ChongMing Group (HK) Int'l Co., Ltd
| Payment Terms | T/T, Western Union, Paypal |
| Supply Ability | 3600pcs |
| Delivery Time | 1 day |
| Packaging Details | Please contact me for details |
| Description | IC PROM SRL/PAR 1.8V 32M 48TSOP |
| Input leakage current | -10 to 10 µA |
| Input and output High-Z leakage current | -10 to 10 µA |
| CIN Input capacitance | 8 pF (max) |
| Output capacitance | 14 pF (max) |
| Internal voltage supply current, active mode | 10 mA (max) |
| JTAG supply current, active mode | 5 mA (max) |
| Brand Name | |
| Model Number | XCF32PVOG48C |
| Certification | new & original |
| Place of Origin | original factory |
View Detail Information
Explore similar products
ADUC848BCPZ62-5 Microcontroller IC 8 Bit 12.58MHz 62KB (62K X 8) FLASH 56-LFCSP
STM8S005K6T6C STM8 STM8S Embedded Microcontroller IC 8-Bit 16MHz 32KB (32K X 8)
STM32F072RBH6 STM32F0 Microcontroller IC 32-Bit Single-Core 48MHz 128KB
S912ZVLA12F0MLF Flash Memory IC Chip S12 MagniV Microcontroller IC 16 Bit 32MHz
Product Specification
| Payment Terms | T/T, Western Union, Paypal | Supply Ability | 3600pcs |
| Delivery Time | 1 day | Packaging Details | Please contact me for details |
| Description | IC PROM SRL/PAR 1.8V 32M 48TSOP | Input leakage current | -10 to 10 µA |
| Input and output High-Z leakage current | -10 to 10 µA | CIN Input capacitance | 8 pF (max) |
| Output capacitance | 14 pF (max) | Internal voltage supply current, active mode | 10 mA (max) |
| JTAG supply current, active mode | 5 mA (max) | Brand Name | |
| Model Number | XCF32PVOG48C | Certification | new & original |
| Place of Origin | original factory | ||
| High Light | programming ic chips ，ic programmer circuit | ||
Platform Flash In-System Programmable Configuration PROMs
Features
• In-System Programmable PROMs for Configuration of Xilinx® FPGAs
• Low-Power Advanced CMOS NOR Flash Process
• Endurance of 20,000 Program/Erase Cycles
• Operation over Full Industrial Temperature Range (–40°C to +85°C)
• IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) Support for Programming, Prototyping, and Testing
• JTAG Command Initiation of Standard FPGA Configuration
• Cascadable for Storing Longer or Multiple Bitstreams
• Dedicated Boundary-Scan (JTAG) I/O Power Supply (VCCJ)
• I/O Pins Compatible with Voltage Levels Ranging From 1.8V to 3.3V
• Design Support Using the Xilinx ISE® Alliance and Foundation™ Software Packages
• XCF01S/XCF02S/XCF04S
♦ 3.3V Supply Voltage
♦ Serial FPGA Configuration Interface
♦ Available in Small-Footprint VO20 and VOG20 Packages
• XCF08P/XCF16P/XCF32P
♦ 1.8V Supply Voltage
♦ Serial or Parallel FPGA Configuration Interface
♦ Available in Small-Footprint VO48, VOG48, FS48, and FSG48 Packages
♦ Design Revision Technology Enables Storing and Accessing Multiple Design Revisions for Configuration
♦ Built-In Data Decompressor Compatible with Xilinx Advanced Compression Technology
Absolute Maximum Ratings
| Symbol | Description | XCF01S, XCF02S, | XCF08P, XCF16P, XCF32P | Units | |
| VCCINT | Internal supply voltage relative to GND | –0.5 to +4.0 | –0.5 to +2.7 | V | |
| VCCO | I/O supply voltage relative to GND | –0.5 to +4.0 | –0.5 to +4.0 | V | |
| VCCJ | JTAG I/O supply voltage relative to GND | –0.5 to +4.0 | –0.5 to +4.0 | V | |
| VIN | Input voltage with respect to | VCCO < 2.5V | –0.5 to +3.6 | –0.5 to +3.6 | V |
| VCCO ≥ 2.5V | –0.5 to +5.5 | –0.5 to +3.6 | V | ||
| VTS | Voltage applied to High-Z | VCCO < 2.5V | –0.5 to +3.6 | –0.5 to +3.6 | V |
| VCCO ≥ 2.5V | –0.5 to +5.5 | –0.5 to +3.6 | V | ||
| TSTG | Storage temperature (ambient) | –65 to +150 | –65 to +150 | °C | |
| TJ | Junction temperature | +125 | +125 | °C | |
Notes:
1. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easier to achieve. During transitions, the device pins can undershoot to –2.0V or overshoot to +7.0V, provided this overshoot or undershoot lasts less then 10 ns and with the forcing current being limited to 200 mA.
2. Stresses beyond those listed under Absolute Maximum Ratings might cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those listed under Operating Conditions is not implied. Exposure to Absolute Maximum Ratings conditions for extended periods of time adversely affects device reliability.
3. For soldering guidelines, see the information on "Packaging and Thermal Characteristics" at www.xilinx.com.
Supply Voltage Requirements for Power-On Reset and Power-Down
| Symbol | Description | XCF01S, XCF02S, | XCF08P, XCF16P, | Units | ||
| Min | Max | Min | Max | |||
| TVCC | VCCINT rise time from 0V to nominal voltage(2) | 0.2 | 50 | 0.2 | 50 | ms |
| VCCPOR | POR threshold for the VCCINT supply | 1 | - | 0.5 | - | V |
| TOER | OE/RESET release delay following POR(3) | 0.5 | 3 | 0.5 | 30 | ms |
| VCCPD | Power-down threshold for VCCINT supply | - | 1 | - | 0.5 | V |
| TRST | Time required to trigger a device reset when the VCCINT supply drops below the maximum VCCPD threshold | 10 | - | 10 | - | ms |
Notes:
1. VCCINT, VCCO, and VCCJ supplies can be applied in any order.
2. At power up, the device requires the VCCINT power supply to monotonically rise to the nominal operating voltage within the specified TVCC rise time. If the power supply cannot meet this requirement, then the device might not perform power-on-reset properly.
3. If the VCCINT and VCCO supplies do not reach their respective recommended operating conditions before the OE/RESET pin is released, then the configuration data from the PROM is not available at the recommended threshold levels. The configuration sequence must be delayed until both VCCINT and VCCO have reached their recommended operating conditions.
Company Details
Business Type:
Distributor/Wholesaler
Year Established:
2008
Total Annual:
5000000-7000000
Employee Number:
80~100
Ecer Certification：
Active Member
CHONGMING GROUP (HK) INT'L CO., LTD. located in Hong Kong and Shenzhen. We are an independent Distributor of Electronic Components,established in 2008. AS a growing fast company, CM GROUP is renowned for its world-class efficiency, excellent services, and extraordinary ability to supply electron... CHONGMING GROUP (HK) INT'L CO., LTD. located in Hong Kong and Shenzhen. We are an independent Distributor of Electronic Components,established in 2008. AS a growing fast company, CM GROUP is renowned for its world-class efficiency, excellent services, and extraordinary ability to supply electron...
Get in touch with us
Leave a Message, we will call you back quickly!