| Packaging Details | TO BE DETERMINED |
| Supply Ability | 3 sets per season |
| Cutting Speed | 0-50 m/min |
| Cutting Height | 1300 mm |
| Machine Weight | 3500 kg |
| Motor Power | 17.84 kW |
| Delivery Time | 45 working days after downpayment |
| Cutting Thickness | 2-300 mm |
| Payment Terms | L/C,T/T |
| Cutting Size | 3000*2000 mm |
| Brand Name | Xinmeiteng |
| Certification | CE |
| Model Number | TDSA-2150 |
| Place of Origin | Qingdao |
View Detail Information
Explore similar products
Auto Pu Foam Cutting Machine cylinder foam round peeling auto roll up Machine
Affordable Horizontal Foam Splitter Cutting Machine For Budget-friendly
High Speed High Precision Pu Foam Cutting Machine Horizontal
C-618 Cutting-edge Carousel horizontal splitting machine (with pressure roller)
Product Specification
| Packaging Details | TO BE DETERMINED | Supply Ability | 3 sets per season |
| Cutting Speed | 0-50 m/min | Cutting Height | 1300 mm |
| Machine Weight | 3500 kg | Motor Power | 17.84 kW |
| Delivery Time | 45 working days after downpayment | Cutting Thickness | 2-300 mm |
| Payment Terms | L/C,T/T | Cutting Size | 3000*2000 mm |
| Brand Name | Xinmeiteng | Certification | CE |
| Model Number | TDSA-2150 | Place of Origin | Qingdao |
| High Light | Vacuum Suction Slicing ,Soft Belt Conveyor Feed ,Stable Foam Feeding | ||
The TDSA-2150 is a horizontal foam slicer with vacuum suction and a soft belt conveyor. Cutting size is 3000*2000 mm, thickness range is 2-300 mm, cutting speed is 0-50 m/min, motor power is 17.84 kW, machine weight is 3500 kg and cutting height is 1300 mm. The machine is CE certified.
A sliced sheet that moves under the blade is scrap. Soft foam grips the band knife and slides forward with it, so the sheet comes out thicker at the leading edge and thin at the trailing edge, and the operator blames the thickness setting. Vacuum suction on the table is what holds the block in place.
The soft belt conveyor solves the other half. Blocks are fed onto the table and sheets leave it without being lifted, so the operator is not reaching across the blade line between passes. That is as much a safety point as a productivity one.
The block is held flat on the table so it cannot ride the blade.
Blocks feed in and sheets leave without lifting across the blade.
Belt drive keeps the pass speed steady from start to finish.
The belt links to a peeler or another slicer for continuous flow.
If sheets start running thick on one side, release the vacuum and check the block base before touching the thickness setting. Nine times out of ten the block is rocking, not the machine.
Soft foam is light and springy. Under a band knife it compresses slightly then releases, and that release is what pushes the block forward. Without suction the block creeps a few millimetres per pass, which is invisible on the first sheet and obvious on the tenth.
Suction also holds the block flat. A block with a slightly uneven base rocks on a plain table, so the sheet tapers across its width. Pulling the block down onto the table removes the rock and makes the thickness setting mean something at both edges.
The soft belt then keeps the pass speed steady. A hand-fed block speeds up and slows down with the operator, and a band knife cuts differently at each speed. Belt drive makes every pass the same.
| Parameter | Value |
|---|---|
| Model | TDSA-2150 |
| Machine type | Horizontal foam slicer with soft belt conveyor |
| Cutting size | 3000*2000 mm |
| Cutting height | 1300 mm |
| Cutting thickness | 2-300 mm |
| Cutting speed | 0-50 m/min |
| Motor power | 17.84 kW |
| Machine weight | 3500 kg |
| Overall dimension | 7000*4500*2500 mm |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Sheet thickness varies across the width | Band knife tension or guide wear | Re-tension the blade and check the guides |
| Foam slipping during the cut | Vacuum or conveyor grip too low for the block density | Raise the suction and check the belt surface |
| Wavy cut face | Feed speed too high for the foam | Reduce the feed rate and re-check blade sharpness |
| Blade drifting off line | Worn wheel or misaligned tracking | Re-track the blade and replace worn wheels |
The machine travels in an export-grade wooden case with the electrics protected and the cutter or blade assembly braced separately. Machine weight is 3500 kg and the overall dimension is 7000*4500*2500 mm, so the unit is quoted against a 20ft or 40ft container depending on the line it ships with.
A packing list, wiring diagram, operation manual and CE declaration travel with every unit. Delivery is 45 working days after downpayment; installation and commissioning support is available remotely or on site.
A: Vacuum suction pulls the block down onto the table and the soft belt holds a steady feed rate through the pass.
A: Flexible PU foam blocks from low density packaging foam to denser mattress and furniture foam.
A: On the touch screen; the table reciprocates automatically to the set thickness.
A: 45 working days after downpayment, with installation and commissioning support available.
Tell us the block size, the sheet thickness range and the foam density you cut. We will confirm the TDSA-2150 configuration, quote the machine and share the delivery schedule. Band knives, guide wheels and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!