Guangzhou Zhengqi Technology Co., Ltd.
| Model NO. | PGB-700 |
| Warranty | 12 Months |
| Automatic Grade | Automatic |
| Installation | Vertical |
| Driven Type | Electric |
| Transport Package | Poly-Wood Case |
| Specification | 700x700x100 |
| Trademark | Daheng |
| Origin | China |
| HS Code | 8424899990 |
| Supply Ability | 1000/Year |
| Package Size | 100.00cm * 100.00cm * 100.00cm |
| Package Gross Weight | 100.000kg |
| After-sales Service | Provided |
| Precision | High Precision |
| Condition | New |
| Samples | US$ 11900/Piece 1 Piece(Min.Order) | |
| Customization | Available | Customized Request |
| Shipping Cost | about shipping cost and estimated delivery time. |
| Initial Payment Full Payment | |
| Currency | US$ |
| Return&refunds | You can apply for a refund up to 30 days after receipt of the products. |
| Certification | CCC, FDA, RoHS, ISO, CE |
View Detail Information
Explore similar products
High Precision Silicone Glue Dispenser Semiautomatic Grade and Customized
Semiautomatic and High Precision 3 Axis Robot Dispensers for Textile Industry
180kg Capacity Automatic Electric Two-component Adhesive Filling Machine for
High Strength Two Component Black Polyurethane Resin Potting Machine for
Product Specification
| Model NO. | PGB-700 | Warranty | 12 Months |
| Automatic Grade | Automatic | Installation | Vertical |
| Driven Type | Electric | Transport Package | Poly-Wood Case |
| Specification | 700x700x100 | Trademark | Daheng |
| Origin | China | HS Code | 8424899990 |
| Supply Ability | 1000/Year | Package Size | 100.00cm * 100.00cm * 100.00cm |
| Package Gross Weight | 100.000kg | After-sales Service | Provided |
| Precision | High Precision | Condition | New |
| Samples | US$ 11900/Piece 1 Piece(Min.Order) | | Customization | Available | Customized Request |
| Shipping Cost | about shipping cost and estimated delivery time. | Initial Payment Full Payment | |
| Currency | US$ | Return&refunds | You can apply for a refund up to 30 days after receipt of the products. |
| Certification | CCC, FDA, RoHS, ISO, CE | ||
| High Light | epoxy glue potting machine ，electric glue potting machine ，electric epoxy potting machine | ||
Drops always happened when valve closed . The reason may be low concentration of glue , big air-pressure or large diameter of needles.
Narrow needles will effect the flow of the liquid and cause back pressure . It will lead to dropping when the valve closed . Too narrow needles will effect the drainage of air when valve start to work, but it can be solved if change suitable needles .
Conical needles with less back pressure and liquid flow smoothly .
It is better to drainage of the air advance or use no-foam glue or deaeration to avoid the air cause dropping after valve closed .
The problem cause mainly because of the storage flow pressure tank or air pressure is not stable.
Inlet pressure regulating table should be set lower 10-15psi than factory minimum pressure . The pressure in pressure tank should be set upper than the middle pressure of regulating table . It should be avoided to use the pressure lower than the middle pressure of regulating table .
Control pressure of rubber valve at least higher than 60psi to assured glue evenly .
We should check the glue output speed at last . The glue is uneven if the time less than 15/1000s , the output speed more longer , the glue dispensing will be more stable .
It should be changed the pipe from 1/4 to 3/8 if the flow velocity too slowly .
The pipe is the shorter the better if no requirement .
Excessive fluid pressure and short valve opening time may lead to the air infiltration liquid . We can use the conical needles and reduce fluid pressure .
This problem is caused by heavy moisture and recycle instant glue . We should make sure to use new instant glue and wash the pipes with dry . Make sure air dry and add filter between plant air pressure and valve .
Make sure to use black pipeline.
Don't add new UV glue to old UV glue in pressure tank , we should drain off the old UV glue before pouring new UV glue into pressure tank because the UV glue will produce bubble after a period of time and lead to glue dispensing unevenly .
Normally , it may cause air problem if the needle less than NO.20 . It is better to use large steel needles or conical needles to avoid to use winding needles.
It is better to use storage pressure cylinder of methybenzene toluene to self-cleaning one time for each shift . The more frequently cleaning the better .
Company Details
Business Type:
Manufacturer,Exporter,Trading Company,Seller
Year Established:
2003
Total Annual:
5000000-22000000
Employee Number:
100~120
Ecer Certification：
Active Member
Company Introduction Guangzhou Zhengqi Technology Co., Ltd. recognized as a national high-tech enterprise, specializes in automation system integration and services, offering cutting-edge products and solutions to global markets. Guangzhou Daheng Automation Equipment Co., Ltd. operates as a wholly... Company Introduction Guangzhou Zhengqi Technology Co., Ltd. recognized as a national high-tech enterprise, specializes in automation system integration and services, offering cutting-edge products and solutions to global markets. Guangzhou Daheng Automation Equipment Co., Ltd. operates as a wholly...
Get in touch with us
Leave a Message, we will call you back quickly!