Silicon Micron Polyester Primer Gb T 12754 PPGI Colour Coated Sheet

Product Specification

Silicon Micron Polyester Primer Gb T 12754 PPGI Colour Coated Sheet

1. Product Overview

PPGI colour coated steel coil is used where a metallic coated steel substrate and a finished painted surface are both required in one material. This product can be supplied on galvanized steel coil or galvalume steel coil, so it is suitable for different corrosion environments and downstream fabrication routes.

The product range is designed for color coated sheet and coil processing where appearance, corrosion resistance, and forming compatibility need to be considered together. With a width range of 700–1250mm and multiple paint system options, it fits common roll forming and panel production lines.

2. Technical Solution

The product uses a metallic coated steel base combined with an organic paint system. The metallic coating can be supplied as Z40–Z275 on GI base or AZ40–AZ150 on GL base. In practical use, the service result depends on the combined effect of metallic coating level, paint build, panel design, cut edge exposure, and installation environment.

The available paint systems include PE, SMP, HDP, and PVDF. Top side coating is 15–30μm. Back side coating is 5–10μm or 5+10–20μm. For projects exposed to stronger weathering, the paint system should be selected together with the substrate and metallic coating level rather than treated as an appearance option only.

3. Specifications

4. Application

• This material is suitable for roofing sheets, wall cladding, corrugated sheets, façade panels, and general building sheet fabrication.
• It can also be used for decorative sheet parts, light industrial panels, appliance-related panels, and other fabricated components where a finished visible surface is preferred over post-paint processing.

5. Processing

• The coil can be supplied for cut-to-length processing, slitting, roll forming, profiling, and general sheet metal fabrication.
• It is suitable for downstream conversion into plain sheets and profiled panels. Width should be selected according to the final effective coverage and roll forming line requirement.

6. Advantages

• GI and GL base material options allow the product to be matched to different corrosion environments.
• The metallic coating range from Z40–Z275 or AZ40–AZ150 supports different durability targets instead of using one fixed coating level for all projects.
• Multiple paint systems allow the product to be selected for standard use, better weather exposure, or longer finish retention.
• The 700–1250mm width range matches common roofing and cladding production routes.
• The defined top and back coating structure supports more consistent processing and service selection.

7. How to Choose

• Choose GI base when the project requires a galvanized substrate for standard coated sheet applications.
• Choose GL base when the project requires aluminum-zinc coated substrate and improved exterior corrosion performance.
• Choose PE for standard use, SMP for better weather resistance, HDP for stronger durability demand, and PVDF for projects requiring stronger UV resistance and longer finish retention.
• Choose the metallic coating level according to the service environment and corrosion protection target.
• Choose the final width according to panel layout, effective coverage, and roll forming line configuration.

8. FAQ

Q1. What base materials are available
Galvanized steel coil GI and galvalume steel coil GL are available.

Q2. What metallic coating range is available
The listed metallic coating range is Z40–Z275 or AZ40–AZ150.

Q3. What paint systems are available
The listed paint systems are PE, SMP, HDP, and PVDF.

Q4. What width range is available
The listed width range is 700–1250mm.

Q5. What coil IDs are available
The listed coil IDs are 508mm and 610mm.