Product Specification

Lithium Tantalate on Insulator (LTOI) wafers are engineered piezoelectric thin-film substrates developed for next-generation acoustic wave devices, particularly Temperature-Compensated Surface Acoustic Wave (TC-SAW) filters used in modern RF front-end modules.

The LTOI structure combines a thin single-crystal lithium tantalate (LiTaO₃) layer with an insulating oxide layer and a silicon support substrate. This advanced architecture enables superior acoustic wave confinement, lower insertion loss, enhanced temperature stability, and improved high-frequency performance compared with conventional bulk lithium tantalate wafers.

LTOI technology has become a key material platform for RF filters used in smartphones, wireless communication infrastructure, IoT devices, and emerging 5G/6G communication systems.

What is an LTOI Wafer?

An LTOI wafer is a bonded piezoelectric substrate consisting of three functional layers:

Lithium Tantalate Thin Film (LiTaO₃)

The active piezoelectric layer responsible for generating and propagating surface acoustic waves.

Silicon Dioxide (SiO₂) Insulating Layer

Acts as an acoustic isolation layer that suppresses energy leakage while providing electrical insulation.

Silicon Carrier Wafer

Provides mechanical support, improved wafer handling, and compatibility with semiconductor manufacturing processes.

This multilayer structure allows acoustic energy to remain concentrated within the active piezoelectric layer, significantly improving filter efficiency and device performance.

Manufacturing Technology

LTOI wafers are typically fabricated using advanced ion-slicing and wafer bonding technologies.

Step 1: Ion Implantation

Hydrogen or helium ions are implanted into a high-quality lithium tantalate crystal at a controlled depth to create a predefined cleavage layer.

Step 2: Wafer Bonding

The implanted lithium tantalate wafer is bonded to a silicon substrate through a thermally grown or deposited SiO₂ layer.

Step 3: Thermal Annealing

Controlled annealing strengthens the bonding interface and initiates layer splitting along the implanted plane.

Step 4: Thin-Film Transfer and Polishing

The transferred lithium tantalate film is precisely polished to achieve excellent thickness uniformity and ultra-low surface roughness.

This process enables wafer-scale production of high-quality piezoelectric thin films suitable for advanced RF devices.

Key Advantages

Excellent Temperature Stability

LTOI significantly reduces frequency drift caused by environmental temperature changes, making it the preferred substrate for TC-SAW filters.

High Electromechanical Coupling

Lithium tantalate exhibits strong piezoelectric characteristics, enabling efficient conversion between electrical and acoustic signals.

High-Frequency Operation

The thin-film architecture supports higher operating frequencies than conventional bulk lithium tantalate substrates, making it suitable for advanced RF bands.

Superior Acoustic Confinement

The buried oxide layer minimizes acoustic energy leakage into the substrate, improving filter selectivity, quality factor (Q), and insertion loss performance.

Semiconductor Manufacturing Compatibility

LTOI wafers can be integrated into wafer-level fabrication processes, enabling scalable and cost-effective mass production.

Typical Applications

RF Front-End Filters

• TC-SAW Filters
• SAW Filters
• Duplexers
• Multiplexers

Mobile Communication Devices

• Smartphones
• Tablets
• Wearable electronics
• IoT devices

Wireless Infrastructure

• 4G LTE base stations
• 5G communication equipment
• Small-cell networks
• Future 6G communication systems

Acoustic Wave Components

• High-frequency resonators
• RF signal processing devices
• Precision frequency control components

Available Specifications

Why Choose LTOI Instead of Bulk Lithium Tantalate?

LTOI technology provides a more advanced platform for manufacturing compact, high-performance RF filters required by modern wireless communication systems.

FAQ

1. What is the primary application of LTOI wafers?

LTOI wafers are primarily used for TC-SAW and SAW filters in RF front-end modules for smartphones, wireless communication equipment, and high-frequency electronic systems.

2. Why are LTOI wafers preferred for 5G RF filters?

The thin-film structure offers superior acoustic confinement, lower insertion loss, and improved temperature stability, which are critical requirements for modern 5G communication bands.

3. Can LTOI wafers be customized?

Yes. Film thickness, crystal orientation, oxide layer thickness, wafer diameter, and surface specifications can all be customized according to device design requirements.

Related Product

TFLN / TFLT on SiPh Platform for Ultra-Fast, Low-Power Optical Modulators