Multi-Approved Novec 1230 Clean Extinguishing Agent for Commercial and

Product Specification

Novec 1230 Fire Extinguishing Agent – Clean, Safe & Sustainable Fire Protection

Novec 1230 fire extinguishing agent is a next-generation clean agent designed for automatic fire suppression systems, offering an unmatched balance of human safety, asset protection, and environmental sustainability. As a leading FM200 system and halon alternative, this Novec 1230 gas (FK-5-1-12) delivers rapid fire knockdown without damaging sensitive equipment or leaving any residue, making it the ideal choice for mission-critical facilities.

What is Novec 1230?

Novec 1230 fluid is a fluorinated ketone (C₆F₁₂O) manufactured by 3M, with the chemical formula CF₃CF₂C(=O)CF(CF₃)₂. Unlike traditional halocarbon agents, it is a liquid at room temperature (boiling point: 49°C) and vaporizes instantly upon discharge through specialized nozzles, distributing as a gas within seconds to suppress fires primarily through heat absorption.

Key Advantages

Environmental Profile

Novec 1230 sets the benchmark for sustainable fire protection:

• ODP = 0 – Does not deplete the ozone layer

• GWP = 1 – Equivalent to carbon dioxide

• Atmospheric Lifetime ≈ 5 days – Minimal environmental persistence

• Not targeted for phase-down – Not subject to Montreal Protocol or F-gas regulations, offering long-term investment security

Typical Applications

Novec 1230 fire extinguishing agent is widely used in total flooding systems, localized applications, and portable extinguishers for specialized hazards. It is the preferred choice for protecting high-value assets in:

• Data Centers & Server Rooms – Protects IT infrastructure without residue or downtime

• Museums, Archives & Libraries – Safeguards irreplaceable artifacts and documents with zero residue and no chemical reaction with paper or canvas

• Hospitals & Laboratories – CT/MRI rooms, clean rooms, and research facilities where safety for occupants is paramount

• Telecom Facilities & Control Rooms – Switch rooms, airports, and broadcasting centers

• Marine Applications – Engine rooms, pump rooms, paint lockers on merchant and offshore vessels

• Oil & Gas Facilities – Control rooms, compressor stations, and offshore platforms where continuity is vital

• Power Generation – Turbine rooms, substations, and switchgear rooms

• Financial Institutions & Government Facilities – Banks, treasuries, and secure data storage

Safety & Human Protection

Novec 1230 provides the widest margin of safety among all clean agents. The No Observed Adverse Effect Level (NOAEL) is greater than 10%, significantly above typical design concentrations (around 4-6%), offering up to 100% safety margin for occupied spaces. This makes it suitable for areas where personnel may be present during system discharge.

Handling & Logistics

One of the operational advantages of Novec 1230 is its liquid state at room temperature:

• Stored in lightweight containers – Not pressurized like traditional gases

• Can be shipped by air – No transportation restrictions

• Simplified refilling – Fluid can be poured into cylinders before pressurization with nitrogen

• On-site recharge possible – Cylinders can be recharged without removal, ideal for offshore and remote facilities

Frequently Asked Questions

Q: How does Novec 1230 extinguish fires?

A: Novec 1230 works primarily through heat absorption (cooling), removing heat energy from the fire and interrupting the combustion process. Unlike inert gases, it does not rely on oxygen reduction, making it safer for occupied spaces.

Q: Is Novec 1230 safe for occupied spaces?

A: Yes. It has the largest safety margin of any clean agent, with a NOAEL of >10% compared to typical design concentrations of 4-6%.

Q: Is Novec 1230 affected by environmental regulations?

A: No. It has zero ODP, GWP < 1, and is not targeted for phase-down under the Montreal Protocol or EU F-gas regulations. 3M offers a 20-year Blue Sky™ Warranty supporting its long-term viability.

Q: Can Novec 1230 be used to replace existing FM200 or Halon systems?

A: Yes. Existing piping may require modification, but Novec 1230 can be adapted to most halon 1301 and FM200 systems with appropriate engineering review.

Q: Is Novec 1230 compatible with system components?

A: Yes. It is compatible with typical materials used in fire suppression systems, including metals and most elastomers. However, fluoroelastomers should be avoided as they have similar composition and may be incompatible