| Power Supply | 380 V, customizable |
| Motor Power | 7.5 kW |
| Overall Dimension | 1300*1120*3000 mm |
| Payment Terms | L/C,T/T |
| Supply Ability | 3 sets per season |
| Delivery Time | 45 working days after downpayment |
| Machine Weight | 2500 kg |
| Maximum Foam Size | 900*700*1000 mm |
| Maximum Stroke | 800 mm |
| Packaging Details | TO BE DETERMINED |
| Place of Origin | Qingdao |
| Certification | CE |
| Brand Name | Xinmeiteng |
| Model Number | TDB-01 |
View Detail Information
Explore similar products
Vertical PU Foam Baler Hydraulic Baling Machine High Stability
Hydraulic Foam Baler Sponge Bale Press Machine Vertical Automatic
Vertical Hydraulic Foam Compress Baler For Waste Recycled Sponge EVA PE
China Factory Heavy Duty Hydraulic Baler Waste Recycled Foam Sponge Clothes
Product Specification
| Power Supply | 380 V, customizable | Motor Power | 7.5 kW |
| Overall Dimension | 1300*1120*3000 mm | Payment Terms | L/C,T/T |
| Supply Ability | 3 sets per season | Delivery Time | 45 working days after downpayment |
| Machine Weight | 2500 kg | Maximum Foam Size | 900*700*1000 mm |
| Maximum Stroke | 800 mm | Packaging Details | TO BE DETERMINED |
| Place of Origin | Qingdao | Certification | CE |
| Brand Name | Xinmeiteng | Model Number | TDB-01 |
| High Light | 900x700x1000 mm Foam Bale ,Waste Sponge Compression ,Foam Baler Shipping Volume | ||
The TDB-01 is a vertical hydraulic baler that compresses waste sponge into bales up to 900*700*1000 mm. Maximum stroke is 800 mm, motor power is 7.5 kW, the machine weighs 2500 kg and the overall footprint is 1300*1120*3000 mm. It is CE certified.
Loose foam offcuts are mostly air, and every truck that leaves the plant carries that air. Baling changes the economics: the same container holds several times the weight, the bales stack square, and waste leaves as a sellable commodity instead of a disposal cost.
A consistent bale size, so bales stack and load without gaps.
Enough travel to compress a full chamber of offcuts into one bale.
Runs on a standard workshop supply without a dedicated power upgrade.
Tie the bale at full pressure, not after the plate starts to release. A bale tied loose expands in the container and loses the volume advantage that justified baling it.
Foam offcuts have a low bulk density. A truck loaded with loose offcuts hits its volume limit long before its weight limit, so most of what is being paid for is air. Baling changes that ratio, and the freight saving is usually the fastest payback on the machine.
The bale size matters as much as the compression. A consistent 900*700*1000 mm bale stacks without gaps, which means a container or a store can be filled properly. Bales of varying size waste the space that the baler was bought to save.
Baled foam is also easier to sell. A recycler buying loose offcuts has to handle them twice, and that cost comes off the price. A bale that can be weighed and stacked is a commodity, and it is priced as one.
| Parameter | Value |
|---|---|
| Model | TDB-01 |
| Machine type | Vertical hydraulic baler |
| Maximum foam size | 900*700*1000 mm |
| Maximum stroke | 800 mm |
| Motor power | 7.5 kW |
| Overall dimension | 1300*1120*3000 mm |
| Machine weight | 2500 kg |
| Power supply | 380 V, customizable |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Bale comes out loose | Hydraulic pressure low or oil temperature high | Check pressure setting and oil temperature, top up the oil |
| Press plate stops short of the stroke | Limit switch set wrong or cylinder seal leaking | Reset the limit switch, check the cylinder seal |
| Pressure drops while holding | Worn seals in the valve block or cylinder | Replace the seals and re-test the hold pressure |
| Press plate rises unevenly | Air in the hydraulic circuit | Bleed the circuit and check the oil level |
| Motor overheats on long runs | Too many cycles without a cooling break | Space the cycles and check the oil cooler |
| Bale ties come loose in the bale | Insufficient compression before tying | Compress to full stroke before tying the bale |
Baler faults are hydraulic before they are mechanical. Check oil level, oil temperature and pressure first, because a loose bale or a short stroke is usually pressure and not the frame.
Never reach into the chamber while the press plate is moving. The vertical baler is a press, and a hand in the chamber is the one mistake that cannot be corrected.
Keep the bales clear of the machine as they come out. A stacked bale falling from a leaning pile is the usual injury on a baling operation, not the press itself.
Hydraulic oil is the item that decides how long the baler works. Check the level and the temperature at the start of a shift, and change the oil on the schedule rather than when a bale comes out loose.
Check the seals and the hoses monthly. A slow leak shows up as a pressure drop while holding, which produces a loose bale long before anything looks broken.
The baler ships in export packing as one unit at 2500 kg, with the hydraulic unit protected. Confirm the forklift capacity at both ends and the door height against the 3000 mm overall height.
Delivery is 45 working days after downpayment, payment by T/T or L/C, minimum order one set. Hydraulic oil is supplied to the local specification, and commissioning guidance ships with the machine.
A: Up to 900*700*1000 mm, held consistent bale to bale.
A: 800 mm maximum stroke on a 7.5 kW hydraulic drive.
A: A 1300*1120 mm footprint, 3000 mm tall.
A: Baling removes the air, so freight and storage cost per tonne drop.
A: 45 working days after downpayment, T/T or L/C, minimum order one set.
Tell us the foam type, block or roll size, target sheet thickness and expected output per shift. We will confirm the machine configuration, quote it and share the delivery schedule. Spare blades, guide parts and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!