A36 Steel Grating Panels Hot Dipped Galvanized Drainage Grates 32x5mm

Product Specification

A36 Steel Grating Panels Hot Dipped Galvanized Drainage Grates 32x5mm

1. Product Overview

Hot dipped galvanized steel grating is used where load-bearing support, open drainage, and anti-slip walking surface are required in one component. This product is suitable for drainage grates, trench covers, stair treads, platforms, and structural access areas where water discharge and safe footing need to be considered together.

This page is centered on A36 steel grating panels with 32x5mm bearing bar as a representative configuration. The galvanized finish is intended for outdoor and industrial use where corrosion protection is needed after fabrication.

2. Technical Solution

The product uses flat bearing bars combined with cross bars to form an open-grid structure. In actual use, final performance depends on the bearing bar size, bearing bar pitch, cross bar type, cross bar pitch, support span, and galvanizing condition.

The source lists bearing bar options from 20x5mm up to 75x8mm, with 32x5mm as one of the common structural sizes. Cross bars can be 5x5mm, 6x6mm, or 8x8mm in twisted bar or round bar form. This matters in practical selection because the load-bearing bar controls span capacity, while the cross bar and pitch affect surface stability, drainage opening, and installation fit.

The product can be supplied as plain flat bar type, serrated type, or I bar type. Serrated grating is more suitable where additional slip resistance is required on stair treads or wet walking surfaces.

3. Specifications

4. Application

• This material is suitable for drainage channels, trench covers, stair treads, platforms, walkways, and structural access flooring.
• It can be used in buildings, workshops, plant platforms, utility openings, and fabricated structural covers where open area drainage and foot traffic need to be handled together.
• Because the source states that the grating can be welded into different shapes according to drawings and specifications, it is also suitable for customized openings and non-standard structural layouts.

5. Processing

• The grating can be fabricated according to drawings and project dimensions.
• It is suitable for welding, cutting, edge banding, and shaped panel fabrication for drainage and structural access systems.
• For drainage channel use, the opening size and support frame should be confirmed before finalizing the bearing bar and cross bar specification. For stair treads and platforms, the span direction and load path should be checked before selecting the final bearing bar size.

6. Advantages

• The open-grid structure supports drainage while maintaining a load-bearing walking surface.
• Hot dip galvanized surface treatment improves corrosion resistance in outdoor and industrial environments.
• Multiple bearing bar sizes and pitch options allow the grating to be matched to different spans and load levels.
• Serrated and plain bar options make the product suitable for both standard structural flooring and slip-resistant access areas.
• The product can be fabricated into different shapes according to drawings, which helps in drainage and structural projects with non-standard openings.

7. How to Choose

• Choose 32x5mm bearing bar when the project needs a common medium-duty grating size for structural and drainage use.
• Choose smaller bearing bars for lighter pedestrian applications with shorter spans.
• Choose larger bearing bars when the support span is longer or the service load is higher.
• Choose serrated flat bar when the application includes wet walking surfaces or stair treads that need better grip.
• Choose hot dip galvanized surface treatment for outdoor, wet, or industrial service conditions where corrosion resistance is important.

8. FAQ

Q1. Is this product suitable for drainage channels
Yes. The open-grid structure is suitable for drainage channel and trench cover applications where water discharge is required.

Q2. Can this steel grating be used for stair treads
Yes. The source directly refers to galvanized stair and step grating applications, so it is suitable for stair tread fabrication when the correct bar size is selected.

Q3. What is the featured bearing bar size on this page
The featured bearing bar size is 32x5mm.

Q4. What cross bar options are available
The listed cross bar options are 5x5mm, 6x6mm, and 8x8mm in twisted bar or round bar form.

Q5. Can the grating be made according to drawings
Yes. The source states that the steel grating can be welded into different shapes according to drawings and specifications.