Shenzhen Gracyfiber Technology Co., Ltd.
| Fiber pitch | 250μm |
| Fiber angle | A0° |
| Insertion loss | < 0.3dB |
| Channel count | 8CH |
| Model Number | 910001708-80 |
View Detail Information
Explore similar products
Ultra Low Profile Lidless Optical Fiber Array Solutions 1 Channel To 32 Channels
High Precision Fiber Collimator Array , Optical Fiber Array Collimator For
High Density Lidless Fiber Array 1CH 2CH 4CH 8CH 12CH 16CH 24CH 32CH For Silicon
1CH SM Fiber Array | 0° Flat Polish, Quartz Block 2.5x2.5x7.9mm | Corning SMF
Product Specification
| Fiber pitch | 250μm | Fiber angle | A0° |
| Insertion loss | < 0.3dB | Channel count | 8CH |
| Model Number | 910001708-80 | ||
| High Light | 8CH lidless single mode fiber array ，250um pitch fiber array with MTP connector ，Corning SMF-28e fiber array APC female | ||
This 8-channel single-mode fiber array assembly uses Corning SMF-28e fiber to connect a 250μm pitch Lidless Fiber Array to a 12-core MTP/APC female connector. It is suitable for multi-channel photonic devices, optical modules, and precision fiber coupling systems.
Utilizes an 8-core effective channel structure, suitable for multi-channel parallel optical signal coupling and transmission.
The center-to-center spacing between adjacent fibers is 250μm, suitable for optics and coupling interfaces with corresponding pitches.
The FA end adopts an A0° design, meeting the fiber coupling requirements of vertical or specified geometries.
The array end is not equipped with a cover plate, facilitating subsequent optical coupling, encapsulation, and active alignment for customers.
Uses Corning SMF-28e single-mode fiber, suitable for single-mode optical communication and photonic device interconnection.
Utilizes a 12-pin MTP/APC female connector, using only the middle 8 channels (channels 3–10).
IL < 0.3dB, helping to reduce optical power loss in the Fiber Array to MTP connection link.
RL > 50dB, reducing the impact of connector end-face reflections on the optical system.
Total length including connector is 100±10cm, suitable for internal equipment and inter-module connections.
Fiber Array dimensions are 10*3.5*1.5mm, facilitating integration into compact optical systems.
This component uses a standard 12-pin MTP/APC female connector, but only the middle 8 fiber positions are actually used, i.e., Channels 3–10.
The channel correspondence is as follows:
| MTP Channel | FA Channel |
|---|---|
| MTP Channel 3 | FA Channel 1 |
| MTP Channel 4 | FA Channel 2 |
| MTP Channel 5 | FA Channel 3 |
| MTP Channel 6 | FA Channel 4 |
| MTP Channel 7 | FA Channel 5 |
| MTP Channel 8 | FA Channel 6 |
| MTP Channel 9 | FA Channel 7 |
| MTP Channel 10 | FA Channel 8 |
MTP channels 1, 2, 11, and 12 are not used in this configuration.
A 250μm Pitch indicates that the distance between the centers of two adjacent fibers in the Fiber Array is 250μm. Customers need to confirm that the pitch of the target device matches the FA when coupling PICs, optical chips, or other array devices.
A Lidless Fiber Array refers to an array where no additional cover plates are used to cover the fibers. This structure provides a more open geometric space for the fiber endface, facilitating chip coupling, active alignment, and custom packaging.
A0° indicates that the Fiber Array uses a 0° fiber exit or endface angle design. This parameter describes the FA body structure and is not the same concept as the APC endface structure of the MTP/APC connector.
The product uses Corning SMF-28e single-mode fiber.
Standard specifications are:
Insertion Loss: IL < 0.3dB
Return Loss: RL > 50dB
The total length, including the MTP connector, is 100±10cm, protected by 2mm yellow loose tube tubing.
FA body dimensions:
10 * 3.5 * 1.5mm
Connector type:
12F MTP/APC Female
Eight channels are actually used.
The Fiber Array assembly is first placed in foam and secured with self-adhesive tape before being packed into a cardboard box to reduce the risk of mechanical impact to the FA end face and fiber optic assembly during transportation.
Company Details
Business Type:
Manufacturer
Year Established:
2014
Employee Number:
150~200
Ecer Certification：
Verified Supplier
.gtr-container-f7h9k2 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; max-width: 100%; box-sizing: border-box; } .gtr-container-f7h9k2 p { font-size: 14px; margin-bottom: 1em; text-align: left... .gtr-container-f7h9k2 { font-family: Verdana, Helvetica, "Times New Roman", Arial, sans-serif; color: #333; padding: 20px; line-height: 1.6; max-width: 100%; box-sizing: border-box; } .gtr-container-f7h9k2 p { font-size: 14px; margin-bottom: 1em; text-align: left...
Get in touch with us
Leave a Message, we will call you back quickly!