| Delivery Time | 45 working days after downpayment |
| Cutting Speed | 0-50 m/min |
| Motor Power | 17.84 kW |
| Cutting Size | 3000*2000 mm |
| Machine Weight | 3500 kg |
| Payment Terms | L/C,T/T |
| Supply Ability | 3 sets per season |
| Cutting Height | 1300 mm |
| Cutting Thickness | 2-300 mm |
| Packaging Details | TO BE DETERMINED |
| Place of Origin | Qingdao |
| Model Number | TDSA-2150 |
| Certification | CE |
| Brand Name | Xinmeiteng |
View Detail Information
Explore similar products
Auto Pu Foam Cutting Machine cylinder foam round peeling auto roll up Machine
Affordable Horizontal Foam Splitter Cutting Machine For Budget-friendly
High Speed High Precision Pu Foam Cutting Machine Horizontal
C-618 Cutting-edge Carousel horizontal splitting machine (with pressure roller)
Product Specification
| Delivery Time | 45 working days after downpayment | Cutting Speed | 0-50 m/min |
| Motor Power | 17.84 kW | Cutting Size | 3000*2000 mm |
| Machine Weight | 3500 kg | Payment Terms | L/C,T/T |
| Supply Ability | 3 sets per season | Cutting Height | 1300 mm |
| Cutting Thickness | 2-300 mm | Packaging Details | TO BE DETERMINED |
| Place of Origin | Qingdao | Model Number | TDSA-2150 |
| Certification | CE | Brand Name | Xinmeiteng |
| High Light | 3000*2000 mm Cutting Size ,Horizontal Foam Slicer ,PU Block Splitting Machine | ||
The TDSA-2150 is a horizontal foam slicer with a soft belt conveyor table. Cutting size is 3000*2000 mm, cutting height is 1300 mm, thickness range is 2-300 mm, cutting speed is 0-50 m/min, motor power is 17.84 kW and machine weight is 3500 kg. The machine is CE certified.
Table size decides how many times a block is handled. A small table forces the operator to cut the block down before slicing, which costs a sheet, a set-up and a pair of hands. The TDSA-2150 carries a 3000*2000 mm table, so a block from the foaming line is loaded once and sliced through.
The 1300 mm cutting height is the second half of that. A tall block on a short machine has to be split twice, and every second set-up is a new chance to lose alignment. With the height and table matched, the block is squared once and the whole block is converted into sheets in one pass sequence.
A full block loads without pre-cutting or re-clamping.
Tall blocks are sliced in one set-up rather than two.
Thin mattress sheets and thick cushion slabs from one machine.
Feed rate is trimmed to the foam density being cut.
Check the square of the first sheet against the block face. If the first sheet is tapered, the block was not squared against the blade, and every sheet after it inherits the error.
Every extra set-up on a block costs a sheet. When a table is too small, the operator squares the block with a hand knife, loses a slice to the saw kerf, and re-clamps before the real slicing starts. On a 3000*2000 mm table that step disappears, and the material saved on a few blocks a week pays for the size difference.
Handling is the second gain. A block that fits the table can be fed on the soft belt rather than lifted onto a bench, which is what keeps a two-person crew able to run the slicer alongside a peeler.
The third gain is consistency. A block squared once keeps its reference face through every sheet, so thickness drift across a long block stays inside tolerance instead of being reset at each re-clamp.
| Parameter | Value |
|---|---|
| Model | TDSA-2150 |
| Machine type | Horizontal foam slicer with soft belt conveyor |
| Cutting size | 3000*2000 mm |
| Cutting height | 1300 mm |
| Cutting thickness | 2-300 mm |
| Cutting speed | 0-50 m/min |
| Motor power | 17.84 kW |
| Machine weight | 3500 kg |
| Overall dimension | 7000*4500*2500 mm |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Sheet thickness varies across the width | Band knife tension or guide wear | Re-tension the blade and check the guides |
| Foam slipping during the cut | Vacuum or conveyor grip too low for the block density | Raise the suction and check the belt surface |
| Wavy cut face | Feed speed too high for the foam | Reduce the feed rate and re-check blade sharpness |
| Blade drifting off line | Worn wheel or misaligned tracking | Re-track the blade and replace worn wheels |
The machine travels in an export-grade wooden case with the electrics protected and the cutter or blade assembly braced separately. Machine weight is 3500 kg and the overall dimension is 7000*4500*2500 mm, so the unit is quoted against a 20ft or 40ft container depending on the line it ships with.
A packing list, wiring diagram, operation manual and CE declaration travel with every unit. Delivery is 45 working days after downpayment; installation and commissioning support is available remotely or on site.
A: Up to 3000*2000 mm with a 1300 mm cutting height, loaded straight onto the soft belt table.
A: Flexible PU foam blocks from low density packaging foam to denser mattress and furniture foam.
A: On the touch screen; the table reciprocates automatically to the set thickness.
A: 45 working days after downpayment, with installation and commissioning support available.
Tell us the block size, the sheet thickness range and the foam density you cut. We will confirm the TDSA-2150 configuration, quote the machine and share the delivery schedule. Band knives, guide wheels and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!