15-25 |
| Model Number | SR-MJGL | Place of Origin | CHINA |
| High Light | Water-based Mold Release Agent ，Semi-permanent Tire Rubber Mould Release ，Improves mold flow Rubber Compound Release Agent | ||
Mold Release Agent
Technical Introduction
This is a water-based, semi-permanent mold release agent containing a specially structured polysiloxane. It quickly forms a uniform and dense thin film on the mold surface, reducing adhesion between the rubber compound and the mold, improving the appearance quality of the product, and reducing the frequency of mold cleaning.
Application Areas:
This mold release agent is suitable for all types of rubber except silicone rubber.
Instructions for Use:
First, the mold should be thoroughly cleaned. Spray application is recommended. For the first application, spray the release agent evenly onto the hot mold 2-3 times and allow it to cure for a period of time. The longer the drying time and the higher the temperature, the more durable the release film will be and the more effective releases will be achieved. Production can begin after these procedures are completed. For subsequent vulcanization processes, simply
spray a thin layer every few cycles and allow it to cure for a period of time.
The number of continuous releases depends on the vulcanization equipment, product, and operating conditions. Spray application is recommended.
Technical Specifications:
Composition: Specially structured polysiloxane emulsion
Appearance: White liquid
pH: 5-8
Packaging:
25kg/plastic drum, 50kg/plastic drum
Safety:
This product will not cause any harm when used correctly.
Storage and Transportation:
According to transportation laws, this mold release agent is a non-hazardous material and should be transported as such. Due to its reactivity, it must be stored in a sealed container and protected from freezing, high temperatures, and direct sunlight. Its shelf life is tentatively set at 3 months.
Company Details
Business Type:
Manufacturer,Exporter,Seller,Other
Year Established:
2010年
Total Annual:
100000000-150000000
Employee Number:
500~500
Ecer Certification：
Verified Supplier
Qingdao fineking New Materials Co., Ltd., established in September 2010, has a first-phase construction area of 100 mu (approximately 6.7 hectares) with a building area of 50,000 square meters. It has six factory bases located on the north side of TCL Avenue, Beian Subdistrict Office, Ji... Qingdao fineking New Materials Co., Ltd., established in September 2010, has a first-phase construction area of 100 mu (approximately 6.7 hectares) with a building area of 50,000 square meters. It has six factory bases located on the north side of TCL Avenue, Beian Subdistrict Office, Ji...
Get in touch with us
Leave a Message, we will call you back quickly!