China factories

Chat Now Send Email
China factory - Qingdao Xinmeiteng Sponge Manufacture Co.

Qingdao Xinmeiteng Sponge Manufacture Co.

  • China,Qingdao ,Shandong
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output
China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output

  1. China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output
  2. China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output
  3. China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output
  4. China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output
  5. China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output
  6. China ±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output

±5 kg/m³ Rebond Foam Machine with 15 m³ Tank and 4 Blocks/h Output

  1. MOQ: 1 Set
  2. Price: Inquiry
  3. Get Latest Price
Production Capacity 4 blocks/h
Payment Terms L/C,T/T
Machine Weight 15 t
Supply Ability 3 sets per season
Motor Power 33.5 kW
Packaging Details TO BE DETERMINED
Density Range ≤120 kg/m³
Density Tolerance ±5 kg/m³
Mixing Tank Volume 15 m³
Delivery Time 45 working days after downpayment
Certification CE
Model Number C619
Place of Origin Qingdao
Brand Name Xinmeiteng

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Production Capacity 4 blocks/h Payment Terms L/C,T/T
Machine Weight 15 t Supply Ability 3 sets per season
Motor Power 33.5 kW Packaging Details TO BE DETERMINED
Density Range ≤120 kg/m³ Density Tolerance ±5 kg/m³
Mixing Tank Volume 15 m³ Delivery Time 45 working days after downpayment
Certification CE Model Number C619
Place of Origin Qingdao Brand Name Xinmeiteng
High Light ±5 kg/m3 Density Control ,120 kg/m3 Rebond Block ,Uniform Density Foam Block
C619 Rebond Foam Machine for Density Within ±5 kg/m3

The C619 is a rebond block foaming machine that holds block density within ±5 kg/m³ up to 120 kg/m³. The mixing tank is 15 m³, the foaming tank is supplied in two customized dimensions, output is 4 blocks per hour on a 33.5 kW drive, and the machine weighs 15 t. It is CE certified.

A rebond block is sold on density. The customer orders 80 kg/m³, cuts it into mat or sheet, and measures again; if the block is 75 at one end and 88 at the other, the order is rejected even though the average looks right. Density tolerance is the number that decides whether a rebond line is sellable.

C619 rebond block foam foaming machine production line
C619 rebond block foam foaming machine production line.
The Machine at a Glance

±5 kg/m³ tolerance

Blocks hold density across the height, so cut parts stay within the order.

Up to 120 kg/m³

Covers the standard rebond range used for mat, carpet underlay and cushioning.

15 m³ mixing tank

Batch size large enough to keep a 4 blocks/h line fed.

  • Model: C619
  • Mixing tank: 15 m³
  • Capacity: 4 blocks/h
  • Density: ≤120 kg/m³
  • Tolerance: ±5 kg/m³
  • Motor power: 33.5 kW
  • Weight: 15 t
C619 rebond foam line control cabinet and PLC
C619 rebond foam line control cabinet and PLC.
C619 rebond block foaming machine on the factory floor
C619 rebond block foaming machine on the factory floor.
Holding Density Block After Block
  1. Weigh the granule. Charge the granule to the batch weight; the scale is the first control.
  2. Dose the binder. Add binder by weight for the target density, not by eye.
  3. Mix in the 15 m³ tank. Run the full mixing time so the binder is distributed through the batch.
  4. Fill the foaming tank. Transfer to the mould with the tank dimension set for the block order.
  5. Cure and demould. Allow the full cure time before the block is handled.
  6. Weigh and record. Weigh each block and record the density against the order.

Record the block weight, not only the setting. A block that is 3 kg heavy on a 120 kg/m³ order is a density error that shows up when the customer cuts it, and the record is what tells you the dosing has drifted.

Where Density Error Comes From

Rebond density is set by the ratio of granule to binder and by how evenly that binder is spread. Two batches can have the same total weight and still produce different blocks if the mixing time is short and the binder sits in pockets.

The 15 m³ tank is what makes even distribution possible at this output. A small tank forces short mixes to keep up with 4 blocks per hour, and short mixes are exactly where density variation comes from.

Cure time is the second control. A block that is demoulded early compresses under its own weight and comes out denser at the bottom than at the top, which reads as a density tolerance failure even though the recipe was correct.

