Construction Lifter Sc200/200 Sc200 Building Elevator Lift Passenger

Product Specification

Engineering Construction SC200/200 SC100 Contracting 

The SC200/200 designation indicates a specific type of construction hoist or personnel and material lift that is designed with dual cages or platforms, each capable of carrying its own load. Here's a detailed breakdown of what the SC200/200 represents and its features, particularly focusing on its passenger-carrying capabilities:

SC200/200 Explanation:

• SC: As mentioned before, stands for "Construction Hoist" and denotes the equipment's purpose in the construction industry.
• 200/200: This notation specifies that the hoist is configured with two independent cages, each with a rated loading capacity of 2000 kg (approximately 4400 pounds). This means the hoist can lift a combined weight of 4000 kg when both cages are fully loaded.

Features and Considerations for Passenger Use:

1. Safety Standards: When used for transporting passengers, it's imperative that the SC200/200 complies with strict safety standards, such as those set by OSHA (Occupational Safety and Health Administration) in the United States, or equivalent bodies in other countries. This includes having emergency stop buttons in each cage, safety gates, and overloading prevention mechanisms.

2. Comfort and Capacity: Each cage is designed to accommodate passengers comfortably and safely. This includes adequate space, good ventilation, and lighting. The exact number of passengers each cage can carry depends on the cage size and local regulations but is typically around 12 to 20 persons per cage, considering an average weight per person.

3. Speed and Control: The lift operates at a controlled speed suitable for passenger comfort, usually adjustable based on the hoist's design. Smooth acceleration and deceleration are essential to avoid sudden movements that could discomfort or endanger passengers.

4. Intercommunication: An effective communication system between the cages and ground control is vital for emergency response and operational instructions.

5. Weather Protection: For outdoor installations, the cages are typically enclosed or partially enclosed to protect passengers from weather elements.

6. Regular Maintenance: Frequent inspections and maintenance are crucial to ensure all safety features are functioning correctly and to prevent accidents.

7. Installation and Stability: The hoist must be installed securely and anchored to the building structure following strict engineering guidelines to ensure stability during operation.

Here is our model:

Temporary or Permanent Installation: Construction hoists can be either temporarily or permanently installed. Temporary hoists are commonly used during the construction phase and are dismantled once the project is completed. Permanent hoists, on the other hand, are designed for long-term use in buildings where vertical transportation is required even after construction, such as in high-rise buildings or multi-story structures.

Installation and Maintenance: Construction hoists are installed within the building or at the construction site using a hoist shaft or temporary structure. The installation process involves securing guide rails, assembling the drive machinery, and installing the carriages. Regular maintenance and inspections are essential to ensure the safe and reliable operation of the hoist. This includes routine checks of the electrical systems, mechanical components, safety devices, and compliance with relevant safety regulations.

1.High quality of motor, low noise NORD Brand ,Schneider Control
2.Strong load ability, low voltage start
3.Reasonable optimization design, compact structure, convenient installation and debugging
4.Running the lift elevator before the delivery
5.Driving mechanism refueling debugging, customer without refueling
6.Selects the high quality gear reducer and anti dropping device

Q1: Are you a trading company or a factory?
A1: We are a trading company and have our own factory. We have both the price advantage of the factory and the thoughtful service of the trading company; and the advantage of taking responsibility.
Q2: How long is your delivery time?
A2: If the goods are in stock, usually 5-10 days. Or if the goods are not in stock, then 15-20 days, depending on the quantity.
Q3: Do you provide samples ?
A3: In this field, we seldom provide samples, but it depands.
Q4:Why choose us?
A4: First,our product quality assurance and warranty for one year, steel structure warranty for lifetime and the price is cheap ;Second,we have 11 years of industry experience, so we are very professional.
Q5:Can we visiting your factory?
A5: We warmly welcome your visiting.