Eco Friendly Commercial Floor Cleaning Machines With 40L Solution Tank

Product Specification

Key Features of the VC20 Floor Scrubber:

✅ Cordless Freedom & Superior Maneuverability

Powered by long-lasting batteries, the VC20 moves smoothly and flexibly without the hassle of cords or outlets. Clean large areas without interruptions!

✅ Intuitive Controls for Effortless Operation

Smart LED Button Switch (red/green lights) with pictographic function icons—easy to understand, even for first-time users.

Minimal training required, reducing labor costs and downtime.

✅ Leak-Proof Water Supply System

Equipped with a solenoid valve to prevent water leakage, ensuring consistent performance and no wasted cleaning solution.

✅ Effortless Brush & Squeegee Adjustment

Dual-lever control for quick raising/lowering of brushes and squeegees—no bending or manual adjustments needed.

Automatic squeegee uncoupling protects the unit if accidentally impacted, preventing damage.

✅ Large-Capacity Tanks for Uninterrupted Cleaning

High-volume solution tank fills quickly, reducing refill downtime.

Efficient filtration system prevents water from entering the vacuum motor, ensuring longer motor life.

✅ Durable, Low-Maintenance Design

PU-reinforced drive wheels resist corrosion and wear, extending lifespan.

Brush-type water-retaining skirt (instead of traditional rubber) for easier handling, anti-aging, and longer use.

Removable squeegee system—install or replace in seconds with no hassle.

✅ Enhanced Visibility & Easy Maintenance

Transparent brush cover window allows for quick visual inspection.

Fast brush installation/removal—saving time on maintenance.

✅ Quiet & Energy-Efficient Operation

Optimized silencer technology reduces noise for a more comfortable work environment.

ECO mode extends battery life while minimizing power consumption and noise.

How to Use the Dycon VC20 Industrial Scrubber for Post-Renovation Cleaning

After a home renovation, floors are often covered in dust, paint splatters, adhesive residues, and construction debris. The Dycon VC20 Industrial Scrubber is the perfect machine for fast, thorough, and dust-free cleaning. Here’s a step-by-step guide to using it effectively.

Step 1: Pre-Cleaning Preparation

① Remove Large Debris

Sweep or vacuum loose nails, glass shards, and chunks of drywall to prevent scratch damage to the scrubber’s brush.

Use a putty knife to scrape off dried paint or glue (avoid metal scrapers on delicate floors).

② Pre-Treat Stubborn Stains

Dust & Powder Residues: Lightly mist with water to prevent airborne dust when scrubbing.

Paint & Adhesive Stains: Apply a neutral pH cleaner (avoid acids/alkalis) and let sit for 3-5 minutes before scrubbing.

Sticky Tape Residue: Use a citrus-based adhesive remover for safe dissolving.

Step 2: VC20 Setup for Renovation Cleaning

① Attach the Right Brush

Hard Bristle Brush → Best for tile, concrete, and epoxy floors (aggressive scrubbing).

Soft Brush → For finished wood or polished stone (gentler clean).

② Adjust Squeegee & Water Flow

Set the squeegee angle for maximum water recovery (prevents streaks).

Fill the clean water tank with warm water + renovation-grade cleaner (follow dilution ratios).

Install a fine filter in the dirty water tank to trap fine dust.

Step 3: Cleaning Process

① First Pass – Deep Scrub (Power Mode)

Move in slow, overlapping "S" patterns to loosen grime.

Focus on high-traffic areas & corners (adjust brush pressure if needed).

For wall edges, tilt the machine slightly to reach baseboards.

② Immediate Water Recovery

Check the transparent squeegee window to ensure no dirty water remains.

Empty the dirty water tank frequently (construction debris fills it quickly).

③ Second Pass – Rinse (ECO Mode)

Refill with clean water only.

Switch to soft brush & ECO mode for a final polish.

Step 4: Post-Cleaning Maintenance

① Machine Care

Rinse brushes & tanks immediately (dried concrete dust can clog the system).

Inspect filters and clean/replace if clogged.

② Floor Drying & Protection

Use a microfiber mop to dry floors (prevents water marks on sensitive surfaces).

For porous stone/tile, apply a sealer after cleaning.

Why VC20 is Perfect for Post-Renovation Cleaning?

✔ Dust-Free Cleaning – Sealed suction prevents dust clouds (unlike brooms).

✔ Stain Removal Power – Adjustable brush pressure tackles paint, glue, and grout haze.

✔ Reaches Every Corner – Maneuverable design cleans under cabinets & tight edges.

✔ Saves Time & Labor – Cleans 3x faster than manual mopping.

Pro Tips

⚠ Avoid using on freshly sealed floors (wait 72 hours).