Customizable 0-20% VOL Methane Air Sensor Module with Peak Current 210mA for

Utilizing TD-LAS technology, the 3.3V methane sensor detects methane through its unique absorption spectrum using a 1653.7nm laser, with resistance to interference from water vapor and other gases. Combining direct absorption with wavelength modulation, it features an "N" type optical path structure for extended absorption and high precision. Equipped with low-temperature laser components and a temperature correction algorithm, the sensor performs well across various environments. The standard communication protocol and threaded interface increase its compatibility, making it ideal for methane leak detection and alarms in industries like catering, chemical, and coal mining.

• High detection accuracy
  Direct and wavelength modulation technology combined with folded optical path design, measurement error ≤±6% true value @25℃
• Good environmental adaptability
  Wide temperature compensation correction algorithm, can meet -40~+70℃ application
• Strong anti-interference
  Methane "fingerprint spectrum" laser absorption detection technology, anti-poisoning, anti-water vapor and other gas interference;
• Strong structural protection
  Stainless steel material design, meets the explosion-proof level Exia IIC T6 Ga
• Low cost
  Long service life, low power consumption, modular design, easy to integrate

a) The sensor continuously outputs the measured methane concentration, measured temperature, measured pressure, laser signal strength, laser operating temperature and fault code through the standard TTL serial port

b) It has a self-test function, which can detect whether the laser, photoelectric detector and voltage stabilization sensor are normal, which helps to eliminate the fault point.

Interface form: SH1.0mm/4P

Cable length: 200mm

(1) Communication interface configuration

UART serial port: Baud rate: 115200, data bits: 8 bits,

Stop bit: 1 bit, parity bit: no check

(2) Description of communication protocol

After the sensor is powered on, it goes through a period of preprocessing (6-10s) and then begins to periodically (1Hz) output a fixed-length string. The string format is shown in the figure above.

Output string parsing (sample):

A 000.00 + 24.0 + 1006.22 + 16.1 + 006.0 B 00 13

A: the frame head;

+000.00: methane concentration value, two decimal places reserved, unit %vol;

+ 24.0: the environment temperature, the unit ℃;

1006.22: the environment pressure, the unit hPa;

16.1: the laser light intensity and effective range 3.6 21.6;

006.0: magnification factor, normal range 1.0-126.0;

00: fault codes

01: abnormal optical signal; 02; Ambient temperature or abnormal pressure; Optical signal is too strong; 04 laser temperature anomaly;

05: light signal is too weak;

13: xor check code

a) The working voltage of the sensor is 3.3V, and the serial interface level is 3.3V;

b) sensor contains precision optical components, please avoid violent collision;

c) Working environment conditions: -40℃ ~ +70℃

d) Relative humidity 0-99% RH (non-condensation).

Note: The working voltage of the sensor is 3.3V. It is forbidden to connect the power supply voltage exceeding 3.6VDC to the sensor to avoid damage to the sensor.

We offer technical support for Gas Detector Sensors, including expert trouble, repair, and maintenance. Our services also cover calibration and testing to maintain accurate readings, and we provide product documentation and manuals. We assist with product selection and customization, ensuring the highest level of service for the optimal operation of your gas detectors.

Product Packaging:
Gas Detector Sensor unit
User manual
Mounting hardware
Calibration certificate
Shipping Information:
Expected delivery time: 5-8 business days