China factories

Chat Now Send Email
China factory - Qingdao Xinmeiteng Sponge Manufacture Co.

Qingdao Xinmeiteng Sponge Manufacture Co.

  • China,Qingdao ,Shandong
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed
China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed

  1. China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed
  2. China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed
  3. China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed
  4. China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed
  5. China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed
  6. China 15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed

15-200 kg/m³ Cross Cutting Machine and Foam Cross Cutter with 1-20 m/min Speed

  1. MOQ: 1 Set
  2. Price: Inquiry
  3. Get Latest Price
Cutting Thickness 1-100 mm
Packaging Details TO BE DETERMINED
Total Motor Power 10 kW
Overall Dimension 6424*4600*2786 mm
Delivery Time 45 working days after downpayment
Cutting Width 1000-2000 mm
Supply Ability 3 sets per season
Cutting Speed 1-20 m/min
Cutting Density 15-200 kg/m³
Payment Terms L/C,T/T
Place of Origin Qingdao
Certification CE
Brand Name Xinmeiteng
Model Number TDP-02

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Cutting Thickness 1-100 mm Packaging Details TO BE DETERMINED
Total Motor Power 10 kW Overall Dimension 6424*4600*2786 mm
Delivery Time 45 working days after downpayment Cutting Width 1000-2000 mm
Supply Ability 3 sets per season Cutting Speed 1-20 m/min
Cutting Density 15-200 kg/m³ Payment Terms L/C,T/T
Place of Origin Qingdao Certification CE
Brand Name Xinmeiteng Model Number TDP-02
High Light 15-200 kg/m3 Density Cutting ,Automatic Foam Cross Cutting ,Soft and Rigid Foam Trimming
TDP-02 Cross Cutting Machine for 15-200 kg/m3 Foam

The TDP-02 cross cuts and edge trims PU foam across a density range of 15-200 kg/m³. Cutting thickness is 1-100 mm, width is 1000-2000 mm, feed speed is 1-20 m/min, motor power is 10 kW and the machine weighs 5000 kg. It is CE certified.

Soft and firm foam behave like different materials on the same blade. A 15 kg/m³ block compresses if it is fed too fast and tears at the edge; a 200 kg/m³ block loads the motor and can stall a light machine. A density range of 15-200 kg/m³ on a 10 kW drive covers both ends with one setting table.

TDP-02 edge trimming machine trimming a PU foam block
TDP-02 edge trimming machine trimming a PU foam block.
The Machine at a Glance

15-200 kg/m³ range

Soft packaging foam and firm high density grades run on the same machine.

1-20 m/min feed

Speed is set per density instead of being fixed.

10 kW drive

Holds feed speed through a 200 kg/m³ cut without stalling.

  • Model: TDP-02
  • Thickness: 1-100 mm
  • Width: 1000-2000 mm
  • Speed: 1-20 m/min
  • Density: 15-200 kg/m³
  • Motor power: 10 kW
  • Weight: 5000 kg
TDP-02 PU foam trimming machine overall view
TDP-02 PU foam trimming machine overall view.
TDP-02 cross cutting head and drive unit
TDP-02 cross cutting head and drive unit.
Setting the Machine for a Density
  1. Check the density. Confirm the block is inside the 15-200 kg/m³ range.
  2. Set the feed. Start slow inside 1-20 m/min and raise it until the edge is clean.
  3. Set the thickness. Set 1-100 mm and check on the first cut.
  4. Trim the first edge. Watch the cut face for tearing or a stepped edge.
  5. Run the second edge and cross cut. Keep the same feed for the whole block.
  6. Record the setting. Note feed and thickness per density for repeat orders.

On soft foam the limit is tearing, and on dense foam it is motor load. Both are found by starting slow and increasing until the cut face is clean or the drive starts working hard, then backing off one step.

One Machine Across the Density Range

Density changes the physics of the cut more than thickness does. At 15 kg/m³ the foam is mostly air, the blade meets little resistance, and the risk is that the feed runs ahead of the blade and tears the cell structure at the edge. At 200 kg/m³ the blade meets real resistance and the machine has to hold feed speed against it.

That is why the feed range is 1-20 m/min rather than a single speed. The operator sets the machine to the block in front of them: fast on soft foam where the blade cuts easily, slow on dense foam where the drive is working. The 10 kW motor is sized for the dense end.

The practical result is fewer changeovers. A converter running a soft packaging block in the morning and a firm mattress core in the afternoon uses the same machine, the same blade and the same table, and changes only the feed setting.

