G60 GRADE 50 KSI PER ASTM 653 Hot Dip Galvanised Iron Sheets

Product Specification

G60 GRADE 50 KSI PER ASTM 653 Hot Dip Galvanised Iron Sheets

1. Product Overview

Hot dipped galvanized steel sheet is used where the steel substrate needs metallic zinc protection before forming, cutting, or installation. This product range is suitable for pipe making, industrial panels, and building sheet fabrication where coating mass, thickness control, and surface condition need to be selected together.

The page is positioned around ASTM A653 G60 Grade 50 KSI galvanized sheet and coil. In practical projects, this type of material is typically selected when the buyer needs a balance between corrosion protection, forming compatibility, and stable mechanical performance for downstream processing.

2. Technical Solution

This product uses a hot dip galvanized coating route, where zinc forms a protective metallic barrier on the steel surface. In service, the actual corrosion performance depends on zinc coating weight, cut-edge exposure, storage condition, drainage detail, and the final operating environment.

The listed product range covers G60 and a broader coating window of 30-275g/m2. Spangle can be supplied as zero, minimized, regular, or big according to appearance and processing requirements. Surface condition can also be selected as passivated, oiled, or anti-finger treated, which affects storage stability, handling cleanliness, and fabrication behavior.

For pipe and panel production, thickness, hardness, and coating level should be selected together. Thin gauges improve forming efficiency, while higher coating mass supports stronger sacrificial protection in exposed service conditions.

3. Specifications

4. Application

• This material is suitable for making pipes, industrial panels, roofing components, building sheet parts, and steel structure related fabrication.
• It can also be used for household appliance housings, transportation related parts, industrial control cabinets, refrigeration equipment housings, and furniture related metal components where galvanized surface protection is required before final assembly.

5. Processing

• The sheet or coil can be processed by slitting, cut-to-length, bending, profiling, punching, and general sheet metal fabrication.
• For pipe making, thickness, hardness, and coating level should be matched to the forming route. For visible parts, the spangle type and surface treatment should be confirmed before production because they directly affect appearance and handling condition.

6. Advantages

• The ASTM A653 G60 route is widely used for practical galvanized fabrication where coating consistency and process compatibility matter.
• The 0.15-0.8mm thickness range is suitable for light gauge processing and efficient forming.
• The 100-1250mm width range supports both slit coil conversion and standard-width sheet processing.
• Multiple spangle options make the material easier to match to visible-surface and downstream finishing requirements.
• Passivated, oiled, and anti-finger surface conditions give more flexibility for storage, transport, and production handling.

7. How to Choose

• Choose zinc coating level according to the final service environment. Lower coating levels may be acceptable for protected indoor use, while higher coating levels are more suitable for more demanding conditions.
• Choose thickness according to forming route and rigidity target. Thin gauges are more suitable for lighter pipe and panel conversion, while slightly higher gauges improve stiffness.
• Choose zero or minimized spangle when surface uniformity is more important. Choose regular or big spangle when standard galvanized appearance is acceptable.
• Choose passivated, oiled, or anti-finger surface according to storage duration, visible surface requirement, and downstream handling process.

8. FAQ

Q1. Is this product suitable for pipe making

Yes. The page directly lists pipe making as an application, and the thickness range is suitable for galvanized pipe and profile fabrication when the correct specification is selected.

Q2. What does G60 mean for this galvanized sheet

G60 refers to the galvanized coating designation in the ASTM A653 route. It is used as a common coating level for galvanized steel sheet applications.

Q3. What thickness range is available

The detailed listing on this page shows 0.15-0.8mm as the working thickness range for this product set.

Q4. What spangle options are available

The listed spangle options are zero spangle, minimized spangle, regular spangle, and big spangle.

Q5. What surface conditions are available

The listed surface conditions are passivated chromated, oiled, and anti-finger treatment.