Product Specification

BS EN 75Ni8 1.5634 Alloy Spring Steel Strips

Grade : 75Ni8 Number: 1.5634

Dimensions and tolerances
Thickness: 0.1 to 5 mm; Tolerances: +/- 0.008 to 0.11 mm
Width: 10 to 400 mm; Tolerances: +/- 0.15 to 0.60
*accept nonstandard size, please contact with our sales.

Our Advantage
1. Precise thickness, uniform hardness. Bright surface, smooth edge.
2. High flatness of board surface, high performance after multiple bending.
3. No cracking after stamping, and the quality is stable. And we provide Self-Inspection Reports and Raw-Material Test Certificates.
4. Professional anti-rust protective packaging. On time delivery, competitive price.
5. Large stock available, no MOQ requirement

75Ni8 1.5634 Alloy Steel Strips Chemical composition

75Ni8 1.5634 Alloy Steel Strips Mechanical properties

75Ni8 1.5634 Alloy Steel Strips Delivery condition

Cold rolled narrow steel strip covered by EN10132-4 shall be supplied in one of the following delivery conditions:

• -annealed or annealed and skin passed(+A or +LC);
• -cold rolled(+CR);
• -quenched and tempered(+QT).

NOTE The delivery condition-annealed to achieve spheroidized carbides(+AC)-may be agreed. In such cases, limits on spheroidization and mechanical properties may also be agreed at the time of enquiry and order.

75Ni8 1.5634 Alloy Steel Strips Decarburization

For silicon alloyed steels, decarburization shall not exceed 3% of the material thickness per side,for non silicon alloyed steels, decarburization shall not exceed 2% of the material thickness per side when measure data distance of 5mm from the stripe edge

75Ni8 1.5634 Alloy Steel Strips Surface finish

The surface finish of cold rolled narrow steel strip shall be bright as produced by rolling and annealing in a controlled atmosphere.

The surface finishes of quenched and tempered cold rolled strip are as follows:

1 grey/Alloy oxide finish:unpolished;

2 brigth tempered:unpolished

3 polished: obtained by fine grinding, abrasive brushing or other processes;

4 polished and coloured:Alloy or yellow colour obtained by oxidization by heat treatment.

high carbon steel Alloy tempered spring steel strip is harder, less bendable, and has a higher degree of spring back. Finished products made from this material have better edge retention, which correlates to the material's other properties. Alloy spring steel strip is used widely in the manufacture of springs, prominently in automotive and industrial suspension applications. It is a high carbon steel with a very high yield strength. This material allows objects made of spring steel to return to their original shape despite significant deflection or twisting.

75Ni8 1.5634 Alloy Steel Strips Mandatory information

The following information shall be supplied by the purchaser at the time of enquiry and order to enable the supplier to comply with the requirements of this European Standard:

a) the quantity to be delivered;

b) the designation of the product form (cold rolled narrow strip);

c) the number of the dimensional standard (EN 10140);

d) the dimensions and tolerances on dimensions and shape and, if applicable, letters

denoting relevant special tolerances;

e)the number of this European Standard including the number of the relevant part;

f) steel name or steel number

g) the delivery condition

h) if required, the type of inspection document in accordance with EN 10204.

Carbon steel 75Ni8 1.5634 with 2% nickel

Used especially for the manufacture of band saw blades, 15N20 / 75Ni8 / 1.5634 steel is a carbon steel with properties similar to 1075 steel, but containing a significant proportion of nickel.

Highly valued in the manufacture of Damascus Steel:

It is either used alone to make a blade, or alloyed with another steel 1075, 1095, O2 etc, for the making of a Damascus of a good contrast after etching. Nickel provides a high contrasting power (shiny parts), that is why 15N20 / 75Ni8 / 1.5634 steel is perfect for Damascus forging.

75Ni8 1.5634 carbon steel for the manufacture of knives and swords

It is easy to sharpen and its toughness remains one of its main advantages. Nickel steel 15N20 / 75Ni8 / 1.5634 can be used for the manufacture of knives, but also for the manufacture of swords.

75Ni8 1.5634 Alloy Steel Strips Inspection and testing

• verification of the dimensions
• visual examination of the surface quality
• Chemical analysis
• Extent of testing
• Tensile and bending tests
• Tolerances on shape
• Any requirement from clients