| Payment Terms | L/C,T/T |
| Cutting Precision | ±0.1 mm (0.6-5 mm sheet) |
| Cutting Height | 1300 mm |
| Cutting length | 59-65 m |
| Supply Ability | 3 sets per season |
| Cutting Thickness | 0.6-170 mm |
| Packaging Details | TO BE DETERMINED |
| Delivery Time | 45 working days after downpayment |
| Cutting Width | 1100-2300 mm |
| Cutting Speed | 60-130 m/min |
| Brand Name | Xinmeiteng |
| Place of Origin | Qingdao |
| Model Number | C818A |
| Certification | CE |
View Detail Information
Explore similar products
Loop Foam CNC Cutting Splitting Machine oval-5 For PU Foam Cutting
PLC Control Loop PU Foam CNC Cutting Machine Ring-2 High Accuracy
CNC Loop Foam Cutting Machine with ±0.3mm Cutting Precision and 0-100m/min
Automatic CNC Loop Foam Cutting Machine Ring-4
Product Specification
| Payment Terms | L/C,T/T | Cutting Precision | ±0.1 mm (0.6-5 mm sheet) |
| Cutting Height | 1300 mm | Cutting length | 59-65 m |
| Supply Ability | 3 sets per season | Cutting Thickness | 0.6-170 mm |
| Packaging Details | TO BE DETERMINED | Delivery Time | 45 working days after downpayment |
| Cutting Width | 1100-2300 mm | Cutting Speed | 60-130 m/min |
| Brand Name | Xinmeiteng | Place of Origin | Qingdao |
| Model Number | C818A | Certification | CE |
| High Light | 0.6-170 mm Thickness Foam Cutter ,131 kW Loop Horizontal Slicer ,Thin to Thick Foam Slicing | ||
The C818A covers a thickness range that normally needs two machines. Sheet can be cut from 0.6 mm to 170 mm on the same endless loop blade, with ±0.1 mm precision on 0.6-5 mm sheet. Cutting speed is 60-130 m/min, cutting height is 1300 mm, width is 1100-2300 mm, the main drive is 131 kW and the machine weighs 60 T on a CE certified frame.
A machine that cuts 1 mm sheet and 150 mm padding has to be stiff and controllable at both ends of the range. At the thin end the risk is compression and witness marks; at the thick end it is feed rate and blade load. The C818A handles both with the same loop blade, which means a plant can move between thin comfort sheet and thick padding without a second set-up or a second machine.
Thin sheet and thick padding on one loop blade, no machine change.
The precision is held at the thin end, where the tolerance is measured.
Feed rate holds at the thick end instead of dropping in the cut.
The range is wide, so the discipline is in the sample sheet: every change of thickness gets one measured sheet before the block runs. That is a cheaper habit than sorting good sheet from scrap afterwards.
Thin sheet and thick padding ask different things of a machine. Thin sheet needs a face that does not compress ahead of the blade and a feed that does not stall; thick padding needs power and a frame that holds the cut line over a large cross-section. A loop blade with a heavy frame answers both, because the blade stays in the material and the load goes into the structure rather than into a reciprocating mechanism.
The compromise in a single machine is speed setting. At 0.6 mm the sheet is fragile, so the pass runs slower than at 100 mm; at 170 mm the blade has more material in the cut, so the feed is set for the blade load rather than for the sheet. Setting speed from the job rather than from the maximum keeps both ends inside tolerance.
The other variable is the block face. At 170 mm a sloped face costs a thicker first sheet; at 1 mm it costs a taper across the whole sheet. Trimming the face before the block goes on is the cheapest quality control on the machine.
| Parameter | Value |
|---|---|
| Model | C818A |
| Cutting thickness | 0.6-170 mm |
| Cutting precision | ±0.1 mm (0.6-5 mm sheet) |
| Cutting speed | 60-130 m/min |
| Cutting height | 1300 mm |
| Cutting width | 1100-2300 mm |
| Cutting length | 59-65 m |
| Main motor power | 131 kW |
| Machine weight | 60 T |
| Certification | CE |
| Symptom | Likely cause | Action |
|---|---|---|
| Thickness drifts along the cut | Blade tension or loop stretch | Check tension and re-set the guide before the next block |
| Chatter marks on the sheet | Worn blade joint or guide play | Inspect the joint, reset guide clearance |
| Wavy sheet edge | Feed speed too high for the foam grade | Reduce speed inside the 60-130 m/min range |
| Bottom corner not cut through | Block height above the head travel | Check block height against the 1300 mm cutting height |
| Blade stalls or breaks | Foam density above 50 kg/m3 or debris in the cut | Check the foam grade and clear debris from the guide |
| Sheet width varies | Block not aligned to the blade line | Re-align the block against the fence before starting |
Loop blade faults show up early. Check the first sheet of each block at both edges and the middle, and one rejected sheet replaces half a shift of scrap.
With a wide thickness range, the machine setting is the main control. Operators should know which thicknesses run at which speed, and should cut a sample whenever the setting changes. A machine that cuts 0.6 mm and 170 mm invites a casual setting change; the sample sheet is what keeps the casual change from becoming scrap.
The machine is 60 T and cuts at up to 130 m/min, so guarding and clearance matter. Keep the blade line clear, keep the guard in place, and keep the emergency stop within reach of the take-off position.
A blade that is right for 170 mm sheet may be marginal at 1 mm sheet, so check the edge on the thin work you run, not only on the thick work. If the thin sheet starts showing a taper, the blade is the first thing to check, not the thickness setting.
Guide clearance and blade tension are the two settings that carry across the range. Record them, and re-check after each blade change so a thin order does not start from a setting that was made for thick sheet.
The machine ships in export packing with the head blocked and the frame braced. At 60 T, confirm the heavy-lift plan, the container or flat-rack booking and the access at the destination before the shipment date.
Delivery is 45 working days after downpayment, payment by T/T or L/C, minimum order one set. Spare loop blades and guide parts can ship with the machine so the first year does not depend on air freight.
A: 0.6 mm to 170 mm on the same loop blade, with ±0.1 mm on 0.6-5 mm sheet.
A: Yes, that is the point of the range; only the thickness setting and speed change.
A: Cutting height 1300 mm, cutting width 1100-2300 mm, cutting length 59-65 m.
A: 131 kW main drive, 60 T machine weight, CE certified.
A: Record thickness, speed, blade hours and the sample measurement for each order.
Tell us the foam type, block or roll size, target sheet thickness and expected output per shift. We will confirm the machine configuration, quote it and share the delivery schedule. Spare blades, guide parts and remote commissioning support are available with every order.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
1500000-3000000
Employee Number:
50~200
Ecer Certification:
Verified Supplier
XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more... XINMEITENG is located in the beautiful seaside city of Qingdao, adjacent to Jinan-Qingdao, Qingyin, Yanqing and Qinghu highways, and connected to Jiaodong International Airport and Qingdao Port Terminal, with a superior geographical location. The company has advanced processing equipment, with more...
Get in touch with us
Leave a Message, we will call you back quickly!