WUXI GLOBAL POWER TECHNOLOGY CO.,LTD
| Place of Origin: | China (Mainland) |
| Brand | smartgen |
| Alternator Frequency | 50Hz / 60 Hz |
| Weight | 0.15kg |
| Speed sensor voltage | 1V to 24V (active value) |
| Controller | HGM1780 |
| Speed sensor Frequency | ax. 10kHz |
| Alternator Input Range | 15 - 305 V AC RMS (+20%) |
| Supply Ability | 2000 sets/year |
| Delivery Time | 25 days after receiveing the down-payment |
| Packaging Details | plastic foam or plywood case packing |
| Brand Name | Smartgen |
| Model Number | HGM1780 |
| Certification | CE / ISO |
| Place of Origin | Jiangsu, China |
View Detail Information
Explore similar products
Automatic Diesel Generator Controller IP55 Gasket 88mm X 76mm X 44mm
Smartgen Deepsea Diesel Generator Controller Waterproof 50Hz 60Hz
Brushless Generator Control Module 80Kw Prime Power 8-35V Dc Continuous
50Hz 60Hz Deepsea Generator Controller DSE4620 For Generator Set
Product Specification
| Place of Origin: | China (Mainland) | Brand | smartgen |
| Alternator Frequency | 50Hz / 60 Hz | Weight | 0.15kg |
| Speed sensor voltage | 1V to 24V (active value) | Controller | HGM1780 |
| Speed sensor Frequency | ax. 10kHz | Alternator Input Range | 15 - 305 V AC RMS (+20%) |
| Supply Ability | 2000 sets/year | Delivery Time | 25 days after receiveing the down-payment |
| Packaging Details | plastic foam or plywood case packing | Brand Name | Smartgen |
| Model Number | HGM1780 | Certification | CE / ISO |
| Place of Origin | Jiangsu, China | ||
| High Light | Water Cooled diesel generator auto start controller ，50Hz diesel generator auto start controller ，60Hz dg auto start panel | ||
|
Item |
Content |
|
Operating Voltage |
DC8. 0V to 35. 0V, Continuous Power Supply |
|
Power Consumption |
Standby, 12V-0.3W, 24V-0.4W Working, 12V-1W, 24V-1.1W |
|
Alternator voltage Input |
1P2L 15V AC ~ 360 V AC (ph-N) |
|
Alternator Frequency |
50/60Hz |
|
Speed sensor voltage |
1V to 24V (active value) |
|
Speed sensor Frequency |
Max. 10kHz |
|
Max. accumulative running time |
99999.9 hours (it is 1/10 hour after decimal point, means changing/6 min.) |
|
Start Relay Output |
1Amp DC28V DC B+ power on to output |
|
Fuel Relay Output |
1Amp DC28V DC B+ power on to output |
|
Stop Relay Output |
1Amp DC28V DC B+ power on to output |
|
Idle Relay Output |
1Amp DC28V DC B+ power on to output |
|
Configured Relay Output |
1Amp DC28V DC B+ power on to output |
|
Switching value input port |
Active when connected with B- |
|
Overall dimensions |
88mm x 76mm x 44mm |
|
Panel cut off |
78x66mm |
|
Working conditions |
Temperature, (-25~+70)ºC Humidity, (20~90)% without condensation |
|
Storage Condition |
Temperature, (-30~+80)ºC |
|
Protective Level |
IP55, when waterproof rubber ring added between controller and its panel. IP42, when waterproof rubber ring not have between controller and its panel. |
|
Insulation Intensity |
Object: among in input/output/power Quote standard: IEC688-1992 Test way: AC1.5kV/1min 1mA leakage current |
|
Weight |
0.15kg |
Product Picture:
Our Service:
Performance and characteristics:
HGM400 series controller has two variants:
HGM410: Automatic Start Module, it controls generator to start/stop by remote start signal;
HGM420: Based on HGM410, add mains AC monitoring, mains/generator automatic switching control (AMF), especially suitable for automatic control system composed by mains and generator.
132x64 LCD with backlight, optional language interface (Chinese, English, Spanish and Russian), push-button operation;
Adapt to 3 phase 4 wire, single phase 2 wire, 3 phase 3 wire and 2 phase 3 wire (120/240V), 50/60Hz power supply;
Can measure and display 3-phase voltage, 3-phase current, frequency, and power;
For mains: Over/under voltage, lack of phase; for generator: over/under voltage, over/under frequency, over current;
Precision measure and display engine parameters,
Control protection: Automatic start/stop, switch on/off (ATS control) and fault display;
With ETS, idle control, pre-heat control, acceleration and deceleration control, all are relay output;
Parameters setting: Allow user to modify parameters and store them in internal FLASH, which cannot be lost even when power off. All the parameters can be adjusted from the front panel, or by PC via an SG72 adaptor;
Types of temperature and pressure sensor can be directly used and user defined;
Conditions of crank disconnect can be selected.(magnetic pickup, oil pressure, generator);
Power supply range is (8~35)VDC, accommodating to different starting voltage;
All parameters use digital modulation, abandoning analog modulation of conventional potentiometer, more reliability and stability;
Our Main Product:
Warranty and Maintenance:
Company Details
Business Type:
Manufacturer,Exporter
Total Annual:
200-500
Employee Number:
>100
Ecer Certification：
Verified Supplier
Wuxi Global Power Technology Co., Ltd Wuxi Global Power Technology CO., Ltd. is located in Jiangsu Wuxi national Hi-tech Nanchang district , as a renowned national high-tech enterprise , having been engaged in research , development , manufacture and sales of energy-saving and environme... Wuxi Global Power Technology Co., Ltd Wuxi Global Power Technology CO., Ltd. is located in Jiangsu Wuxi national Hi-tech Nanchang district , as a renowned national high-tech enterprise , having been engaged in research , development , manufacture and sales of energy-saving and environme...
Get in touch with us
Leave a Message, we will call you back quickly!