| Delivery Time | 45 working days after downpayment |
| Packaging Details | TO BE DETERMINED |
| Boring Length | 2300 mm |
| Machine Weight | 800 kg |
| Overall Dimension | 6000*1500*1800 mm |
| Boring Diameter | 45-80 mm |
| Payment Terms | L/C,T/T |
| Supply Ability | 3 sets per season |
| Motor Power | 1.5 kW |
| Spindle Speed | 230 r/min |
| Brand Name | Xinmeiteng |
| Certification | CE |
| Model Number | TDP-52 |
| Place of Origin | Qingdao |
View Detail Information
Explore similar products
Textile Industry Foam Drilling Machine Automatic Hole Punching Machine
Horizontal Foam Drilling Machine Precise Sponge Foam Drilling Equipment
C518 Integrated Foam Drilling Machine
CE Foam Drilling Machine Circular Foam Automatic Punching Machine
Product Specification
| Delivery Time | 45 working days after downpayment | Packaging Details | TO BE DETERMINED |
| Boring Length | 2300 mm | Machine Weight | 800 kg |
| Overall Dimension | 6000*1500*1800 mm | Boring Diameter | 45-80 mm |
| Payment Terms | L/C,T/T | Supply Ability | 3 sets per season |
| Motor Power | 1.5 kW | Spindle Speed | 230 r/min |
| Brand Name | Xinmeiteng | Certification | CE |
| Model Number | TDP-52 | Place of Origin | Qingdao |
| High Light | 230 r/min Boring Spindle ,45-80 mm Hole Diameter ,Adjustable Foam Boring | ||
The TDP-52 is a horizontal cylinder foam boring machine with a 230 r/min main shaft. Hole diameter is adjustable from 45 mm to 80 mm, boring length is 2300 mm, motor power is 1.5 kW, machine weight is 800 kg and overall dimension is 6000*1500*1800 mm. The machine is CE certified.
The hole has to match the shaft. A mandrel that is loose in an oversize bore lets the block rock while it is peeled, and an undersize bore will not take the shaft at all. Shafts are not standard across a plant, so the machine has to cover the range without a second unit.
The TDP-52 covers 45-80 mm with interchangeable cutter heads and holds a 230 r/min spindle speed through the cut. That combination keeps the bore round and the wall clean across the whole range, including at the larger head sizes where a slower spindle would tear the foam.
Cutter heads cover the shaft sizes used in cylinder foam lines.
A steady cut that keeps the bore round at the larger head sizes.
A head change covers the range without a second machine.
The head is carried through a full block in one pass.
Keep one head per shaft size and label it. Mixing heads between batches is the most common reason two blocks from the same order bore differently.
Foam does not cut like wood. The cutter shears the cell structure, so the wall finish depends on spindle speed and feed rate working together. At 230 r/min with a matched feed, the wall comes out clean; slow the spindle and the cutter starts to tear instead of shear.
Hole diameter is a head question, not a spindle question. Each head is set for a shaft size, so the tolerance is held by the head and the operator only has to seat it properly and keep it sharp.
The third factor is clamping. Foam is soft enough that a badly clamped block deforms under the cutter, which shows up as an oval hole. Squaring the block against the stop is what keeps the bore round.
| Parameter | Value |
|---|---|
| Model | TDP-52 |
| Machine type | Horizontal cylinder foam boring machine |
| Boring diameter | 45-80 mm |
| Boring length | Max 2300 mm |
| Main shaft speed | 230 r/min |
| Motor power | 1.5 kW |
| Machine weight | 800 kg |
| Overall dimension | 6000*1500*1800 mm |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Bore runs off centre | Block not clamped square to the spindle | Re-clamp the block and check the centre line |
| Hole diameter oversize | Worn cutter head or feed too fast | Fit a new head and reset the feed speed |
| Torn bore wall | Feed rate too high for the foam density | Reduce the feed and check cutter sharpness |
| Spindle vibration | Worn bearing or loose drive belt | Replace the bearing and re-tension the belt |
The machine travels in an export-grade wooden case with the electrics protected and the cutter or blade assembly braced separately. Machine weight is 800 kg and the overall dimension is 6000*1500*1800 mm, so the unit is quoted against a 20ft or 40ft container depending on the line it ships with.
A packing list, wiring diagram, operation manual and CE declaration travel with every unit. Delivery is 45 working days after downpayment; installation and commissioning support is available remotely or on site.
A: 230 r/min, matched to the feed rate to shear the foam cleanly.
A: By fitting the cutter head for the required shaft size across the 45-80 mm range.
A: 45-80 mm with the standard cutter heads; the head is changed to suit the shaft diameter.
A: 45 working days after downpayment, with installation and commissioning support available.
Tell us the block diameter, the required hole diameter and the boring length you need. We will confirm the TDP-52 configuration, quote the machine and share the delivery schedule. Cutter heads, guide parts and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!