Flammability Test Equipment

Product Specification

Multifunctional Bond Strength Detector

First, the scope of use
Bonding strength testing of facing bricks, tiles, insulation boards, paints, paints, rivets, anchors, mortars, etc.

Second, product features
Firstly, according to the characteristics of low bonding strength and small adhesion of the facing brick, the maximum tensile force of the HD series multi-functional bond strength detector is designed to be 10KN to ensure the detection accuracy of the instrument. In the design, the equipment stroke is lengthened within the allowable range, taking into account the drawing test of the rivet. HD series multi-functional adhesive strength detector can be continuously and evenly loaded, compact and durable. It adopts liquid crystal display adhesion value, automatically and accurately records the adhesion value and gives peak retention. The product is powered by dry battery, compact and light. The total weight is about 3 kg, which is convenient for carrying and using on site.
The device can be customized

Third, the main technical parameters
1. Force range: 0~10KN (can be customized according to customer needs)
2. Stroke: 100mm (pull test for rivets)
3. Measurement accuracy: ≤±1% (1.5% better than other test machines)
4. Minimum resolution: 1N
5. Display: LCD display number
6. Peak hold: positive peak hold
7. Data saving: 50 data can be stored
8. Instrument power supply: 1 section of rechargeable battery
9. Operating environment: temperature 0 ~ 45 ° C humidity < 85%
10. Product standard: sample block 40*40 45*95 two specifications each three
11. Sample block 100*100 three (optional)
12. Rivet drawing fixture One (optional)

Fourth, design standards:
JGJ3056-1999 "Digital Display Bond Strength Tester"
JGJ110-2008 "Inspection Standard for Bonding Strength of Building Finishing Tiles"
JGJ126-2000 "Construction and Acceptance Procedures for Exterior Wall Finishing Bricks"
JGJ144-2009 "Technical Regulations for External Thermal Insulation Engineering"
JG158-2004 "Glass powder polystyrene particle exterior insulation system"
JG149-2003 "Expanded polystyrene board thin plastering exterior insulation system"
GB14907-2002 "General technical conditions for fire retardant coatings for steel structures"

Fifth, with the goods list
Host 1
Intelligent digital force gauge 1
Sample block 40*40 three
Sample block 45*95 three
Sample block 100*100 three (optional)
Rivet drawing fixture one (optional)

The multi-functional adhesive strength tester is designed according to the industry standard JGJ110 "Construction Engineering Finishing Tile Bonding Strength Inspection Standard", and at the same time, it also considers the professional bond strength tester developed by the insulation bond inspection standards for insulation boards, paints, rivets and other materials.
The HD series multi-functional bond strength detector was developed and produced in 2005 by Nanjing Haolei Instrument and Owens Corning (Nanjing).
Firstly, according to the characteristics of low bonding strength and small adhesion of the facing brick, the maximum tensile force of the HD series multi-functional bond strength detector is designed to be 10KN to ensure the detection accuracy of the instrument. In the design, the equipment stroke is lengthened within the allowable range, taking into account the drawing test of the rivet. HD series multi-functional adhesive strength detector can be continuously and evenly loaded, compact and durable. It adopts liquid crystal display adhesion value, automatically and accurately records the adhesion value and gives peak retention. The product is powered by dry battery, compact and light. The total weight is about 3 kg, which is convenient for carrying and using on site.

Non-standard customization
design standards:
JGJ110 "Inspection Standard for Bonding Strength of Building Finishing Tiles"
Applicable standards:
JGJ110-2008 "Inspection Standard for Bonding Strength of Building Finishing Tiles"
JGJ126-2000 "Construction and Acceptance Procedures for Exterior Wall Finishing Bricks"
JGJ144-2009 "Technical Regulations for External Thermal Insulation Engineering"
JG158-2004 "Glass powder polystyrene particle exterior insulation system"
JG149-2003 "Expanded polystyrene board thin plastering exterior insulation system"
GB14907-2002 "General technical conditions for fire retardant coatings for steel structures"
Scope of application:
Insulation board, facing brick, rivet, paint, anchor bolt, mortar