| Payment Terms | T/T,L/C |
| Cutting Thickness | 2-300 mm |
| Supply Ability | 3 sets per season |
| Power | 13.54 kW |
| Machine Weight | 3000 kg |
| Packaging Details | TO BE DETERMINED |
| Cutting Size | 2150×3000 mm |
| Delivery Time | 45 working days after downpayment |
| Cutting Height | 1250 mm |
| Positioning Accuracy | ±0.05 mm |
| Certification | CE |
| Place of Origin | Qingdao |
| Brand Name | Xinmeiteng |
| Model Number | TDP-2150 |
View Detail Information
Explore similar products
Auto Pu Foam Cutting Machine cylinder foam round peeling auto roll up Machine
Affordable Horizontal Foam Splitter Cutting Machine For Budget-friendly
High Speed High Precision Pu Foam Cutting Machine Horizontal
C-618 Cutting-edge Carousel horizontal splitting machine (with pressure roller)
Product Specification
| Payment Terms | T/T,L/C | Cutting Thickness | 2-300 mm |
| Supply Ability | 3 sets per season | Power | 13.54 kW |
| Machine Weight | 3000 kg | Packaging Details | TO BE DETERMINED |
| Cutting Size | 2150×3000 mm | Delivery Time | 45 working days after downpayment |
| Cutting Height | 1250 mm | Positioning Accuracy | ±0.05 mm |
| Certification | CE | Place of Origin | Qingdao |
| Brand Name | Xinmeiteng | Model Number | TDP-2150 |
| High Light | Horizontal Sponge Slicing Machine ,TDP-2150 PU Foam Cutting Machine ,Touch Screen Foam Slicing Machine | ||
Product Introduction
The TDP-2150 is a wide horizontal sponge slicing machine built to split foam blocks into thin sheets at production speed. Its worktable is digitally controlled and fitted with an air suction device that increases friction and adsorption between the table and the sponge during cutting, so the block stays where it was placed. That single detail is what separates an accurate slice from a sheet with a tapered or waisted edge.
The working envelope is generous: a cutting size of 2150*3000 mm, a cutting height of 1250 mm and a thickness range of 2-300 mm. Operators set the required thickness on the touch screen, taking foam density into account, and the table reciprocates automatically until the block has been cut to the required size.
The band knife angle can be adjusted from 0° to 5°, which gives the operator a way to match the cutting geometry to the material instead of forcing one fixed blade angle onto every foam type. For thick blocks, an optional pressure roller can be added to stop the foam sliding during the cut, which keeps the sheet thickness more consistent from the first slice to the last.
With 13.54 kW of power and a 3000 kg machine weight, the TDP-2150 is sized for furniture, mattress, packaging and sponge deep-processing plants that slice blocks daily and need the output to feed a lamination or cutting line without interruption.

The machine combines a large reciprocating worktable, a band knife cutting head, an air suction system and a touch screen control unit. Each part supports a different part of the accuracy problem.

| Item | Parameter |
|---|---|
| Cutting size (W*L) | 2150*3000 mm |
| Cutting height | 1250 mm |
| Cutting thickness | 2-300 mm |
| Positioning accuracy | ±0.05 mm |
| Power | 13.54 kW |
| Machine weight | 3000 kg |
| Overall dimension (L*W*H) | 7000*4000*2500 mm |
| Control | Touch screen with digital thickness setting |
| Worktable | Reciprocating table with air suction device |
| Band knife | Cutting angle adjustable from 0° to 5° |
| Certification | CE |
On a wide slicing machine, most thickness problems start with the block moving. Foam is light, and a 3000 mm table gives the material plenty of room to creep once the blade starts pulling. The TDP-2150 addresses this with an air suction worktable: the block is pulled down against the table surface, which raises friction and adsorption and holds the block in place through the whole stroke.
Two further settings support the same goal. The band knife angle can be adjusted between 0° and 5°, letting the operator compensate for how a particular foam density shears under the blade instead of compressing. And where a block is thick or dense enough that suction is not sufficient on its own, the optional pressure roller adds mechanical hold-down so the foam cannot slide.
Positioning accuracy is ±0.05 mm on the table movement, but the practical result still depends on the block itself: a block with a sloped base will reproduce that slope, so the bottom should be flat before slicing.



The machine requires a level concrete floor that can carry 3000 kg, a 13.54 kW supply matched to your voltage and frequency, and clearance around the 7000*4000*2500 mm footprint for block loading and sheet removal. A layout drawing, wiring diagram and English operation manual are supplied; commissioning support is provided remotely, and on-site installation with operator training can be arranged on request.
Routine maintenance centres on the suction system, because blocked table holes reduce hold-down force and accuracy drops before any other symptom appears: clean the table surface and suction filter daily, check band knife tension and tracking at the start of each shift, and lubricate the table ways weekly. Spare band knives and suction filter elements can be shipped with the machine.

Every machine is assembled, aligned and run before shipment. The table travel is checked for repeatability, the suction system is tested on sample foam, and a block is sliced to confirm thickness across the full width. Electrical configuration is CE compliant for European and other export markets.
The main frame is shipped with rust-proof treatment and protective film, while the touch screen, control cabinet and small spare parts are packed in wooden cases. Standard delivery is 45 working days after the down payment is confirmed, shipped from Qingdao port. Payment terms are T/T or L/C, minimum order quantity is one set, and supply ability is three sets per season.
The air suction worktable holds the block against the table to prevent slipping. For thick or dense blocks, add the optional pressure roller for extra hold-down.
The angle can be set between 0° and 5° to match how a given foam density shears under the blade, which reduces compression and gives a cleaner sheet edge.
It can slice down to 2 mm, but thin sheets need slower feed and careful suction. If ultra-thin continuous sheet is your main product, a skiving machine such as the TDPB-1900 is the better match.
It cannot be cut in one pass. The maximum cutting size is 2150*3000 mm with a 1250 mm height, so oversized blocks must be split first.
Keeping the suction table and filter clean. Blocked holes reduce hold-down force and thickness accuracy drops, so clean them daily along with a band knife tension check each shift.
Tell us your foam type and density, block size, target sheet thickness and daily output. We will confirm the table configuration, suction system, pressure roller option and delivery schedule, and can arrange a slicing test on your material at our Qingdao plant or by video.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!