1D Resistivity Meter Vertical Electrical Sounding For Groundwater Investigation

Product Specification

1D Vertical Electrical Sounding Investigation Geophysical Electrical Resistivity Meter

WDJD-3A Multi-function Digital DC Resistivity/IP Meter can conduct 1D electrical resistivity survey, in association with only power source, electrodes and ordinary cables. In this case, what electrode array applicable is the first 8 electrode arrays introduced in Section One Electrode Arrays of General Electrical Resistivity Survey, namely, four-pole vertical electric sounding(4P-VES), Combined electric sounding(3P-VES), four-pole electrical profiling (4P-PRFL), Combined electrical profiling (3P-PRFL), Rectangle/Middle Gradient (RECT), dipole-dipole (DIPOLE), IP survey in Well-Well Azimuth Sounding(IP-BUR), Five-pole Longitudinal Axis Electical Sounding (5P-VES).Except for access to these electrode arrays, user can also input geometric factor K value directly through Item 9 Input K value for some special electrode array configurations that is not available in system.

Application

• Mineral prospecting in geological surveys - identify potential mineral deposits.
• Groundwater exploration - locate and assess water resources.
• Environmental investigations - identify contamination and remediation sites.
• Engineering projects - determine foundation stability and soil mechanics.
• Archaeological studies - detect buried structures and artifacts.
• Civil engineering - determine soil composition and geotechnical properties.

Technical Parameter

Main Features and Functions

• Transmitting unit and receiving unit are of all-in-one design, portable and lightweight.
• CMOS large-scale integrated circuit, special stand-by mode, compact size, low power consumption.
• System turns off WDJD-3A mainframe automatically if there is no operation in 10 minutes.
• High anti-interference performance and precision, integrated with multistage wave filtration and signal enhancement technologies.
• In good condition, multi-electrode imaging function can complete measurement of a 552-data-points cross section.
• Automatically achieving compensation of self-potential, drift and electrode polarization.
• Receiving unit supports transient over-voltage protection, transmitting unit supports
• Over-voltage protection, over-current protection and AB open-circuit protection.
• Measured curve can be plotted through WDJD-3A mainframe.
• Simple calculator fulfills calculation of geometric factor and other calculations on the spot.

Product Display

Company Picture