Chongqing gold mechnical and electrical equipment Co., Ltd
| Payment Terms | L/C,D/A,D/P,T/T, |
| Supply Ability | 5 sets per month |
| Delivery Time | 30 days |
| Packaging Details | Plywood case |
| Product name | Low-Expansion Foam Expansion & Drainage Time Tester |
| Test standard | UL162,EN 1568-1,NFPA 11 |
| Power Supply | AC220V 50/60Hz 10A |
| Foam Gun Pressure | (0.63-0.03)MPa |
| Foam Gun Flow Rate | (11.4-;0.4)L/Min |
| Foam Temperature | (15~20) Degree |
| Ambient Temperature | (15~25) Degree |
| Foam gun stand height | Adjustable from 0.8 to 1.5m |
| Brand Name | GOLD |
| Model Number | GD-UL162 |
| Certification | ISO |
| Place of Origin | China |
View Detail Information
Explore similar products
ISO 12127 Contact Heat Transmission Combustion Tester For Clothing
ISO 834-1 Horizontal Fire Resistance Test Furnace for Building Components and
BS 6387 Cable fire-resistant impact and water spray test equipment for LSZH FR
ISO 9151 EN 367 Protective Clothing Heat Transmission Tester Flame Resistance
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T, | Supply Ability | 5 sets per month |
| Delivery Time | 30 days | Packaging Details | Plywood case |
| Product name | Low-Expansion Foam Expansion & Drainage Time Tester | Test standard | UL162,EN 1568-1,NFPA 11 |
| Power Supply | AC220V 50/60Hz 10A | Foam Gun Pressure | (0.63-0.03)MPa |
| Foam Gun Flow Rate | (11.4-;0.4)L/Min | Foam Temperature | (15~20) Degree |
| Ambient Temperature | (15~25) Degree | Foam gun stand height | Adjustable from 0.8 to 1.5m |
| Brand Name | GOLD | Model Number | GD-UL162 |
| Certification | ISO | Place of Origin | China |
| High Light | UL162 foam extinguishing agent tester ，fire resistance expansion ratio tester ，liquid separation time tester UL162 | ||
| Name | Low-expansion foam liquid foaming multiple and liquid separation time measuring instrument |
|---|---|
| Standard | UL162, EN 1568-1, NFPA 11 |
| Foam solution temperature | 15℃ ~ 20℃ |
| Ambient temperature | 15℃ ~ 25℃ |
| Foam generation system | Consists of a 5L/min foam gun, 1.5-level (0-1) MPa pressure gauge, pressure tank, air compressor, etc. |
| Foam gun | The flow rate measured using water at a pressure of 0.7 ± 0.03 MPa is (5.0 ± 0.1) L/min |
a) Prepare foam solution using fresh water according to required concentration. Control temperature to ensure produced foam temperature is within (15-20)℃.
b) Start air compressor and adjust inlet pressure of foam gun to (0.7±0.03) MPa. Wet inner wall of foam receiving tank, wipe clean, and weigh (m1).
c) After spraying for (5-10) seconds until stabilization, collect foam using eluent analyzer. Start stopwatch, scrape off overflowing foam, weigh (m2), and calculate mass of 25% eluent.
d) Remove receiving container from precipitation analyzer and place on balance. Place foam receiving container on support, ensuring precipitate is free of foam. Stop stopwatch when precipitated liquid reaches 25% of volume.
e) Calculate foaming ratio using specified formula.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Ecer Certification：
Verified Supplier
Since 2008, Chongqing GOLD has developed 70 kinds of fire testing instruments and served many industries such as building materials, aviation, rails, IMO, wire & cable, safety protection, and so on. Quality and Certification:We always adhere to a strict quality control system, and all products ... Since 2008, Chongqing GOLD has developed 70 kinds of fire testing instruments and served many industries such as building materials, aviation, rails, IMO, wire & cable, safety protection, and so on. Quality and Certification:We always adhere to a strict quality control system, and all products ...
Get in touch with us
Leave a Message, we will call you back quickly!