| Cutting Size | 3000*2000 mm |
| Payment Terms | L/C,T/T |
| Machine Weight | 3500 kg |
| Overall Dimension | 7000*4500*2500 mm |
| Cutting Thickness | 2-300 mm |
| Delivery Time | 45 working days after downpayment |
| Supply Ability | 3 sets per season |
| Packaging Details | TO BE DETERMINED |
| Cutting Speed | 0-50 m/min |
| Motor Power | 17.84 kW |
| Place of Origin | Qingdao |
| Brand Name | Xinmeiteng |
| Model Number | TDSA-2150 |
| Certification | CE |
View Detail Information
Explore similar products
Auto Pu Foam Cutting Machine cylinder foam round peeling auto roll up Machine
Affordable Horizontal Foam Splitter Cutting Machine For Budget-friendly
High Speed High Precision Pu Foam Cutting Machine Horizontal
C-618 Cutting-edge Carousel horizontal splitting machine (with pressure roller)
Product Specification
| Cutting Size | 3000*2000 mm | Payment Terms | L/C,T/T |
| Machine Weight | 3500 kg | Overall Dimension | 7000*4500*2500 mm |
| Cutting Thickness | 2-300 mm | Delivery Time | 45 working days after downpayment |
| Supply Ability | 3 sets per season | Packaging Details | TO BE DETERMINED |
| Cutting Speed | 0-50 m/min | Motor Power | 17.84 kW |
| Place of Origin | Qingdao | Brand Name | Xinmeiteng |
| Model Number | TDSA-2150 | Certification | CE |
| High Light | 2-300 mm Thickness Range ,Touch Screen Control ,Digital Thickness Setting | ||
The TDSA-2150 is a horizontal foam slicer with touch screen digital control. Cutting thickness runs from 2 mm to 300 mm, cutting size is 3000*2000 mm, cutting speed is 0-50 m/min, motor power is 17.84 kW and machine weight is 3500 kg. The machine is CE certified.
Thickness is the number the customer measures. A slicer that needs a hand wheel and a trial cut for every change spends more time setting up than cutting, and the operator ends up leaving one thickness on the machine all week because changing it is slow.
The TDSA-2150 sets thickness on the touch screen and the table reciprocates automatically to that setting. The 2-300 mm range covers thin topper sheets at one end and thick cushion slabs at the other, so a mixed order book runs on one machine without a second slicer.
Topper sheets and thick cushion slabs on the same machine.
Thickness is entered on the panel, not by trial cut.
The table repeats the set thickness pass after pass.
Feed rate is trimmed to suit the foam being cut.
Measure a test sheet at the leading edge, the middle and the trailing edge. If the three readings differ, the block moved during the pass, and the vacuum or the belt is the place to look.
A slicer set by trial cut wastes at least one sheet per change. Across a week of short orders that is more foam than most plants expect, and the scrap is thin sheet that cannot be sold or reused easily.
Digital setting also removes the operator variable. Two operators on two shifts will set a hand wheel differently by a fraction of a millimetre, and the customer notices across a shipment. A stored number keeps the whole order inside the same tolerance.
The 300 mm top of the range matters as much as the 2 mm bottom. Cushion and packaging work needs thick slabs, and a machine limited to 100 mm forces those orders onto a second process.
| Parameter | Value |
|---|---|
| Model | TDSA-2150 |
| Machine type | Horizontal foam slicer with soft belt conveyor |
| Cutting size | 3000*2000 mm |
| Cutting height | 1300 mm |
| Cutting thickness | 2-300 mm |
| Cutting speed | 0-50 m/min |
| Motor power | 17.84 kW |
| Machine weight | 3500 kg |
| Overall dimension | 7000*4500*2500 mm |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Sheet thickness varies across the width | Band knife tension or guide wear | Re-tension the blade and check the guides |
| Foam slipping during the cut | Vacuum or conveyor grip too low for the block density | Raise the suction and check the belt surface |
| Wavy cut face | Feed speed too high for the foam | Reduce the feed rate and re-check blade sharpness |
| Blade drifting off line | Worn wheel or misaligned tracking | Re-track the blade and replace worn wheels |
The machine travels in an export-grade wooden case with the electrics protected and the cutter or blade assembly braced separately. Machine weight is 3500 kg and the overall dimension is 7000*4500*2500 mm, so the unit is quoted against a 20ft or 40ft container depending on the line it ships with.
A packing list, wiring diagram, operation manual and CE declaration travel with every unit. Delivery is 45 working days after downpayment; installation and commissioning support is available remotely or on site.
A: 2-300 mm, set on the touch screen and repeated automatically on every pass.
A: Flexible PU foam blocks from low density packaging foam to denser mattress and furniture foam.
A: On the touch screen; the table reciprocates automatically to the set thickness.
A: 45 working days after downpayment, with installation and commissioning support available.
Tell us the block size, the sheet thickness range and the foam density you cut. We will confirm the TDSA-2150 configuration, quote the machine and share the delivery schedule. Band knives, guide wheels and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!