Lab Textile ASTM D1230 45 Degree Burning Rate Tester Fabric Flame Test Apparatus

Product Specification

Lab Textile ASTM D1230 45 Degree Burning Rate Tester Fabric Flame Test Apparatus

Textile ASTM D1230 45 Degree Burning Rate Tester Introduction:

This machine is designed according to the latest edition of the national standard GB/T14645 design and manufacturing; applies to textile fabric in under 45 ° combustion, determination of the damaged area and damage length determination of heat or melt number to provide exposure to the flame length. Combustion evaluation of refractory materials fire-resistant and can be based on compliance with the implementation of standards, measurement of sample is installed at a 45 degree angle light and perfect combustion combustion characteristics. 45 degree flammability tests for measuring burning time and passive smoke glow time, graphic placement sample received some radiation, and fixed heat generated in the Chamber.

Textile ASTM D1230 45 Degree Burning Rate Tester Reference standard:

• ASTM D 1230: Canadian fabric minimum flame test standard
• NFPA 702: Flame Retardant Standards for California Hospital Apparel and Bedding Fabrics
• CATB 117 (2000): Flame retardant test standard for synthetic materials (Section C)
• GB/T 14644-2014: Burning performance of textile fabrics Determination of burning rate at 45°
• ASTM F 963
• 16 CFR 16.10

Textile ASTM D1230 45 Degree Burning Rate Tester Product Parameters:

Combustion characteristic analysis:

Evaluate the flame retardant performance by measuring the intensity, speed, damage area and damage length of the sample after it comes into contact with the flame. (45-degree burning rate tester)

Destruction parameter determination:

Record the damage area and damage length of the sample at 45 degrees, as well as the number of times it comes into contact with the flame when it is heated and melted to a specified length. (45-degree burning damage area tester)

45-degree flammability tester:

includes an airflow-proof ventilation chamber, a standard ignition tool, a sample rack and an automatic timing device, which are used to control the experimental environment and record data.

Brushing device:

consists of a base plate and a trolley, which is used to pre-treat the sample surface to ensure the consistency of the test conditions.

Textile ASTM D1230 45 Degree Burning Rate Tester Feature:

• All-stainless steel enclosure, aesthetically pleasing, corrosion-resistant, and easy to clean;
• Lightweight construction for easy portability;
• Needle valve adjusts flame height to 16mm;
• Brand-name pressure gauge and pressure regulator display gas pressure;
• Heat-resistant glass door allows easy observation of internal test status;
• Power switch for power off;
• Start switch for testing; automatic afterburn timer;
• Microswitch automatically records test end time;
• PLC and touchscreen control system for more automated testing;
• Automatic calculation and storage of burning rate;
• Equipped with a standard custom brush assembly; constructed entirely of stainless steel; the brush applies 150g of pressure to the specimen;
• Each brush has 20 bristles, 0.41 mm in diameter, with four bristles every 25 mm and a length of 19 mm;
• Custom stainless steel 16mm flame height scale;