| Stirring Volume | 15 m³ |
| Payment Terms | T/T,L/C |
| Delivery Time | 45 working days after downpayment |
| Motor Power | 33 kW |
| Machine Weight | 8000 kg |
| Supply Ability | 3 Sets per Season |
| Stirring Rate | 40 r/min |
| Packaging Details | TO BE DETERMINED |
| Foaming Size | 2100x1800x1000 mm |
| Productive Capacity | 3 blocks/h |
| Place of Origin | Qingdao, China |
| Brand Name | Xinmeiteng |
| Certification | CE |
| Model Number | TDP-10 |
View Detail Information
Explore similar products
Bonding and steam press molding Regenerative Foam Rebonded Equipment Tripple
Cylinder Type Rebonded Foam Machine with 15m2 Mixing Tank and 50-300kg/m3
15 t Frame Rebond Block Foaming Machine with 33.5 kW Motor and 4 blocks/h Output
15T Rebond Block Foam Foaming Machine with 33.5kW Motor Power for 4 Blocks/h
Product Specification
| Stirring Volume | 15 m³ | Payment Terms | T/T,L/C |
| Delivery Time | 45 working days after downpayment | Motor Power | 33 kW |
| Machine Weight | 8000 kg | Supply Ability | 3 Sets per Season |
| Stirring Rate | 40 r/min | Packaging Details | TO BE DETERMINED |
| Foaming Size | 2100x1800x1000 mm | Productive Capacity | 3 blocks/h |
| Place of Origin | Qingdao, China | Brand Name | Xinmeiteng |
| Certification | CE | Model Number | TDP-10 |
| High Light | TDP-10 Rebonded Foam Making Line ,Waste Sponge Rebonded Foam Line ,2100x1800x1000 mm Rebonded Foam Mould | ||
TDP-10 Rebonded Foam Making Line 2100x1800x1000 mm Mould 3 Blocks per Hour for Waste Sponge
Product Introduction
The TDP-10 rebonded foam making line converts crushed PU sponge scrap into dense, uniform rebonded foam blocks. Waste foam is shredded, blended with binder in a 15 m³ stirring chamber, pressed into a 2100 x 1800 x 1000 mm mould and cured either by steam or by natural air drying. Each cycle produces a block that can be cut, laminated or profiled into mats, underlay and cushioning products — meaning scrap that used to be sold by weight can be reprocessed into finished material with a much higher margin.
The line runs at 3 blocks per hour with a 33 kW drive package and a total machine weight of 8000 kg. Because both steam curing and natural drying are supported, the same line can be installed in workshops with an existing boiler or in plants that prefer a low-energy air-dry process.


| Item | Parameter |
|---|---|
| Stirring volume | 15 m³ |
| Foaming size (L x W x H) | 2100 x 1800 x 1000 mm |
| Stirring rate | 40 r/min |
| Productive capacity | 3 blocks (moulds) per hour |
| Motor power | 33 kW |
| Machine weight | 8000 kg |
| Overall dimension (L x W x H) | 4000 x 4000 x 5400 mm |
The TDP-10 is normally the centre of a small recycling plant. Depending on how much automation you need, it can be paired with:

The line processes crushed flexible PU foam, memory foam scrap, mattress trim, packaging foam off-cuts and mixed sponge waste. Rebonded block density is controlled by press ratio and binder content rather than by the input foam alone, so the same scrap stream can be run to different densities for different end products — lighter blocks for cushioning and underlay, denser blocks for gym mats, carpet backing and load-bearing padding.
Foam chips should be dry and free of metal, wood or fabric contamination before mixing, since hard inclusions show up as weak points in the finished block.

The line ships with foundation and layout drawings, wiring diagrams and an operation manual. Installation typically takes a few days with local rigging, followed by commissioning support for mixing ratio, cycle timing and first block quality.
Routine maintenance covers stirring shaft and blade inspection, mould guide lubrication, steam line and valve checks, and control panel cleaning. Wear parts such as mixing blades, seals and mould liners are stocked for fast replacement so a single worn component does not idle the line.
Each unit is run and inspected before shipment, with CE electrical configuration available for European and other export markets. The main frame is shipped in containers with rust-proof treatment, while the control cabinet, motors and small components are packed in wooden cases. Standard delivery is about 45 working days after downpayment, and packing details are confirmed against the final configuration.

Crushed flexible PU foam, memory foam scrap, mattress trim, packaging foam off-cuts and mixed sponge waste, provided it is dry and free of hard contamination.
About 3 blocks per hour with a 2100 x 1800 x 1000 mm mould, giving roughly 24 blocks per single shift.
Only for steam curing. The line also supports natural air drying, which needs more curing space but no boiler.
By press ratio and binder content, so different densities can be produced from the same scrap stream.
A foam shredder and a cutting machine — shredding determines mix quality and cutting converts cured blocks into sellable sheets and mats.
33 kW for the line itself, machine footprint 4000 x 4000 x 5400 mm, plus space for moulds, curing and block storage.
About 45 working days after downpayment, depending on configuration and destination.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!