Foshan Huiju Decoration Material Co. Ltd.
| Name | 18mm Plywood Board |
| Thickness | 9mm/12mm/15mm/18mm |
| Payment Terms | T/T |
| Product Features | Eucalyptus Core, Melamine Surface, Precision Edges, Lightweight Design, Customizable Finishes |
| Delivery Time | 15days |
| Primary Applications | Modular Wardrobes, Retail Displays, Office Partitions, Decorative Wall Panels |
| Color | Customized |
| Surface Finish | Melamine |
| Packaging Details | 1220x2440mm/ 4x8ft |
| Packing | Standard Export Packing Or Customized |
| Size | 8x4ft (1220mm X 2440mm) |
| Model Number | ply-19 |
| Certification | CE |
| Brand Name | SUNHOUSE |
| Place of Origin | guangdong, china |
View Detail Information
Explore similar products
Plywood Melamine Plywood Board Interior Exterior Decoration Use for Building
Termite Proof Melamine Plywood Melamine Plywood Board for Interior Exterior
Moisture Resistant Melamine Plywood Melamine Plywood Board for Interior Exterior
Melamine Board Interior Exterior Decoration Use for Building Construction
Product Specification
| Name | 18mm Plywood Board | Thickness | 9mm/12mm/15mm/18mm |
| Payment Terms | T/T | Product Features | Eucalyptus Core, Melamine Surface, Precision Edges, Lightweight Design, Customizable Finishes |
| Delivery Time | 15days | Primary Applications | Modular Wardrobes, Retail Displays, Office Partitions, Decorative Wall Panels |
| Color | Customized | Surface Finish | Melamine |
| Packaging Details | 1220x2440mm/ 4x8ft | Packing | Standard Export Packing Or Customized |
| Size | 8x4ft (1220mm X 2440mm) | Model Number | ply-19 |
| Certification | CE | Brand Name | SUNHOUSE |
| Place of Origin | guangdong, china | ||
| High Light | melamine faced plywood furniture ，MDF board for furniture ，particle board furniture material | ||
All three panels can carry a melamine surface, and all three are sold as "melamine board". They behave very differently once they are cut, screwed, loaded or exposed to moisture. This comparison sets out where each one belongs.
| Property | Melamine Faced Plywood | Melamine MDF | Melamine Particle Board |
|---|---|---|---|
| Construction | Cross-layered veneer core | Homogeneous fibre core | Resin-bonded wood chips |
| Screw holding | Very good, especially on edge | Good on face, weaker on edge | Moderate; needs confirmat or cam fittings |
| Moisture resistance | Good to very good with MR/WBP glue | Poor unless moisture resistant grade | Poor; swells and does not recover |
| Weight | Moderate | Heavy | Heavy |
| Machining | Clean edges, low dust | Very smooth edges, high dust | Chipping at edges, high dust |
| Warping resistance | Excellent across long spans | Good | Moderate |
| Relative cost | Highest | Middle | Lowest |
| Best suited to | Cabinets, wardrobes, wet-risk areas, load-bearing shelves | Doors, fronts, painted or routed profiles | Flat-pack volume furniture, dry interiors |
MDF gives the smoothest machined edge and takes routing and profiling well, which makes it a strong choice for door fronts and shaped components. Particle board remains the cheapest way to produce large volumes of flat-pack furniture for dry interiors, and it performs acceptably where cam fittings rather than screws carry the load. Neither is a substitute for plywood in a moisture-risk position.
Start from the failure mode you cannot accept. If the risk is a hinge pulling out of a door, a shelf sagging across a span, or a cabinet swelling after a leak, plywood is the correct panel. If the priority is the lowest cost per square metre for a dry, lightly loaded interior, particle board will do the job. If the requirement is a perfectly machined decorative edge, MDF is hard to beat. Most real furniture programmes use more than one of the three, and the specification should say which panel goes where.
For screw holding and moisture tolerance, yes. MDF is denser and machines more cleanly, but it is weaker at the edge and far more vulnerable to water.
Plywood where hinges and shelves carry load, or where humidity varies. Particle board is common in dry, lower-cost volume production.
Yes, and this is normal practice — plywood for structure and moisture-risk zones, MDF for machined fronts, particle board for dry flat panels.
Where the furniture is loaded, exposed to humidity or expected to last, the higher panel cost is normally repaid by fewer service claims.
Tell us the application and the failure risk you cannot accept, and we will advise which panel belongs in each position.
Company Details
Business Type:
Trading Company,Exporter,Manufacturer
Ecer Certification：
Verified Supplier
About Foshan Huiju One-Stop Ceiling, Flooring and Partition System Supplier Founded in 1993, Foshan Huiju Decoration Material Co. Ltd. has developed into an established supplier of decorative building materials, providing coordinated ceiling, flooring, partition and furniture board solutions for... About Foshan Huiju One-Stop Ceiling, Flooring and Partition System Supplier Founded in 1993, Foshan Huiju Decoration Material Co. Ltd. has developed into an established supplier of decorative building materials, providing coordinated ceiling, flooring, partition and furniture board solutions for...
Get in touch with us
Leave a Message, we will call you back quickly!