  • Weigh both components: granule and binder, every batch.
  • Mix the full time: a 15 m³ batch needs its mixing time, not a shortened one.
  • Cure before handling: early demoulding shows up as a dense bottom.
Weigh every block and log it. Density drift is a slow trend, and the log catches it before a customer does.
C619 rebond block foam machine mixing unit detail
C619 mixing unit detail.
Technical Parameters
ParameterValue
ModelC619
Mixing tank volume15 m³
Foaming tank dimensionCustomized, two options
Production capacity4 blocks/h
Density range≤120 kg/m³
Density tolerance±5 kg/m³
Motor power33.5 kW
Machine weight15 t
CertificationCE
Core Advantages
  • Density held within ±5 kg/m³: the tolerance that matters when the block is cut and re-measured.
  • Range up to 120 kg/m³: covers mat, underlay and cushioning grades.
  • 15 m³ mixing tank: consistent binder distribution across a full batch.
  • 4 blocks per hour: output matched to a working cutting line downstream.
  • Two foaming tank options: block size specified to the market being served.
  • 33.5 kW drive: mixing power held through a full batch, not just at start-up.
  • CE certified: export-ready guarding and electrics.
Primary Applications
  • Gym mats: blocks cut into mat with a fixed density.
  • Carpet underlay: rebond blocks to a specified density.
  • Cushioning: blocks for seating and padding.
  • Packaging blocks: recycled foam blocks for protective packaging.
  • Insulation panels: blocks cut into panel.
  • Foam recycling: offcut and granule conversion into sellable blocks.
C619 rebond foam machine mixing tank and foaming tank
C619 rebond foam machine mixing tank and foaming tank.
C619 rebond block foam machine mixing unit detail
C619 rebond block foam machine mixing unit detail.
C619 rebond foam machine foaming tank and mould station
C619 foaming tank and mould station.
Rebond Foaming Faults and Their Causes
SymptomLikely causeAction
Block density varies from top to bottomMixing time too short or binder unevenly distributedExtend mixing time and check binder dosing
Block cracks while curingSteam or cure time too short for the densityIncrease cure time and check steam pressure
Density above the targetWeighing error on granule or binderCalibrate the scale and re-check the batch recipe
Output drops below 4 blocks/hTank changeover or mould handling is slowPlan the mould sequence and shorten changeover
Block rebounds poorlyBinder ratio low for the granule sizeRaise the binder ratio and test a block
Discharge blockedGranule build-up in the tank outletClean the outlet and check granule moisture

Rebond density problems are almost always dosing or mixing time. Weigh the granule and the binder, mix long enough for the batch size, and check one block from each shift rather than one block per week.

Operation, Safety and Batch Control

Binder dosing is the safety-critical step as well as the quality-critical one. Keep the dosing area ventilated, follow the binder supplier's handling instructions and keep the mixing area clear while a batch is running.

The foaming tank and mould station are hot and under pressure during cure. Keep the guarding in place and do not open a mould before the cure time has elapsed.

  • Batch sheet: granule weight, binder weight, mixing time, block weight.
  • Ventilation: dosing and mixing area ventilated per the binder data sheet.
  • Guarding: foaming tank and mould station guards in place.
  • Cure discipline: no demoulding before the specified cure time.
C619 rebond foam machine foaming tank and mould station
C619 foaming tank and mould station.
Blade Care and Daily Maintenance

Clean the mixing tank and the outlet on a fixed schedule. Binder residue in the tank changes the ratio of the next batch and granule build-up at the outlet reduces output.

Check the weighing system monthly against a known weight. A scale that is 1% out produces a density error that is invisible on the batch sheet but obvious in the finished block.

  • Every batch: tank and outlet condition, block weight logged.
  • Weekly: mixer blades, seals, binder pump.
  • Monthly: scale calibration, motor current, guard check.
  • Every block: weigh and record; check the trend weekly.
C619 rebond block foaming machine on the factory floor
C619 rebond block foaming machine on the factory floor.
Packaging and Delivery

The line ships in export packing in major assemblies, with the mixing tank, foaming tank and control cabinet packed separately. At 15 t total, plan the crane or forklift capacity and the container loading sequence before shipment.

Delivery is 45 working days after downpayment, payment by T/T or L/C, minimum order one set. Installation guidance, commissioning support and spare wear parts ship with the machine.

C619 rebond foam machine prepared for shipment
C619 rebond foam machine prepared for shipment.
Frequently Asked Questions
Q1: What density tolerance does it hold?

A: ±5 kg/m³, with blocks up to 120 kg/m³.

Q2: What is the mixing tank size?

A: 15 m³, sized to keep a 4 blocks/h line fed.

Q3: What output does it deliver?

A: 4 blocks per hour on a 33.5 kW drive.

Q4: Can block size be changed?

A: Yes, the foaming tank is supplied in two customized dimensions.

Q5: What are the terms?

A: 45 working days after downpayment, T/T or L/C, minimum order one set.

Send Your Cutting Requirement

Tell us the foam type, block or roll size, target sheet thickness and expected output per shift. We will confirm the machine configuration, quote it and share the delivery schedule. Spare blades, guide parts and remote commissioning support are available with every order.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2002

  • Total Annual:

    1500000-3000000

  • Employee Number:

    50~200

  • Ecer Certification:

    Verified Supplier

XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...

+ Read More

Get in touch with us

  • Reach Us
  • Qingdao Xinmeiteng Sponge Manufacture Co.
  • Southeast of No.1180 Jingkou Industrial Park, Jingkou Community, Chengyang District, Qingdao City, Shandong Province
  • https://www.foamcutting-machines.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement