Standby Power 132kw 165kva Perkins Diesel Genset 1106A-70TAG2 Delixi Switch

Product Specification

 
Standby Power 132kw / 165kva Perkins Diesel Genset 1106A-70TAG2 Delixi switch

Technical Specifications : 

1. Tightly structure, excellent design and craft
2. Excellent cooling system, reliable performance under the harshest conditions (ambient temperature up to 40℃ and altitudes up to 1000m)
3. Self-diagnostic capability simplifies troubleshooting
4. LCD display shows system status and setup information
5. Automatic voltage regulator protects your sensitive electronics from harmonic distortion and unstable power quality
6. Enclosed muffler for added quietness
7. Service and maintenance accessible through easy-latch side service door.

 
 
 Perkins Engine:
feature:

• Six-cylinder, water-cooled, in-line diesel engine
• Efficient fuel system for max power output and durability
• Large-capacity air cleaner
• Cost effective, fuel efficient and reliable performance
• Functional engine with compact structure
• Excellent after-sales service and sufficient spare parts supplying
• Easy installation and ready access for routine maintenance

Model                 1106A-70TAG2

 
Alternator:
 feature:

• Advanced automatic voltage regulator (AVR) control for trouble-free operation under the most demanding conditions
• 2/3 pitch winding as standard, to avoid excessive neutral currents
• Single or two bearing construction with dynamically balanced rotor and sealed-for-life bearings
• Easy access for installation and maintenance
• IP23 as standard
• Self-excited control system
• Resist of corruption of oil and acid 

Model                   UCI 274F  

 
 
Our Picture :

 
 
 
 
Our Package :
Plastic film + Pearl cotton + Wrapping film for long transportation
 

 
 
Inspection and Test:
1. Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
2. All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
3. The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
4. Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.
5. The engine and generator shall be tested individually in accordance with relevant standards specified above.
6. The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.
 
Guarantee for Our Generators:
1) Guarantee Period: One year or 1000hours whichever comes first.
2) During the guarantee period, the spare-parts will be sent through your shipping agency in China.
3) Spare-parts can also be sent thought FEDEX or DHL, but the shipping cost will be charged on both sides for 50%.
4) 24 hours service hot-line is available for customers.