| Payment Terms | L/C,T/T |
| Motor Power | 8 kW |
| Machine Weight | 3000 kg |
| Packaging Details | TO BE DETERMINED |
| Laminating Speed | 10-50 m/min |
| Overall Dimension | 7800*2200*2000 mm |
| Laminating Method | Cold laminating (no heating) |
| Supply Ability | 3 sets per season |
| Laminating Width | 2000-2200 mm |
| Delivery Time | 45 working days after downpayment |
| Brand Name | Xinmeiteng |
| Certification | CE |
| Model Number | TDL-2200 |
| Place of Origin | Qingdao |
View Detail Information
Explore similar products
CE Foam Lamination Machine 2200mm Mesh Belt Laminating Machine
PE Eva Sheet Lamination Machine 2000 Cold Bonding Epe Foam Lamination Machine
EVA PE Foam Lamination Machine 2000mm Cold Bonding Foam Laminators
Spong Fabric Leather Mesh EPE Foam Sheet Bonding Laminating Machine Combining
Product Specification
| Payment Terms | L/C,T/T | Motor Power | 8 kW |
| Machine Weight | 3000 kg | Packaging Details | TO BE DETERMINED |
| Laminating Speed | 10-50 m/min | Overall Dimension | 7800*2200*2000 mm |
| Laminating Method | Cold laminating (no heating) | Supply Ability | 3 sets per season |
| Laminating Width | 2000-2200 mm | Delivery Time | 45 working days after downpayment |
| Brand Name | Xinmeiteng | Certification | CE |
| Model Number | TDL-2200 | Place of Origin | Qingdao |
| High Light | Energy Saving Laminating Machine ,Cold Lamination No Heat ,Foam Laminating 10-50 m/min | ||
The TDL-2200 is a cold laminating machine for foam. Laminating width is 2000-2200 mm, laminating speed is 10-50 m/min, laminating method is cold with no heating, motor power is 8 kW, machine weight is 3000 kg and the overall dimension is 7800*2200*2000 mm. The machine is CE certified.
Heated lamination carries running costs that never appear on the machine quotation: the oven, the gas or electric heat, the warm-up time before the first sheet, and the cooling space after the line. A cold process removes all four, and for foam that is laminated with cold glue there is no quality reason to keep them.
No heating, no warm-up and no cooling section.
Low connected load for a 2.2 m wide line.
Speed set to the glue and the fabric, not to oven capacity.
Wide sheets laminated in one pass.
Set the glue film before the speed. A line running fast with too little glue produces a laminate that looks bonded and separates a day later.
A heated line spends energy before it produces anything. The oven has to reach temperature, the first sheets run through and the laminated material needs cooling space before it can be stacked. On a short run, that warm-up and cool-down can take longer than the production itself.
Cold lamination removes those steps for foam bonded with cold glue. The line starts from cold, runs at the speed the glue allows, and the sheet can be wound or stacked straight away because there is no heat to dissipate.
The connected load reflects that. An 8 kW motor on a 2200 mm wide line is a fraction of what a heated laminator draws, and on a site where power capacity is already committed to cutting and foaming equipment, that difference decides whether the machine can be installed at all.
| Parameter | Value |
|---|---|
| Model | TDL-2200 |
| Machine type | Cold laminating machine |
| Laminating width | 2000-2200 mm |
| Laminating speed | 10-50 m/min |
| Laminating method | Cold laminating (no heating) |
| Motor power | 8 kW |
| Machine weight | 3000 kg |
| Overall dimension | 7800*2200*2000 mm |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Bubbles under the laminate | Glue spread uneven or roller pressure low | Adjust the glue gap and increase roller pressure |
| Wrinkles along the edge | Web tension uneven across the width | Balance the tension and check the edge guide |
| Delamination after curing | Wrong glue ratio or dusty foam surface | Check the glue mix and clean the surface |
| Sheet drifts off line | Edge guide misaligned | Adjust the edge guide and re-run |
| Roller marks on the face | Roller dirty or worn | Clean or replace the roller |
| Motor overloads | Roller pressure too high or speed too high | Reduce pressure and speed to the spec |
Lamination faults are usually tension and pressure faults, not glue faults. Check the roller pressure, the web tension and the edge guide before changing the glue mix.
Keep hands away from the laminating nip. Cold lamination still draws material into the rollers, and the nip is the point where gloves and sleeves are caught.
Stop the line before clearing a wrinkle at the roller. Reaching into a running nip is the main injury risk on any laminator.
The glue unit and the rollers are the parts that need attention. Clean the glue unit at the end of each shift and check the rollers for build-up, because a dirty roller leaves marks that cannot be removed later.
The edge guide and the web tension need a weekly check. A guide that has moved produces edge wrinkles, which look like a glue problem but are a guiding problem.
The machine ships in a reinforced export crate with the frame, rollers and glue unit braced for transport. The crate covers the 7800*2200*2000 mm envelope.
The shipment includes the glue system specification, layout drawing and a commissioning checklist, with remote support during installation.
A: No, it is a cold laminating machine with no heating section.
A: 2000-2200 mm in a single pass.
A: 10-50 m/min, set by the glue and facing material.
A: An 8 kW motor on a 2200 mm wide line.
Tell us the foam and facing material, the sheet width, the glue system you use and the line speed you need. We will confirm the machine configuration, quote it and share the delivery schedule. Rollers, glue units and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!