Sinof Hi-tech Material Co., Ltd.
| Form | Pellet |
| MFR | 8.1-12 |
| Processing Method | Extrusion Molding, Injection Molding |
| Packaging Details | woven plastic bag with inner polyethylene bag |
| Payment Terms | L/C, T/T |
| Brand Name | Sinof |
| Model Number | SF-4021 |
| Place of Origin | China |
View Detail Information
Explore similar products
Fluoropolymer Resin ETFE Granule With MFR 0.8-2SF-4021
Ethylene Tetrafluoroethylene ETFE Resin With MFR 2.1-4.0 SF-4022
MFR 4.1-8.0 Raw Material ETFE Resin For Extrusion Molding SF-4023
Granular Fluoroplastic Resin ETFE Pellet MFR 12.1-16 SF-4025
Product Specification
| Form | Pellet | MFR | 8.1-12 |
| Processing Method | Extrusion Molding, Injection Molding | Packaging Details | woven plastic bag with inner polyethylene bag |
| Payment Terms | L/C, T/T | Brand Name | Sinof |
| Model Number | SF-4021 | Place of Origin | China |
| High Light | MFR 8.1 ETFE Resin Pellets ，ETFE pellets for injection molding ，ETFE Resin With MFR 8.1 | ||
ETFE Pellet for Molding SF-4024 with MFR 8.1-12
Product Description
Ethylene-tetrafluoroethylene, also known as ETFE, is one of the strongest fluorine plastics with good mechanical properties, weather resistance, flame retardant, gas barrier properties and chemical resistance. In addition to the similar properties like other fluorine resins, it also shows good radiation resistance, strong adhesion with metal surface, and is lighter than other fluorinated materials.
Grades
| Grade | MFR g/10min | Molding method | Application |
| SF-4021 | 0.8-2.0 | Molding | Mainly for heat shrinkable tube, lining, cable insulation. |
| SF-4022 | 2.1-4.0 | Extrusion Molding | Mainly for cable insulation and thin-walled tubes. |
| SF-4023 | 4.1-8.0 | Extrusion Molding | Mainly for cable insulation, pipes, plates, films. |
| SF-4024 | 8.1-12.0 | Extrusion Molding, Injection Molding | Mainly for cable insulation, injection molded parts, pipes, plates, films. |
| SF-4025 | 12.1-16.0 | Extrusion Molding, Injection Molding | |
| SF-4026 | 16.1-20.0 | Extrusion Molding, Injection Molding | |
| SF-4027 | 20.1-24.0 | Extrusion Molding, Injection Molding | |
| SF-4028 | ＞ 24.0 | Extrusion Molding, Injection Molding | Mainly for thin-walled sheathed wires, crosslinked cables, pipes, plates, films |
Properties
| Property | Unit | Method | SF-4021,SF-4022,SF-4023,SF-4024,SF-4025,SF-4026,SF-4027,SF-4028 |
| Appearance | - | - | Transparent pellets, without impurities such as metal shavings and sand particles. The percentage of particles containing visible black spots is less than 1%. |
| Specific Gravity | g/cm³ | ASTM D792 | 1.70-1.82 |
| Tensile Strength | MPa | ASTM D638 | ≥ 30 |
| Elongation | % | ASTM D638 | ≥ 300 |
| Flexural Modulus | MPa | ASTM D790 | 800-1000 |
| Flexural Strength | MPa | ASTM D790 | 20-30 |
| Impact Strength | Ft-lb/in | ASTM D256 | No Break |
| Hardness | °/Shore D | GB/T 2411-2008 | ≥ 50 |
| Melting Point | ℃ | DSC | 220-270 |
| Oxygen Index | % | GB/T 2406.2-2009 | ＞ 32 |
| Flammability | - | UL94 | V-0 |
| Dielectric Constant | - | ASTM D150(106) | ＜ 2.4 |
| Dielectric Loss | - | ASTM D150(106) | 0.008 |
Attention
1. When dealing with ETFE powder for deep processing, operators must wear protective cloth and mask to avoid potential safety hazards, such as inhalation of dust and toxic gas, or hurt by high temperature. No open flame and smoking in workplace. Exhaust devices should be installed.
2. When dealing with ETFE pellet for deep processing, operators must strictly control processing technic. Processing temperature should not be kept no more than 350℃. Wear protective cloth and mask to avoid potential safety hazards, such as inhalation of dust and toxic gas, or hurt by high temperature. The workplace should be tidy and ventilated.
3. Product waste must be handled properly following local laws and regulations.
Packaging, Transportation and Storage
1. Double-layered polyethylene sealed and then packed in carton. 10Kg/bag, 20Kg/carton.
2. The product should be stored in cool ventilated place and away from fire source and heat source. It should also be prevented against moisture and sunshine, kept in upright position and handled with great care.
3. Once opened, unused product should be repacked to avoid any dust or contamination.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Importer,Exporter,Trading Company,Seller
Year Established:
2001
Total Annual:
2000000-2500000
Employee Number:
80~100
Ecer Certification：
Verified Supplier
As a leading supplier of fluoro plastic industry, Sinof has been participating in this area over 20 years. With our talented R&D team and special technology, we can supply PTFE, PVDF, FEP, PFA, ETFE, PEEK, PPS, etc. in form of pellet, powder, dispersion. We supply the most commonly used grades a... As a leading supplier of fluoro plastic industry, Sinof has been participating in this area over 20 years. With our talented R&D team and special technology, we can supply PTFE, PVDF, FEP, PFA, ETFE, PEEK, PPS, etc. in form of pellet, powder, dispersion. We supply the most commonly used grades a...
Get in touch with us
Leave a Message, we will call you back quickly!