  • Soft foam: watch for tearing at the edge, not for motor load.
  • Dense foam: watch the drive and slow the feed before it stalls.
  • Record settings: a noted feed per grade turns a judgement call into a repeatable number.
Set feed by density, not by habit. A feed that gives a clean edge on 200 kg/m³ will tear a 15 kg/m³ block at the same setting.
TDP-02 trimming blade and clamp unit detail
TDP-02 trimming blade and clamp unit detail.
Technical Parameters
Parameter Value
Model TDP-02
Cutting thickness 1-100 mm
Cutting width 1000-2000 mm
Cutting speed 1-20 m/min
Cutting density 15-200 kg/m³
Total motor power 10 kW
Machine weight 5000 kg
Overall dimension 6424*4600*2786 mm
Certification CE
Core Advantages
  • Wide density range: 15-200 kg/m³ covers soft PU through firm high density foam.
  • Feed matched to density: 1-20 m/min, with slower feeds for dense blocks.
  • 10 kW drive: power to keep the feed constant on the densest grades.
  • 1-100 mm thickness: the same head cuts thin sheets and thick slices.
  • 1000-2000 mm width: narrow and full width blocks on one table.
  • Trimming and cross cutting: both operations without moving the block.
  • CE certified: export-ready guarding and electrics.
Primary Applications
  • Soft packaging foam: low density blocks trimmed without tearing.
  • High density foam: firm grades cross cut at a reduced feed.
  • Mattress blocks: density range from soft comfort layers to firm cores.
  • Furniture foam: mixed density blocks on one machine.
  • Acoustic foam: soft grades trimmed square.
  • Foam conversion: mixed orders run back to back.
TDP-02 automatic foam edge trimmer in a foam plant
TDP-02 automatic foam edge trimmer in a foam plant.
TDP-02 edge trimming and cross cutting machine side view
TDP-02 edge trimming and cross cutting machine side view.
TDP-02 cross cutting a foam block to thickness
TDP-02 cross cutting a foam block to thickness.
Trimming Faults and Their Causes
Symptom Likely cause Action
Thickness differs at the two ends of a slice Trimming head flexing or block not square Trim a reference edge first, then check head guide clearance
Torn edge on soft foam Feed too fast for the density Reduce feed inside 1-20 m/min and check the blade edge
Blade stalls on dense foam Feed too high for 200 kg/m3 grades Lower the feed and let the 10 kW drive recover speed
Block slips during the cross cut Feed belt glazed or clamp pressure low Clean the belt and check the clamp pressure
Trimmed width drifts along the block Side guide creeping under load Re-lock the side guide and check the rail
Stepped or wavy cut face Blade tension or blade weld worn Re-tension the blade and inspect the weld

Most trimming faults come from the block or the feed, not the blade. Square one edge first, set the feed for the density, and measure the first slice at both ends before the production run.

Operation, Safety and Block Feed

Dense blocks are heavy and the machine pulls them through under power. Keep hands behind the infeed line, and never try to straighten a block by hand once the feed has engaged.

Soft blocks need support as much as control. A low density block that is unsupported at the outfeed will sag and the trimmed edge will follow the sag.

  • Feed support: infeed and outfeed level with the table.
  • Hands clear: behind the infeed line once the feed is engaged.
  • Density noted: feed set per grade before the run starts.
  • Guarding: guard fitted, interlocks working.
TDP-02 trimmed foam block coming off the machine
TDP-02 trimmed foam block coming off the machine.
Blade Care and Daily Maintenance

Dense foam wears the blade faster than soft foam. If the plant runs 200 kg/m³ grades regularly, check the blade edge more often than the standard shift check suggests, because a dull blade on dense foam shows up as a stepped cut face.

Clean the feed belt and the table between grades. Dust from a soft block on the belt reduces grip for the next dense block, and the feed slips without any change to the setting.

  • Every shift: blade edge, feed belt, table cleanliness.
  • Weekly: blade tension, guide rails, drive belt.
  • Monthly: lubrication, thickness calibration, motor current check.
  • Between grades: clean the belt and table, re-check the feed setting.
TDP-02 foam block loaded on the trimming table
TDP-02 foam block loaded on the trimming table.
Packaging and Delivery

The machine ships in export packing with the trimming head blocked and the guides protected. At 5000 kg and 6424*4600*2786 mm overall, confirm the container plan and the receiving access before booking freight.

Delivery is 45 working days after downpayment, payment by T/T or L/C, minimum order one set. Installation guidance and spare blades ship with the machine.

TDP-02 foam edge trimming machine prepared for shipment
TDP-02 foam edge trimming machine prepared for shipment.
Frequently Asked Questions
Q1: What density range can it cut?

A: 15-200 kg/m³, with the feed set for the grade.

Q2: What feed speed?

A: 1-20 m/min, slower for dense foam.

Q3: What thickness and width?

A: 1-100 mm thickness and 1000-2000 mm width.

Q4: What drive power?

A: 10 kW, sized for the 200 kg/m³ end of the range.

Q5: What are the terms?

A: 45 working days after downpayment, T/T or L/C, minimum order one set.

Send Your Cutting Requirement

Tell us the foam type, block or roll size, target sheet thickness and expected output per shift. We will confirm the machine configuration, quote it and share the delivery schedule. Spare blades, guide parts and remote commissioning support are available with every order.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2002

  • Total Annual:

    1500000-3000000

  • Employee Number:

    50~200

  • Ecer Certification:

    Verified Supplier

XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...

+ Read More

Get in touch with us

  • Reach Us
  • Qingdao Xinmeiteng Sponge Manufacture Co.
  • Southeast of No.1180 Jingkou Industrial Park, Jingkou Community, Chengyang District, Qingdao City, Shandong Province
  • https://www.foamcutting-machines.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement